Hydrocarbons with a homoconjugated polyene system and their monoepoxy derivatives: Sex attractants of geometrid and noctuid moths distributed in Japan

Although several sex pheromones of the family Geometridae have been characterized, investigations on Japanese species are limited. In order to obtain more information, screening using known sex pheromones and their analogs was carried out. The (Z,Z,Z)-3,6,9-triunsaturated and (Z,Z)-6,9-diunsaturated hydrocarbons with straight C¹⁹-C²¹ chains were synthesized by the Grignard coupling reaction as a key step starting from linolenic and linoleic acids, respectively. Oxidation of the homoconjugated trienes withm-chloroperoxybenzoic acid yielded a 111 mixture of three monoepoxy derivatives that could be separated by silica gel chromatography. The chemical structure of each positional isomer was confirmed using two-dimensional NMR techniques and MS measurements, which enabled characteristic fragment ions from the isomers to be identified. Field tests using lures incorporating only one of the above six hydrocarbons or nine epoxides were carried out in a forest in Tokyo. Consequently, attraction of male moths of 14 geometrid species in addition to four species in another family, the Noctuidae, was observed. It was concluded that hydrocarbons with a homoconjugated polyene system and the monoepoxy derivatives are important components of sex pheromones produced by Japanese lepidopterous insects, particularly the geometrid moths.     

Suppression of active-oxidation of Si-C fibers (Hi-Nicalon) under reduced pressure by carbon or silica coating

The suppression of the active-oxidation of Si-C fibers (Hi-Nicalon) by carbon or silica coating were investigated at 1773 K under a reduced pressure of 1.32 Pa, through mass change determination, XRD analysis, resistivity measurement, SEM observation and tensile test. The coating of carbon and silica were conducted by heat-treating at 1773 K in CO-CO₂ gas mixtures. After exposure under a reduced pressure, the carbon coating formed in pure CO gas remained almost perfect and the retained strength of 1.7 GPa was nearly identical to that in the as-heat treated state. On the other hand, the carbon coatings formed under other conditions and all the silica coatings were completely lost during vacuum exposure. The retained strengths were in the range of 0 to 1.6 GPa. The silica film was found to be ineffective for suppressing the active-oxidation during vacuum exposure.     

The quantum relative entropy as a rate function and information criteria

We prove that the quantum relative entropy is a rate function in large deviation principle. Next, we define information criteria for quantum states and estimate the accuracy of the use of them. Most of the results in this paper are essentially based on Hiai-Ohya-Tsukada theorem.

     

Slippage of 4He Films and Precursor Phenomenon of Superfluidity

We have carried out quartz crystal microbalance (QCM) experiments for ⁴He films on an exfoliated single-crystalline graphite using a 32 kHz tuning fork, and have measured the temperature dependence of the resonance frequency and the Q value for various areal densities and oscillation amplitudes. Comparing with the previous experiments for Grafoil, the decoupling of the films due to the slippage or the superfluidity was larger than that of Grafoil, and the competition between the slippage and the superfluidity was observed in three-atom thick films. Furthermore, it was found that the slippage is suppressed gradually at higher temperature than the superfluid onset T _c , and that the relaxation time decreases at low temperatures while it obeys the Arrhenius law at high temperatures. These results suggest a precursor to the superfluidity of ⁴He films.     

Effect of Vacuum Heat Treatment on Electron-Beam-Irradiation-Cured Polycarbosilane Fibers

Electron-beam-cured polycarbosilane fibers were heat-treated at 673–1773 K in a tube evacuated to 1.3 × 10⁻¹ Pa and then exposed at 1873 K in argon. The effect of vacuum heat treatment on improving the high-temperature stability of low-oxygen SiC fibers was investigated by examining gas evolution, grain growth, surface composition, tensile strength, and morphology. The fibers heat-treated at <1173 K lost strength, because of the vigorous generation of residual hydrogen. A minute amount of oxygen in the atmosphere caused the active oxidation of SiC during heat treatment at >1673 K, resulting in severe strength degradation for the as-heat-treated fibers. Vacuum heat treatment at 1573 K provided the best characteristics in low-oxygen SiC fibers.     

Seismic stability of embankments subjected to pre-deformation due to foundation consolidation

It has been reported that the major cause of earthquake damage to embankments on level ground surfaces is liquefaction of foundation soil. A few case histories, however, suggest that river levees resting on non-liquefiable foundation soil have been severely damaged if the foundation soil is highly compressible, such as thick soft clay and peat deposits. A large number of such river levees were severely damaged by the 2011 off the Pacific coast of Tohoku earthquake. A detailed inspection of the dissected damaged levees revealed that the base of the levees subsided in a bowl shape due to foundation consolidation. The liquefaction of a saturated zone, formed at the embankment base, is considered the prime cause of the damage. The deformation of the levees, due to the foundation consolidation which may have resulted in a reduction in stress and the degradation of soil density, is surmised to have contributed as an underlying mechanism. In this study, a series of centrifuge tests is conducted to experimentally verify the effects of the thickness of the saturated zone in embankments and of the foundation consolidation on the seismic damage to embankments. It is found that the thickness of the saturated zone in embankments and the drainage boundary conditions of the zone have a significant effect on the deformation of the embankments during shaking. For an embankment on a soft clay deposit, horizontal tensile strain as high as 6% was observed at the zone above the embankment base and horizontal stress was approximately half that of the embankment on stiff foundation soil. Crest settlement and the deformation of the embankment during shaking were larger for the embankment subjected to deformation due to foundation consolidation.     

Influence of strain histories on liquefaction resistance of sand

The liquefaction resistance of sand increases with cyclic pre-shearing and pre-shaking as a result of earthquakes if the strain level in the pre-shearing is small. When larger shear strains are imposed, liquefaction resistance decreases. These complicated effects of pre-shearing histories on the liquefaction resistance are investigated in this study through a series of cyclic triaxial tests. Various combinations of cyclic stress amplitude and number of cycles of pre-shearing are examined. The tested sand is Toyoura Sand at 45% relative density, under a confining pressure of 50 kPa. Test results indicate that for the range of shear strain amplitude in pre-shearing smaller than 0.35%, the liquefaction resistance increases with pre-shearing. The increase in the liquefaction resistance depends strongly on the volumetric strain in the pre-shearing, and several effects of the shear stress amplitude and number of cycles can be negligible. Small volumetric strain of the order of 1% doubled the liquefaction resistance. Meanwhile, in the range of shear strain amplitude larger than 0.6%, the liquefaction resistance decreases. The liquefaction resistance decreases as the shear strain amplitude increases. Shear strain amplitude is one of the factors dominating this degrading effect, and the volumetric strain exerts beneficial effects to a certain extent. In this study, another series of tests are conducted to investigate the combined effects of small and large strain amplitude pre-shearing. It is observed that small shear strain pre-shearing cycles subsequent to large shear strain cycles erased the degrading effect of the latter. However, a large shear strain pre-shearing after small strain cycles degrades the beneficial effect of the small shear strain pre-shearing cycles previously applied to the specimens; however, the effects of the former small strain pre-shearing remains.     

Delamination growth mechanisms in woven glass fiber reinforced polymer composites under Mode II fatigue loading at cryogenic temperatures

The purpose of this research is to characterize the cryogenic delamination growth behavior in woven glass fiber reinforced polymer (GFRP) composite laminates subjected to Mode II fatigue loading. Mode II fatigue delamination tests were performed at room temperature, liquid nitrogen temperature (77 K) and liquid helium temperature (4 K) using the four-point bend end-notched flexure (4ENF) test method, and the delamination growth rate data for the woven GFRP laminates were obtained. The energy release rate range was determined by the finite element method. Microscopic examinations of the specimen sections and fracture surfaces were also carried out. The present results are discussed to obtain an understanding of the fatigue delamination growth mechanisms in the woven GFRP laminates under Mode II loading at cryogenic temperatures.