Production of extracellular bifidogenic growth stimulator by anaerobic and aerobic cultivations of several propionibacterial strains

Production of a bifidogenic growth stimulator (BGS) by propionic acid bacteria was investigated under anaerobic and aerobic culture conditions. To measure the concentration of extracellular BGS produced by propionic acid bacteria, we evaluated the effects of bioassay conditions using Bifidobacterium longum as a test microorganism on the formation of a growth-stimulation zone. The diameter of the growth-stimulation zone was significantly affected by both the component concentrations and the pH of a bioassay medium. The optimum component concentrations and pH of a bioassay medium were one-half of the normal values and 8.5, respectively. Using the bioassay method, we can measure the concentration of BGS produced by propionic acid bacteria ranging in concentrations from 0.1 microg/l to 1 mg/l using 1,4-dihydroxy-2-naphthoic acid (DHNA) and 2-amino-3-carboxy-1,4-naphthoquinone (ACNQ) as standards. Of six dairy propionic acid bacterial strains tested, the four strains (Propionibacterium freudenreichii ET-3, P. shermanii PZ-3, P. acidipropionici JCM 6432, and P. jensenii JCM 6433) produced BGS at a concentration range of 4-23 mg/l under the anaerobic culture conditions. Analysis of high performance liquid chromatography (HPLC) showed that more than 70% of total BGS produced in supernatant samples was DHNA and no ACNQ was produced by the strains. The effect of oxygen supply on BGS production was investigated for the four BGS-producing strains. The aerobic conditions exerted in positive effects on BGS production by only P. acidipropionici JCM 6432. The concentration of BGS obtained in the aerobic cultivation of P. acidipropionici JCM 6432 was 1.3-fold than that in anaerobic cultivation. Different properties (BGS production as well as cell growth and glucose metabolism) occurring in response to the aerobic conditions were observed, depending on the propionic acid bacterial strain used. This paper is the first report on BGS production by propionibacterial strains except for P. freudenreichii.     

Epitaxial p-type SiC as a self-driven photocathode for water splitting

Solar-to-hydrogen conversion efficiencies of water-splitting photochathodes using epitaxially grown p-type 4H-, 6H- and 3C-SiC were estimated in a two-electrode system without applying any external bias. By using electrode materials with small oxygen overpotentials as counter electrodes, the photocurrent became comparable to that observed in a three-electrode system with a suitable bias. Estimated efficiencies seem to depend on the bandgap of the SiC polytypes. For the 3C-SiC, the obtained efficiency was 0.38%, which is so far the highest value reported for SiC. We confirmed that the hydrogen volumes estimated from the photocurrent were almost the same as actual volumes observed by gas chromatography.     

Dioxin concentrations in the edible parts of Japanese common squid and saury

We examined the concentrations of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and dioxin-like polychlorinated biphenyls (dioxin-like PCBs) in muscle and gut tissues from Japanese common squid and saury. These body parts are often eaten in Japan, so it is important to measure their dioxin concentrations and evaluate the risks to consumers. The toxic equivalent (TEQ) concentrations in the squid gut samples (1.0 to 14 pg-TEQ/g fresh weight, n=3) were 50-fold larger than those in the muscle tissues (0.020 to 0.22 pg-TEQ/g fresh weight, n = 3) taken from the same samples. By contrast, the TEQ concentrations in the saury gut samples (0.35 to 0.63 pg-TEQ/g fresh weight, n=3) were only 1.1- to 1.7-fold greater than those in the muscle tissues (0.33 to 0.37 pg-TEQ/g fresh weight, n= 3) from the same samples. The TEQ contents in the squid gut tissues ranged from 60 to 990 pg-TEQ/squid, accounting for about 95% of the total dioxin content of the edible parts of the samples. By contrast, the TEQ contents in the saury gut tissues ranged from 4.4 to 12 pg-TEQ/saury, accounting for less than 25% of the total dioxin content of the edible parts of the samples. These tissues showed comparable PCDD/PCDF-congener and dioxin-like PCB-isomer profiles in both species. The results indicate that squid gut tissues occasionally contain high levels of dioxins, and consumption of this foodstuff could potentially significantly increase the dietary intake of dioxins.     

Improvement of Emissions and Burning Limits in Burner Combustion using an Injector on the Concept of Fuel-Water Internally Rapid Mixing

This study tried to apply biomass fuel to clean burner combustion under high load conditions by water addition. A newly developed injector mixes fuel rapidly with water inside of the injector with support of atomizing air. The mixture composed of three-fluid is injected as spray into a flame stabilizer of burner. Investigation of emission performance of this injector shows that the internally rapid mixing type of injector is hopeful technique to introduce water into burner combustion. Combustion by this injector emits exceedingly less particulate matters at high load. NOx emission is strongly dependent on water flow rate.     

Contamination levels of PCDDs, PCDFs and Co-PCBs in commercial baby foods in Japan

To examine dioxin contamination in commercial baby foods in Japan, congener analyses of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and coplanar polychlorinated biphenyls (Co-PCBs) were performed on 102 varieties of baby foods obtained from supermarkets in 2001-2002. The toxic equivalent quantity (TEQ) levels for dioxins in samples ranged from < 0.001 to 0.135 pg-TEQ/g wet weight when undetected or trace levels of congeners were taken as zero. Among 102 samples tested, 26 samples exceeded 0.010 pg-TEQ/g. The highest TEQ value was for "sardine, vegetables" (0.135 pg-TEQ/g), followed by "Japanese radish (daikon), sardine" (0.080 pg-TEQ/g). Thus, dioxins were detected at low levels in baby foods containing animal products such as fishes and/or dairy products.     

Functional binders for reversible lithium intercalation into graphite in propylene carbonate and ionic liquid media

Poly(acrylic acid) (PAA), poly(methacrylic acid) (PMA), and poly(vinyl alcohol) (PVA), which have oxygen species as functional groups, were utilized as a binder for graphite electrodes, and the electrochemical reversibility of lithium intercalation was examined in PC medium and ionic liquid electrolyte, lithium bis(trifluoromethanesulfonyl)amide dissolved in 1-butyl-1-methylpyrrolidinium bis(trifluoromethanesulfonyl)amide (BMP-TFSA). Columbic efficiency of 75–80% with more than 300 mAh g^?1 was achieved upon first reduction/oxidation cycle in both electrolytes using these binding polymers, which were significantly improved in comparison to a conventional PVdF binder (less than 45% of columbic efficiency for the first cycle). For the graphite-PVdF electrode, co-intercalation and/or decomposition of PC molecules solvating to Li ions were observed by the electrochemical reduction, resulting in the cracking of graphite particles. In contrast, the co-intercalation and decomposition of PC molecules and BMP cations for the first reduction process were completely suppressed for the graphite electrodes prepared with the polymers containing oxygen atoms. It was proposed that the selective permeability of lithium ions was attained by the uniform coating of the graphite particles with PAA, PMA, and PVA polymers, because the electrostatic interaction between the positively charged lithium ions and negatively charged oxygen atom in the polymer should modulate the desolvation process of lithium ions during the lithium intercalation into graphite, showing the similar functions like artificial solid-electrolyte interphase.     

Preparation of CdS-doped Glasses from Gels Containing Diethyldithiocarbamatocadmium

CdS-doped SiO₂ glasses were prepared via silica gels containing diethyldithiocarbamatocadmium Cd(S₂CN(C₂H₅)₂)₂. Heat treatment of the gels gave transparent yellow SiO₂glasses doped with hexagonal CdS crystals. In optical absorption and fluorescence spectra, the optical absorption edge and the emission peak clearly exhibited a blue shift, which was attributed to the quantum size effect of the carrier confinement, as the CdS content was decreased. In the fluorescence spectra of the CdS-doped silica glasses, the emission peak was observed only near 500 nm and not observed at longer wavelengths which were known to be present if there were sulfur vacancies.     

Daily concentrations of trace metals in aerosols in Beijing, China, determined by using inductively coupled plasma mass spectrometry equipped with laser ablation analysis, and source identification of aerosols

This paper describes the daily concentrations of trace metals and ionic constituents in the aerosol of Beijing, China from March 2001 to August 2003. Daily PM10 concentrations were also measured from September 2001 to August 2003. The daily average PM10 concentration at Beijing, China from September 2001 to August 2003 was 171+/-117 microg m(-3) (n = 673), which is 5-fold higher than at Yokohama, Japan. Trace metal concentrations were analyzed by using inductively coupled plasma mass spectrometry equipped with a laser ablation sample introduction (LA/ICP-MS), which is a rapid and simultaneous method for multi-element analysis. The daily average metal concentrations in TSP in Beijing from March 2001 to August 2003 were: Al: 3.5+/-2.4 (n = 727), Ti: 0.47+/-0.35 (n = 720), V: 0.013+/-0.010 (n = 716), Cr: 0.019+/-0.015 (n = 618), Mn: 0.24+/-0.16 (n = 730), Fe: 5.5+/-3.9 (n = 728), Co: 0.0046+/-0.0055 (n = 629), Ni: 0.022+/-0.024 (n = 680), Cu: 0.11+/-0.11 (n = 660), Zn: 0.77+/-0.60 (n = 726), As: 0.048+/-0.047 (n = 731), Se: 0.010+/-0.010 (n = 550), Cd: 0.0068+/-0.0082 (n = 709), Sb: 0.033+/-0.036 (n = 687), and Pb: 0.43+/-0.50 (n = 728) (unit, microg m(-3)). All the metal concentrations in TSP in Beijing, China were 1.7-21.8 times higher than those in TSP in the center of Tokyo, Japan. Notably, As concentrations in TSP in Beijing were 20-fold higher than those in Tokyo. Source identification of aerosols in Beijing was carried out by using the chemical mass balance (CMB) receptor model, with the daily concentration of metals in the aerosol. The major primary sources of the aerosol of Beijing were considered to be soil dust and coal combustion. Vehicle exhaust contribution tended to increase.     

Requirement for transglutaminase in progesterone-induced decidualization of human endometrial stromal cells

Differentiation of endometrial stromal cells (decidualization) is essential for embryo implantation and maintenance of pregnancy. By sequential complementary DNA subtractive hybridization, one of the messenger RNAs (mRNA) induced by progesterone in human endometrial stromal cells decidualized in vitro was identified as that of a tissue transglutaminase type II (TGase). TGase mRNA was induced within 6 h after the addition of progesterone to the culture, and the effect was dose dependent. Both the TGase inhibitor monodansylcadaverine and oligodeoxynucleotide complementary to the TGase mRNA inhibited the decidualization, as assessed by PRL production and morphological transformation. Expression of TGase mRNA in human decidua and endometria exposed to high levels of progesterone in vivo was demonstrated by Northern blotting and in situ hybridization. These data suggest that TGase is necessary for the decidualization of human endometrial stromal cells and that clarification of the mechanism of action of TGase will facilitate further insight into the diagnosis and treatment of infertility.     

On site experiments of the slanted soil treatment systems for domestic gray water.

In order to make a breakthrough for the acute problem of water shortage in the world, the key words "decentralization and re-use" are very important for new sustainable sanitation systems that will be developed. Therefore, we focused on a new treatments system called "a slanted soil treatment system" which combines a biotoilet system with a domestic grey water treatment system. Because this system is a low cost and compact system, the system can be easily introduced to homes in urban areas or in the suburbs of cities in many developing countries. In this study, we performed on site experiments carried out on Shikoku Island, Japan, for several years. We obtained the following results. The slanted soil treatment system could remove organic pollutants and total nitrogen and total phosphorus in grey water effectively. Furthermore, the system performance became high in the case of the high concentration of the influent water. The nitrification reaction and denitrification reaction were speculated to exist due to aerobic zones and anaerobic zones present in the slanted soil treatment system. The slanted soil treatment system could perform for approximately 3 years with zero maintenance. The plug flow model of 1st order reaction kinetics could describe the reaction in the slanted soil treatment system. However, it is necessary to improve the system to maintain the performance in all seasons.