Aldol condensation of butanal over alkali metal zeolites

Alkali metal zeolites and metal oxides were used for the aldol condensation of n-butanal to 2-ethyl-2-hexenal. The order of activity at 150 °C and 1 atm. was: CsNaY > NaY > LiNaY > MgO >Al₂O₃. Selectivity to 2-ethyl-2-hexenal was 100% for both pure and mixed isomer feed. Infrared spectroscopic studies showed that stable catalysts were produced by propene pretreatments which blocked Lewis acid sites. Adsorption of ammonia and carbon dioxide on CsNaY during aldol condensation of n-butanal causes a decrease in rate. This result, along with the order of activity, suggests that the presence of both acid and basic sites produce higher activity than strongly basic MgO.Work performed at San Jose State University.     

Effect of fatty acids on the strain‐induced crystallization of natural rubber detected by tear energy measurements

The strain‐induced crystallization of natural rubber (NR) was investigated by the measurement of the tear energy of a crosslinked blend consisting of NR and noncrystalline styrene–butadiene rubber (SBR). When NR was dispersed into the SBR matrix, the tear energy of SBR increased at various temperatures and tear rates. After the application of the principle of time–temperature superposition to the tear energy according to the Williams–Landel–Ferry equation, two distinct curves were found for the NR/SBR blend with respect to the reduced tear rate, despite the fact that the tear energy of SBR or the SBR/SBR blend gave its own single composite curve. When the fatty acid in the NR/SBR blend was removed by acetone extraction, the tear energy of the blend drew a single composite curve. The conversion of the two curves into the single composite curve for the NR/SBR blend suggested that the tear energy depended on the strain‐induced crystallization of NR dispersed in the SBR matrix, which was suppressed by the removal of the fatty acid. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 613–619, 2005     

Development of a high‐resolution RGBW flexible display using a white organic light‐emitting diode with microcavity structure and that of a side‐roll touch panel

In this study, white organic electroluminescent devices with microcavity structures were developed. A flexible high‐resolution active‐matrix organic light‐emitting diode display with low power consumption using red, green, blue, and white sub‐pixels formed by a color‐filter method was fabricated. In addition, a side‐roll touch display was developed in combination with a capacitive flexible touch screen.     

Photocatalytic Activity of a TiO<Subscript>2</Subscript> Photocatalyst Doped with C<Superscript>4+</Superscript> and S<Superscript>4+</Superscript> Ions Having a Rutile Phase Under Visible Light

C⁴⁺ and S⁴⁺-codoped titanium dioxide (TiO₂) having a rutile phase was prepared. By doping C⁴⁺ and S⁴⁺ ions into a TiO₂ lattice, the absorption edge of rutile TiO₂ powder was largely shifted from 400 to 700 nm. 2-Methylpyridine and methyleneblue were photocatalytically oxidized at high efficiency on C⁴⁺ and S⁴⁺-doped TiO₂ under visible light at a wavelength longer than 5 nm.     

The oxidative coupling of methane on alkali- and alkaline earth-phosphate catalysts

The oxidative coupling of methane has been tested over alkali- and alkaline earth-phosphate catalysts at 700 and 775 °C with and without the introduction of a small quantity of tetrachloromethane (TCM) to the feedstream. In general, the conversion of methane was enhanced by the addition of TCM but the effect on selectivity was dependent on the catalyst being examined. The selectivity to C₂ and higher hydrocarbons and that to oxidation products have been shown to have a dependence on the cation radius/charge ratio.     

Development of low thermal expansion superalloy

Alloy 903 and Alloy 909 are well-known Fe-Co-Ni-Al-Ti-Nb alloys with controlled low thermal expan-sion, but they have some properties that can be improved. To improve stress-accelerated grain boundary oxidation embrittlement of Alloy 903 and instability of theγ phase of alloy 909, two new alloys with good stress-rupture ductility, high creep-rupture strength, high tensile strength at high temperature, and good controlled thermal expansion were developed. These property improvements were accomplished by the combination of optimizing the Fe-Co-Ni ratio of the matrix and stabilizing theγ phase with the addition of aluminum.     

Unitary equivalent classes of one-dimensional quantum walks

This study investigates unitary equivalent classes of one-dimensional quantum walks. We prove that one-dimensional quantum walks are unitary equivalent to quantum walks of Ambainis type and that translation-invariant one-dimensional quantum walks are Szegedy walks. We also present a necessary and sufficient condition for a one-dimensional quantum walk to be a Szegedy walk.     

Repeatedly foldable AMOLED display

In this study, a 5.9‐inch foldable active‐matrix organic light emitting diode (AMOLED) display was developed. A folding test was performed repeatedly. The display survived the folding test (100,000 folds) with a curvature radius of 2 mm. To protect an organic light emitting diode (OLED) against moisture, inorganic passivation layers are provided on the upper and lower sides of the flexible display. Using our transfer technology, high density passivation layers can be obtained. The measured water vapor transmission rate of the layer is 7 × 10^?6 g/m²?day or less, which improves OLED reliability. With these techniques, we have developed a book‐type display, which is repeatedly foldable like a book, and a tri‐fold display including a display area, which is foldable in three.     

Significant reduction of medical costs by differentiation therapy with all-trans retinoic acid during remission induction of newly diagnosed patients with acute promyelocytic leukemia. The Japan Adult Leukemia Study Group

OBJECTIVE: For resuscitation of hemorrhagic hypovolemia, we compared the effectiveness of (1) isotonic lactated Ringer's solution (LRS), (2) 2400 mOsm of 7.5% NaCl:6% dextran 70 (HSD), and (3) 2400 mOsm of 7.9% sodium acetate:1.9% NaCl:6% dextran 70 (HAD). DESIGN: In six randomized, blinded experiments for each solution, conscious instrumented adult sheep were hemorrhaged by removing approximately 1.8 L (42 +/- 3 mL/kg) of blood, while maintaining the mean arterial pressure (MAP) at 50 mm Hg for 2 hours. METHODS: Test solutions were infused as needed to restore the cardiac index to baseline. RESULTS: Volume requirements with HAD (236 +/- 29 mL) and HSD (244 +/- 39 mL) were significantly less (p < 0.05) than LRS (3463 +/- 234 mL). Mean arterial pressure was normalized with HSD and LRS, but not with HAD, which resulted in MAPs of 20 to 25 mm Hg less than baseline resulting from a reduced peripheral resistance. Oxygen delivery, however, was significantly higher with HAD during the resuscitation period. Acid-base balance (pH) and oxygen consumption were normalized within 5 minutes of infusion only with HAD. CONCLUSIONS: Small-volume infusion with HAD resulting in "high-flow-low-pressure" resuscitation may offer unique hemodynamic and metabolic advantages for the initial treatment of hemorrhage from trauma.     

Ion-beam processing of single crystal diamond using SOG mask

Various ion-beam etching characteristics of diamond and selectivity between diamond and spin-on-glass (SOG) were examined. The maximum selectivity of diamond and SOG was 12.7 in oxygen reactive ion-beam etching process at 100 V acceleration voltage. Using this etching condition and dot-shaped SOG mask, conical diamond field electron emitter arrays with 30 nm curvature radius, 2.58 μm base radius and 5.86 μm height were fabricated.