Identification of the gene PaEMT1 for biosynthesis of mannosylerythritol lipids in the basidiomycetous yeast Pseudozyma antarctica

The yeast Pseudozyma antarctica produces a large amount of glycolipid biosurfactants known as mannosylerythritol lipids (MELs), which show not only excellent surface‐active properties but also versatile biochemical actions. To investigate the biosynthesis of MELs in the yeast, we recently reported expressed sequence tag (EST) analysis and estimated genes expressing under MEL production conditions. Among the genes, a contiguous sequence of 938 bp, PA_004, showed high sequence identity to the gene emt1, encoding an erythritol/mannose transferase of Ustilago maydis, which is essential for MEL biosynthesis. The predicted translation product of the extended PA_004 containing the two introns and a stop codon was aligned with Emt1 of U. maydis. The predicted amino acid sequence shared high identity (72%) with Emt1 of U. maydis, although the amino‐terminal was incomplete. To identify the gene as PaEMT1 encoding an erythritol/mannose transferase of P. antarctica, the gene‐disrupted strain was developed by the method for targeted gene disruption, using hygromycin B resistance as the selection marker. The obtained ΔPaEMT1 strain failed to produce MELs, while its growth was the same as that of the parental strain. The additional mannosylerythritol into culture allowed ΔPaEMT1 strain to form MELs regardless of the carbon source supplied, indicating a defect of the erythritol/mannose transferase activity. Furthermore, we found that MEL formation is associated with the morphology and low‐temperature tolerance of the yeast. Copyright © 2010 John Wiley & Sons, Ltd.     

Development of numerical scheme for phase field crystal deformation simulation

The phase field crystal (PFC) method is anticipated as a new multiscale method, because this method can reproduce physical phenomena depending on atomic structures in metallic materials on the diffusion time scale. Although the PFC method has been applied to some phenomena, there are few studies related to evaluations of mechanical behaviors of materials by appropriate PFC simulation. In a previous work using the PFC method, tensile deformation simulations have been performed under conditions where the volume increases during plastic deformation. In this study, we developed a new numerical technique for PFC deformation simulation that can maintain a constant volume during plastic deformation. To confirm that the PFC model with the proposed technique can reproduce appropriate elastic and plastic deformations, we performed a series of deformation simulations in one and two-dimensions. In one- and two-dimensional single-crystal simulations, linear elastic responses were confirmed in a wide strain rate range. In bicrystal simulations, we could observe typical plastic deformations due to the generation, annihilation and movement of dislocations, and the interaction between the grain boundary and dislocations. Moreover, the deformation behaviors of a nanopolycrystalline structure at high temperature were simulated and the intergranular deformations caused by grain rotation and grain boundary migration were reproduced.     

Consideration of multi‐coil type magnetization system for magnetic particle testing of omnidirectional crack in all surfaces of 3D shape test object

Mechanical parts, plants, and cross‐linkages inspected with magnetic‐particle testing (MT) are typically complex 3D shapes. In complex 3D shape portions, because a magnetizer often cannot be configured to inspection portions and the test object cannot be appropriately magnetized, there is a possibility of overlooking a crack in such an instance. Thus, MT system development that was successfully able to detect omnidirectional cracks in 3D shape portions was considered in this study's trials. Two multi‐coil type magnetizers were hence arranged face‐to‐face, and the magnetization of omnidirectional scenarios for all surfaces of 3D shape test object was evaluated.     

Mechanical behavior of a single polymer chain in a non-solvent

Mechanical properties of a single polystyrene chain in mixtures of dioxane and methanol were measured with AFM. The effect of the solubility of the surrounding liquid on mechanical behavior of a polymer chain was examined. In good and Θ solvents, the force-extension curves exhibit a freely jointed chain (FJC)-like trend with good reproducibility. In a non-solvent, the profile of force-extension curve was dependent on the extension speed: an FJC-like nature emerged at the lower speed of 200 nm/s while saw-toothed curves were obtained at the higher speed of 2000 nm/s. The shape of saw-toothed curves varied from measurement to measurement. A force relaxation was also observed in the non-solvent under a fixed extension distance after 2000 nm/s extension. The mechanical behavior in non-solvents suggests that inhomogeneous deformation of a PS chain occurs due to reduction of the chain mobility.     

Improvement of the photostability for YVO4:Bi,Eu nanoparticles synthesized by the citrate route

YVO₄:Bi³⁺,Eu³⁺ nanophosphor synthesized by the citrate route shows the photobleaching behavior, i.e., the decrease in photoluminescence intensity under the continuous irradiation of excitation light. This photobleaching property is remarkably suppressed by the washing post-treatment combined with centrifugation and the hydrothermal post-treatment. A relation between the fraction of photobleach and the amount of citrate ions coordinating to metallic ions at the surface of nanoparticles verifies that the photobleaching behavior of YVO₄:Bi³⁺,Eu³⁺ nanophosphor originates from the redox reaction between the citrate ions and V⁵⁺ in YVO₄ host crystal. The long-term light fastness test reveals that the hydrothermally treated YVO₄:Bi³⁺,Eu³⁺ nanophosphor has sufficient photostability for practical use over 15 years outside.     

Ferroelectric properties of ultrathin films of Nylon 11

Ferroelectric properties of ultrathin films of Nylon 11 were investigated. The thickness was in the range of 25 to 55 nm. Ferroelectric response was largely affected by thermal annealing and following cooling conditions. Thermal annealing at higher temperature followed by quenching in liquid nitrogen gave larger remanent polarization and smoother surface, whereas cooling down in an ambient atmosphere caused smaller remanent polarization and rough surface. Surface roughness strongly affected the polarization reversal and remanent polarization. Hydrogen bonding in crystal was also significantly related to the polarization reversal and thus remanent polarization.     

Behaviour of chromium steels in liquid Pb-55.5Bi with changing oxygen content and temperature

The behaviour of protective oxide layers on P122 steel and its welds and of ODS steel in liquid Pb_44.5Bi_55.5 (LBE) is examined under conditions of changing temperatures and oxygen concentrations. P122 (12Cr) and its welded joints are exposed to LBE at 550 °C for 4000 h with oxygen concentrations of 10⁻⁶ and 10⁻⁸ wt% (p(O₂) = 8.1 × 10⁻²³ bar and 5.2 × 10⁻²⁷ bar) which change every 800 h. It is found that like in case of constant oxygen concentration of 10⁻⁶ wt% a protective spinel layer (Fe(Fe_1−xCr_x)₂O₄) was maintained on P122 and also on its welded joint. Two experiments with exposure times of 4800 h are conducted on ODS steel, both with temperatures changing from 550 to 650 °C and back every 800 h, one experiment with 10⁻⁶ the other with 10⁻⁸ wt% oxygen in LBE. Both experiments show strong local dissolution attack after 4800 h which is in agreement with the behaviour of ODS in LBE at a constant temperature of 650 °C. However, dissolution attack is less in LBE with 10⁻⁸ wt% oxygen (p(O₂) = 3.0 × 10⁻²⁵ bar).     

Statistical Learning for Humanoid Robots

The complexity of the kinematic and dynamic structure of humanoid robots make conventional analytical approaches to control increasingly unsuitable for such systems. Learning techniques offer a possible way to aid controller design if insufficient analytical knowledge is available, and learning approaches seem mandatory when humanoid systems are supposed to become completely autonomous. While recent research in neural networks and statistical learning has focused mostly on learning from finite data sets without stringent constraints on computational efficiency, learning for humanoid robots requires a different setting, characterized by the need for real-time learning performance from an essentially infinite stream of incrementally arriving data. This paper demonstrates how even high-dimensional learning problems of this kind can successfully be dealt with by techniques from nonparametric regression and locally weighted learning. As an example, we describe the application of one of the most advanced of such algorithms, Locally Weighted Projection Regression (LWPR), to the on-line learning of three problems in humanoid motor control: the learning of inverse dynamics models for model-based control, the learning of inverse kinematics of redundant manipulators, and the learning of oculomotor reflexes. All these examples demonstrate fast, i.e., within seconds or minutes, learning convergence with highly accurate final peformance. We conclude that real-time learning for complex motor system like humanoid robots is possible with appropriately tailored algorithms, such that increasingly autonomous robots with massive learning abilities should be achievable in the near future.