Divider and combiner line-unified FET's as basic circuit functionmodules. I

The purpose is to realize miniaturized and broadband function blocks with very simple configurations for multifunction monolithic microwave circuits. FET-sized combiners and dividers, in phase and out of phase, based on a novel line-unified-FET (LUFET) concept are described and demonstrated. Some effective extensions such as extended combiner LUFETs, magic T LUFETs, and phase inverter LUFETs are also described. The extension of the basic combiner and divider LUFETs allows the realization of various circuit functions in a very small area. The area of fabricated LUFETs is between 0.1 and 0.3 mm², and the operating frequency bandwidth approaches 20 GHz. The LUFET mitigates the size and complexity problems considerably and expands the application of combiners and dividers to various multifunction microwave monolithic integrated circuits (MMICs)     

Decomposition and regeneration of methane in the absence and the presence of a hydrogen-absorbing alloy CaNi5

Suitable catalysts for the decomposition of methane into carbon and hydrogen and for the regeneration of methane by hydrogenation of the carbon have been looked for in a series of transition metals and precious metals supported on various carriers. The most active catalyst for both reactions was Ni/SiO₂. The carbon formed on this catalyst was thermodynamically less stable than graphite. The different rate equations for the decomposition of methane obtained for the fresh and carbon deposited Ni/SiO₂ suggest that the rate-determining steps are different for the two catalysts. The highest number of carbon atoms deposited per one Ni atom was 31 at 773 K. However, the number of methane molecules recovered easily at 773 K was limited to 1.5 per Ni atom.

A physical mixture of Ni/SiO₂ and CaNi₅, a hydrogen-absorbing alloy, enhanced the decomposition rate of methane, enabling the complete conversion of methane at 773 K beyond the thermodynamic limitation. The presence of CaNi₅ at 273 K separated from the catalyst in a reaction system further enhanced the decomposition of methane due to an increased hydrogen-absorbing capacity of the CaNi₅ at low temperatures. The carbon deposited on Ni/SiO₂ in this case was reactive to be hydrogenated back to methane at 773 K, giving an average 7.5 CH₄ molecules per one Ni atom.     

Value creation and decision-making in sustainable society

Manufacturing exists to create value. However, historically, discussion of economic issues in manufacturing primarily emphasizes cost. It is becoming more difficult to understand and control values of products and services in response to rapid globalization and networking. This paper presents a discussion of the nature of value considering a history of axiology, design problems of artifacts, social dilemmas, network externalities, and sustainability. Promising academic methodologies are presented herein with emphasis on transdisciplinary and synthetic approaches. Value creation models based on Emergent Synthesis and co-creative decision-making are presented. This paper involves some important study examples of service and production toward sustainable value creation in society.     

Position control for a linear slider with twin linear drives

In this paper, position control of a linear slider with twin linear drives is considered. Recently, for high‐speed response, several linear motors have been used for linear slider systems. In such a linear slider, if the linear drives are controlled individually, their position responses may undergo vibrational disturbance by interaction with the output of the motors. To control this vibration, this paper presents a dynamic model of a linear slider system which consists of two motion systems decoupled by coordinate transformation, and proposes a feedback controller which is designed for these two decoupled systems. The effectiveness of the proposed method is confirmed by experiments. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 147(4): 68–76, 2004; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10291     

Comparison of particle-phase polycyclic aromatic hydrocarbons and their variability causes in the ambient air in Ho Chi Minh City, Vietnam and in Osaka, Japan, during 2005-2006

A comparative study of polycyclic aromatic hydrocarbons (PAHs) associated with particulate matter (TSP) in the ambient air in an urban area in Ho Chi Minh City, Vietnam and in Osaka, Japan was carried out from 2005 to 2006. The objective of this study was to investigate the environmental levels, emission sources, seasonal variations and health risk of eleven PAHs in the two cities, especially Ho Chi Minh City where air pollution is becoming a serious concern. The results showed that the concentrations of TSP and total PAHs were significantly higher in Ho Chi Minh City than levels in Osaka. The concentrations of 5- and 6-ring PAHs (BeP, BbF, BkF, BaP, BghiP and InP) were much higher in TSP samples in Ho Chi Minh City than in Osaka, accounting for 82% and 51% of total PAHs, respectively. These PAHs are known to be highly carcinogenic and mutagenic in humans. Vehicular emission is suggested as one of the main pollution sources of PAHs in both cities. Motorcycles and gasoline automobiles are suggested as the main emission sources of PAHs in Ho Chi Minh City, whereas diesel automobiles are the primary source in Osaka. Seasonal variations of PAHs were observed in this study; higher concentrations of PAHs were found in the rainy season (May-December) and lower concentrations corresponded to the dry season (February-April) in Ho Chi Minh City, while higher concentrations of PAHs were observed in the winter (November-January) in Osaka. The number of sunshine hours was an important meteorological factor affecting seasonal variations of PAHs in Ho Chi Minh City, while the temperature was a main factor causing the variations of PAHs in Osaka. The high BaP equivalent concentration of 5- and 6-ring PAHs even in the ambient air is an alarming signal for harmfulness to human health and environmental quality in Ho Chi Minh City.     

超临界流体技术在苎麻织物中的应用研究

对影响超临界CO2流体处理苎麻纤维的因素，如温度、压力、时间以及助溶剂进行正交试验，对处理后的苎麻纤维的含杂情况、微结构、机械物理性能和热稳定性等性质作了测试分析。结果表明，超临界CO2流体处理苎麻织物的最佳工艺条件为：工作温度120℃、压力25MPa、时间40min、助溶剂0．1％。该处理可改善苎麻纤维的性能，提高其膨胀性，有利于后续加工，并为其进一步改性打下基础。     

The effects of di-D-fructofuranose-1,2':2,3'-dianhydride (DFA III) administration on human intestinal microbiota

Di-D-fructofuranose-1,2':2,3'-dianhydride (DFA III) was shown to enhance Ca absorption in rat and human intestine. The effects of DFA III administration (9 g per day for 4 weeks that corresponded to 3-fold the optimal dosage of DFA III) on human intestinal microbiota were studied using denaturing gradient gel electrophoresis (DGGE). The major groups of human intestinal microbiota reported previously: the Bacteroides, the Clostridium coccoides group (Clostridium cluster XIVa), the Clostridium leptum group (Clostridium cluster IV), and the Bifidobacterium group were detected. The similarity of 30 DGGE profiles based on the V3 region (before and after administration to the 15 subjects) of the 16S rDNA were calculated using Pearson's correlation based on numbers, positions and intensity of bands, and then a dendrogram of DGGE profiles was constructed by the unweighted pair group method using arithmetic average (UPGMA) clustering method. By these analyses, no difference in DGGE profiles after DFA III administration was observed in healthy subjects, while two subjects with chronic constipation showed different profiles, namely on numbers, positions and the intensity of some bands. Their stools were softer and stool frequencies increased and they obtained relief from constipation.     

Effects of sea surface temperature accuracy on offshore wind resource assessment using a mesoscale model

Offshore wind simulations were performed with the Weather Research and Forecasting (WRF) model driven by three different sea surface temperature (SST) datasets for Japanese coastal waters to investigate the effect of the SST accuracies on offshore wind simulations. First, the National Centers for Environmental Prediction Final analysis (FNL) (1° × 1° grid resolution) and the Operational Sea Surface Temperature and Sea Ice Analysis (OSTIA) (0.05° × 0.05° grid resolution) datasets were compared with in situ measurements. The results show a decrease in accuracy of these datasets toward the coast from the open ocean. Aiming at an improved accuracy of SST data, we developed a new high‐resolution SST dataset (0.02° × 0.02° grid resolution). The new dataset referred to as MOSST is based on the Moderate Resolution Imaging Spectroradiometer (MODIS) product, provided by the Japan Aerospace Exploration Agency (JAXA). MOSST was confirmed to be more accurate than FNL and OSTIA for the coastal waters. Then, WRF simulations were carried out for 1 year with a 2 km grid resolution and by using the FNL, OSTIA and MOSST datasets. The use of the OSTIA dataset for a WRF simulation was found to improve the accuracy when compared with the FNL dataset, and further improvement was obtained when the MOSST dataset was applied. The sensitivity of wind speed and wind energy density to SST is also discussed. We conclude that the use of an accurate SST is a key factor not only for realistic offshore wind simulations near the surface but also for accurate wind resource assessments at the hub height of wind turbines. Copyright © 2014 John Wiley & Sons, Ltd.     

Measurements of water distribution in through-plane direction of PEFC by using neutron radiography

Fuel gas (hydrogen gas) and oxidant gas (air) are supplied to a polymer electrolyte fuel cell (PEFC). Protons pass through the electrolyte membrane, and combine with oxygen to form water in the cathode reaction site. The generated water must be supplied appropriately to the membrane for proton conduction. On the other hand, the generated water may affect the fuel cell performances because of the blocking of oxygen from reaching the cathode reaction site. Therefore, water management in the PEFC is important, and water distribution during the operation in the through-plane direction has been of wide concern. In order to obtain the water distributions in a membrane electrode assembly (MEA) and a gas diffusion layer (GDL), a borescope system was newly employed using neutron radiography. The system could obtain the water distribution in the MEA and the GDL, and pixel size of 6.5 μm was achieved. Furthermore, the system was applied for a tilted converter system. The pixel of 1.0 μm at an angle of 81° was achieved, and improvement of the spatial resolution was confirmed.     

Integrated protocol for optimized link state routing and localization: OLSR-L

Localization protocol is important for estimating node positions in a wireless multi-hop network. Routing protocol is also important for controlling paths. In previous research, localization and routing protocols have been discussed and evaluated separately. In this paper, we propose an integrated protocol for optimized link state routing (OLSR) and OLSR based localization (ROULA). Our protocol enables simultaneous localization and routing. ROULA’s localization is performed using OLSR overhead such as hello packets and routing tables. The routing overheads and the processing procedures can be efficiently integrated. We demonstrate that the integrated protocol for ROULA and OLSR enables simultaneous localization and routing.