Two phase operation for a three phase PMSM using a control model based on a Concordia like transform associated to a classic Park transform

In aerospace applications, high reliability drives are required. For electrical drives based on three phase PMSM, a way to improve the reliability is to allow a degraded mode operation on two phases only, thanks to specifically developed power and control architectures.The aim of this paper is to present a control strategy for the two phase operation which is supported by a model based on a Concordia like transform associated to a classic Park transform. This approach maintains the advantages related to the torque control in the Park reference frame: the two active phases are still supplied with sinusoidal currents, whose amplitude is proportional to the torque. By adjusting the phase shifts between these currents and the corresponding electromotive forces (EMFs), the torque ripple can be minimized or even canceled according to the EMF shape.     

Study of oxidation after monoacrylate grafting on polyethylene

BACKGROUND: The surface properties of high‐density polyethylene and linear low‐density polyethylene were modified by grafting urethane monoacrylate monomer under UV irradiation. This graft polymerization was carried out on native substrates and on substrates pre‐treated by wet oxidation, for different oxidation times. RESULTS: As the urethane monacrylate layer is crosslinked, its grafting efficiency was checked by dissolving the polyethylene substrates in hot toluene. Grafting was evidenced by Fourier transform infrared spectroscopy of the obtained residues, which showed that both the characteristic urethane acrylate (3350 cm^?1) and polyethylene (2920, 730 and 720 cm^?1) bands were observable for any polyethylene oxidation time. For an oxidation time longer than 10 hours, acrylate grafting was homogeneous and the grafted surface was smooth with a roughness of less than 10 nm. In addition, X‐ray photoelectron spectroscopy analysis of the residues revealed that O/C had an average value of 0.19, which is lower than the value corresponding to pure acrylate (0.42), whereas N/C had an average value of 0.068, also lower than that of pure acrylate (0.09), thus confirming the grafting. CONCLUSION: A urethane monoacrylate layer was grafted on native and oxidized polyethylene films. For highly oxidized films, the grafted surfaces are smooth and homogeneous. Copyright © 2008 Society of Chemical Industry     

Ady2p is essential for the acetate permease activity in the yeast Saccharomyces cerevisiae

To identify new genes involved in acetate uptake in Saccharomyces cerevisiae, an analysis of the gene expression profiles of cells shifted from glucose to acetic acid was performed. The gene expression reprogramming of yeast adapting to a poor non-fermentable carbon source was observed, including dramatic metabolic changes, global activation of translation machinery, mitochondria biogenesis and the induction of known or putative transporters. Among them, the gene ADY2/YCR010c was identified as a new key element for acetate transport, being homologous to the Yarrowia lipolytica GPR1 gene, which has a role in acetic acid sensitivity. Disruption of ADY2 in S. cerevisiae abolished the active transport of acetate. Microarray analyses of ady2Delta strains showed that this gene is not a critical regulator of acetate response and that its role is directly connected to acetate transport. Ady2p is predicted to be a membrane protein and is a valuable acetate transporter candidate.     

Oxidation Kinetics of Carbon Deposited on Cerium‐Doped FePO4 during Dehydration of Glycerol to Acrolein

A cerium‐doped FePO₄ catalyst dehydrates glycerol to acrolein in the gas phase but carbon accumulation reduces the reaction rate with time. Reaction rates may be maintained for longer times by co‐feeding low concentrations of oxygen together with the glycerol, but the acrolein yield drops proportionally to the oxygen concentration. The catalyst is easily regenerated by air and the reaction rate is proportional to both the oxygen concentration and quantity of carbon. The carbonaceous deposits may be due to both glycerol and acrolein: when either is fed to the catalyst, the CO₂/CO ratio is close to 1; during the regeneration step, the CO₂/CO ratio is near 4. A kinetic model of first order in both oxygen concentration and adsorbed sites characterizes the transient data very well.     

Relations between structure and property of polyamide 11 nanocomposites based on raw clays elaborated by water‐assisted extrusion

Bio‐based polymers and polymer nanocomposites have known an increasing interest during the past few years. This work is focused on the elaboration and the characterization of bio‐based nanocomposites made from polyamide 11 (PA11) and nonorganomodified montmorillonite. To elaborate these materials an original elaboration process, consisting in injecting water during the extrusion, was used. Results show that thanks to this process, a well exfoliated morphology is obtained for clay contents as high as 10% wt. This was explained on the one hand by the fact that the clay is soluble in water and on the other hand by the fact that water and PA11 are miscible at high pressure and high temperature. Moreover, the morphology analyses have revealed that from 10% wt of clay, the platelets were not totally randomly distributed but they were rather organized at a mesoscopic scale. The obtaining of such clay's dispersion involves an enhancement of thermomechanical properties. For example, for a clay content of 10% wt, the Young's modulus of the material can be doubled and its degradation temperature increased. The role of the elaboration conditions on the morphology and subsequent properties of the nanocomposites are also carefully analyzed. Finally, it has been evidenced that the presence of the filler infers on both the crystalline form induced and the crystallization kinetics. In summary, this study demonstrates that, in the case of PA11 nanocomposites, the water‐assisted injection process leads to the achievement of an exfoliated morphology for clay contents as high as 10% wt that allows to obtain high performance materials and to be free from using organomodified clays. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Extinction ratio of cross-gain modulated multistage wavelength converters: model and experiments

Extinction ratio conservation, wide dynamic range, and large operating wavelength window are important features for all-optical wavelength converters. Practical converters may probably be multistage devices and have to be precisely modeled. We present an experimental analysis and phenomenological modeling of single- and multistage wavelength converters using cross-gain modulation in polarization insensitive multiquantum-well optical amplifiers. One of the studied double-stage converters is able to produce a large extinction ratio improvement with a regeneration factor higher than 1.5 for any conversion in the 1.53-1.56-/spl mu/m window. The phenomenological model yields a very good agreement with the experimental results.     

Influence of a core/shell rubber phase on the morphology and the impact resistance of a PC/SAN blend (75/25)

At 75/25 concentration ratio, bisphenol a polycarbonate (PC)/styreneacry-lonitrile copolymer (SAN) blend has poor impact resistance compared to PC/ABS. A rubber phase methacrylate-butadiene-styrene (MBS) of core/shell type was dispersed in PC/SAN blend. The morphology of the unmodified and modified blend was investigated. The influence of the acrylonitrile ratio in the SAN on the microstructure was studied. It clearly shows that core/shell resides at the interface between PC and SAN. It seems that core/shell particles enhance the adhesion between the different phases. Their presence influences the interface mobility; i.e., the coalescence of the dispersed phase observed in pure PC/SAN is considerably reduced when the MBS particles are added. The impact resistance of the samples was correlated with the morphology.