Trans-facial approaches of cancers of the ethmoid]

The development of a workload management system for use in the accident and emergency department is described. The system is capable of capturing the work all professional groups, allowing the user to roster staff according to anticipated workload, and gives accurate information on whether staffing requirements are sufficient to provide the desired standard of care.     

An automated system for the registration and comparison of photographic images in medicine

A system is presented for digitization and automated comparison of photographic images of patients obtained at different times using a high-precision video camera. The images can be acquired either directly or from slides. The two images to be compared are registered using a complex geometrical and gray-level registration model including six parameters (planar, translation, rotation, magnification, linear transformation of the gray levels). The values of the registration parameters are automatically calculated by maximizing an integer similarity measure selected for robustness. The optimization of this function with respect to the registration parameters is performed using an adaptive random search strategy. The analysis of the differences between the registered images can be carried out through visual inspection of the subtraction image in which artifacts due to remaining infrapixel shifts have been suppressed.     

Effects of chemical pollution on the activities of hepatic xenobiotic metabolizing enzymes in fish from the River Rh?ne

Polychlorobiphenyl (PCBs) levels and hepatic xenobiotic metabolizing enzyme activities were measured in fish from three locations of the River Rh?ne to study the consequences of a constant loading of PCBs from a PCB incineration plant. Our results show that levels of PCBs and enzyme activities were higher in fish living downstream from the plant than in fish from two locations upstream, suggesting enzyme induction by PCBs (known to be potent inducers in laboratory conditions). Enzyme activities were studied in spring and autumn in three species: nase (Chondrostoma nasus), roach (Rutilus rutilus) and grayling (Thymallus thymallus). Induction was observed for three cytochrome P-450-dependent monooxygenase activities (MO), i.e. 7-ethoxyresorufin O-deethylase (EROD), aryl hydrocarbon hydroxylase (AHH) and 7-ethoxycoumarin O-deethylase (ECOD). There was a close correlation between EROD and AHH activities (for all species). Glutathione S-transferase activities were also shown to be related to the PCB levels. Conversely, cytochrome P-450 content and benzphetamine N-demethylase activity were not "PCB level-dependent". This study clearly demonstrates a close relationship between PCB contamination and MO activities in fish from the field and thus clearly emphasizes the interest in MO as a monitoring tool for estimating water quality.     

Imaging through scattering media by parametric amplification of images: study of the resolution and the signal-to-noise ratio

An imaging scheme through scattering media in which parametric image amplification is used is presented. An image of a resolution chart through a solution of latex microspheres with an attenuation of 22 mean free paths is obtained with a resolution of 20 mum. The evolution of the signal-to-noise ratio with respect to the medium attenuation is studied and compared with a rough modeling of the imaging process.     

Lightweight PUF based authentication scheme for fog architecture

Fog computing improves efficiency and reduces the amount of bandwidth to the cloud. In many use cases, the internet of things (IoT) devices do not know the fog nodes in advance. Moreover, as the fog nodes are often placed in open publicly available places, they can be easily captured. Therefore, it should be ensured that even if the key material is leaked from the fog devices, the previously generated session keys and the identity of the devices can be kept secret, i.e. satisfying anonymity, unlinkability, perfect forward secrecy and resistance against stolen devices attack. Such demands require a multi-factor authentication scheme, which is typically done by providing input of the user with password or biometric data. However, in real use case scenarios, IoT devices should be able to automatically start the process without requiring such manual interaction and also fog devices need to autonomously operate. Therefore, this paper proposes a physical unclonable function (PUF) based mutual authentication scheme, being the first security scheme for a fog architecture, capable of providing simultaneously all these suggested security features. In addition, we also show the resistance against other types of attacks like synchronization and known session specific temporary information attack. Moreover, the scheme only relies on symmetric key based operations and thus results in very good performance, compared to the other fog based security systems proposed in literature.

     

Complex processing–morphology interrelationships during the reactive compatibilization of blends of poly(butylene terephthalate) with epoxide‐ containing rubber

Reactive processing of blends of poly(butylene terephthalate) (PBT) with the ethene–(methyl acrylate)–(glycidyl methacrylate) terpolymer (E–MA–GMA) is known to present a very complex reactivity since two competitive reactions take place spontaneously during melt blending, that is, blend compatibilization and rubber‐phase crosslinking. In this article, the effects of several processing parameters, such as the shear rate, the processing temperature, and the matrix viscosity, on the reactive processing of those blends were investigated in terms of the blend morphology and of the amount of copolymer formed at the blend interface. It was shown that the morphology development could be divided in two successive regimes: In the early stages of the mixing process, the particle size is essentially determined by the physical dispersion process, that is, breakup and coalescence, while, at longer mixing times, a further decrease in particle size is obtained as a result of the compatibilization reactions. The shift between the two regimes is progressive and intimately related to the processing conditions. Despite such a complexity, not only the blend morphology but also the elastic properties of the rubber particles can be controlled in a broad range by an adequate adjustment of the relative kinetics between both physical and chemical processes. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 703–718, 2004     

Contactless functional testing of grating-coupled evanescent wave (bio)chemical sensors

The contactless measurement of the sole modulus of the reflection coefficient of a grating-coupled slab waveguide sensor at three definite points of the reflection spectrum gives all necessary information for the determination of the complete set of phenomenological parameters of a waveguide grating (bio)chemical sensor thanks to a physically meaningful representation of the resonant reflection of a free space wave in the form of a circle in the complex plane. This property leads to a simple, non-destructive, wafer-scale functional testing methodology for grating-coupled (bio)chemical sensor chips.     

An iterated local search heuristic for multi-capacity bin packing and machine reassignment problems

This paper proposes an efficient Multi-Start Iterated Local Search for Packing Problems (MS-ILS-PPs) metaheuristic for Multi-Capacity Bin Packing Problems (MCBPP) and Machine Reassignment Problems (MRP). The MCBPP is a generalization of the classical bin-packing problem in which the machine (bin) capacity and task (item) sizes are given by multiple (resource) dimensions. The MRP is a challenging and novel optimization problem, aimed at maximizing the usage of available machines by reallocating tasks/processes among those machines in a cost-efficient manner, while fulfilling several capacity, conflict, and dependency-related constraints. The proposed MS-ILS-PP approach relies on simple neighborhoods as well as problem-tailored shaking procedures. We perform computational experiments on MRP benchmark instances containing between 100 and 50,000 processes. Near-optimum multi-resource allocation and scheduling solutions are obtained while meeting specified processing-time requirements (on the order of minutes). In particular, for 9/28 instances with more than 1000 processes, the gap between the solution value and a lower bound measure is smaller than 0.1%. Our optimization method is also applied to solve classical benchmark instances for the MCBPP, yielding the best known solutions and optimum ones in most cases. In addition, several upper bounds for non-solved problems were improved.     

Experimental characterization of single and two-phase flow through nickel foams

Experimental tests are performed to determine the hydraulics parameters, which characterize one-phase (air) and two-phase flow (air and water) in thin metallic foams (thickness of the order of 1.5 mm). Three types of nickel foams produced by INCO and RECEMAT are considered. The specific experimental set-up allows the study of low in-situ compression effects on the foam sample. Regarding one-phase flow, intrinsic permeability and inertial coefficient (also named passability) are determined from a semi-analytical solution of the Darcy-Forchheimer-Brinkman equation, whereas concerning two-phase flow only gas phase relative properties are estimated through the generalized Darcy-Forchheimer equation. For the used experimental flow range, the results which are in line with former studies show the importance of the inertial effects. The in-situ foam compression and tightening effects lead to higher permeability and passability values, knowing that permeability coefficient is determined with a better accuracy than the inertial coefficient.     

Designing polylactide/clay nanocomposites for textile applications: Effect of processing conditions,spinning, and characterization

An experimental study was carried out to design polylactide (PLA)-clay nanocomposites for developing fibers. PLA and 1–10 wt % of a selected organomodified bentonite (Bentone® 104-B104) were melt mixed to examine the effect of processing conditions (temperature, shear, residence time) on the morphology of performed polymer nanocomposites (PNC). Because of a good compatibility with PLA matrix, the dispersion of B104 occurred under different conditions without difficulty, and a similar morphology was obtained. The results obtained showed that at low temperature of mixing, the shear stress exerted on polymer has a key role on the extent of intercalation and delamination. Upscale experiments were further performed using optimized conditions and 4 wt % B104 was added to PLA matrix by melt blending to produce PNC for spinning. Then, the recovered PNC were melt spun to produce multifilaments yarns, and it was demonstrated that surprisingly, it is not necessary to use a plasticizer to spin a blend with 4 wt % B104. The properties of the yarns have been studied in terms of clay dispersion as well as thermal, mechanical, and shrinkage properties. B104 could be added up to 4 wt % into PLA without detrimentally sacrificing the tensile strength of melt-spun filaments, especially at high draw ratio. Interestingly, the PNC-based multifilaments were knitted and the flammability studied using cone calorimeter at 35 kW/m². A strong decrease, up to 46%, of the heat release rate was measured. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008