Numerical analysis of characteristics of microactuators driven by liquid crystals

For the purpose of developing liquid crystalline microactuators, the transient behaviors of a nematic liquid crystal between two parallel plates have been computed for various parameters such as applied voltage, the gap between the plates, and the twist and tilt angles at the plates. The Leslie-Ericksen theory has been selected as a constitutive equation. The twist angle has an effect on the induced velocity profiles; for example, the induced flow is planar at the twist angle of 0°, while the flow has an out-of-plane component when the twist angle is not 0°. Transient behaviors of shear stress acting on the plates, the flowrate, and the maximum values of the velocity, and the tilt angle between the plates have been reported. In addition, we have investigated the effects of the applied voltage, the gap between the plates, and the tilt angle at the plates on the above-mentioned values. We can develop microactuators with arbitrary characteristics by suitably controlling the applied voltage, the size of the actuators, and the director anchoring conditions.     

Improvement of anode oxidation reaction of a fuel cell using ammonium formate with Pt‐Ir catalysis

We have attempted to develop high‐performance and safe fuel cells by using ammonium formate as a solid (powder) fuel. This solid fuel has the potential of safer transportability than liquid fuels such as methanol from the viewpoint of toxicity and flammability. In order to make use of some of the advantages of ammonium formate, we investigated the oxidation characteristics of ammonium formate with respect to a Pt electrode. Cyclic voltammograms indicate that ammonium formate has high oxidation activity with respect to a Pt electrode. We have also found that the oxidation of ammonium formate can be improved by the addition of Ir to Pt catalysts. It is highly likely that ammonium formate will be useful as a solid (powder) fuel for polymer electrolyte membrane (PEM) fuel cells. This new fuel will promote the development of safe fuel cells for PEM. © 2010 Wiley Periodicals, Inc. Electr Eng Jpn, 174(4): 45–50, 2011; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.21043     

Optimal memoryless regulator of large‐scale systems with time delays in the interconnections and the states via decentralized control

A method to construct optimal memoryless regulators of large‐scale systems with time delays in the interconnections and the states is proposed. Each feedback gain of decentralized control laws is obtained directly from solutions of simultaneous linear matrix inequalities. First, a sufficient condition for the stability of the overall closed‐ loop system is presented. Then it is extended so that the overall system and each subsystem remain stable, even if all or some of the interconnections between subsystems are cut. Lastly, a simplification of the implementation is discussed in the perspective of feedback loop reduction. © 2011 Wiley Periodicals, Inc. Electr Eng Jpn, 177(4): 42–50, 2011; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.21191     

Fabrication of submicron alumina ceramics by pulse electric current sintering using M2+ (M = Mg,Ca, Ni)-doped alumina nanopowders

Dense submicron-grained alumina ceramics were fabricated by pulse electric current sintering (PECS) using M²⁺(M: Mg, Ca, Ni)-doped alumina nanopowders at 1250 °C under a uniaxial pressure of 80 MPa. The M²⁺-doped alumina nanopowders (0–0.10 mass%) were prepared through a new sol–gel route using high-purity polyhydroxoaluminum (PHA) and MCl₂ solutions as starting materials. The composite gels obtained were calcined at 900 °C and ground by planetary ball milling. The powders were re-calcined at 900 °C to increase the content of α-alumina particles, which act as seeding for low-temperature densification. Densification and microstructural development depend on the M²⁺ dopant species. Dense alumina ceramics (relative density ≥99.0%) thus obtained had a uniform microstructure composed of fine grains, where the average grain size developed for non-doped, Ni-doped, Mg-doped and Ca-doped samples was 0.67, 0.67, 0.47 and 0.30 μm, respectively, showing that Ca-doping is the most promising method for tailoring of nanocrystalline alumina ceramics.     

Preparation of novel porous solids from alumina-pillared fluorine micas by acid-treatment

New porous solids from alumina-pillared fluorine micas (APMs), which were obtained from synthetic Na-tetrasilicic fluorine mica [NaMg_2.5Si₄O₁₀F₂], were prepared by sulfuric acid-treatment under mild conditions at 25 °C. The products were investigated by XRD, ICP, SEM, TEM and N₂ adsorption–desorption isotherm at 77 K. XRD measurements indicated that the interlayer pillared structure having a large basal spacing collapsed during the early stages of the acid-treatment. ICP analyses indicated that Al³⁺ and Mg²⁺ ions were leached out from the pillared micas during the acid-treatment. The pore properties of the leached products were found to differ from those of the mother pillared micas: the acid leaching of the pillared micas leads to the formation of mesopores around 3.2 nm in diameter. The correlation between the change in pore properties and cation elution behavior suggests that the mesopore formation results from the leaching of Mg²⁺ ions from the octahedral sheet of the pillared micas. The leached products thus obtained retained the flaky morphology of the mother pillared micas. These results show that the mild acid-treatment using APMs provides a novel route for obtaining unique mesopore solids having the large particle sizes of the mother micas.     

Miniature hybrid microwave ICs using a novel thin-film technology

A novel thin-film technology for miniature hybrid microwave ICs is presented. All passive components, such as resistors and capacitors, are fully integrated on ordinary alumina ceramic substrates using the thin-film technology with very high yield. The numbers of parts and wiring processes were significantly reduced. This technology was applied to the fabrication of Ku-band solid-state power amplifiers. This thin-film technology offers the following advantages: (1) a very high yield fabrication process for thin-film capacitors having excellent electrical characteristics in the gigahertz range (ε=3.6, Q=230 at 12 GHz) and reliability; (2) two kinds of thin-film resistors having different temperature coefficients of resistivity (TCRs) and a lift-off process to integrate them with thin-film capacitors; and (3) a matching method using the thin-film capacitor     

Intravascular ultrasound findings after successful primary angioplasty for acute myocardial infarction: predictors of abrupt occlusion

OBJECTIVES: This study sought to evaluate the intravascular structure as depicted by intravascular ultrasound after successful primary angioplasty (i.e., without thrombolytic therapy) for acute myocardial infarction and to investigate the related predictors of acute coronary occlusion. BACKGROUND: The usefulness of primary angioplasty for acute myocardial infarction is still limited by early reocclusion. There are few data regarding the intravascular ultrasound findings after primary angioplasty. METHODS: Intravascular ultrasound was performed in 27 patients after successful primary angioplasty. Repeat coronary angiography was performed 15 min later, on the following day and 1 month after angioplasty. RESULTS: Abrupt occlusion occurred in 8 of 27 patients. Angiographic variables in patients with versus those without abrupt occlusion were not significantly different. Intravascular ultrasound disclosed a significantly smaller lumen area ([mean +/- SD] 2.49 +/- 0.72 vs. 5.06 +/- 1.52 mm2, p < 0.001) and a significantly greater percent plaque area (80.5 +/- 9.1% vs. 63.7 +/- 7.8%, p < 0.001) in patients with abrupt occlusion. There was no significant difference in external elastic membrane cross-sectional area. We classified the ultrasound appearance of the intravascular structure as smooth, irregular or filled. Abrupt occlusion occurred in none of 6 patients with a smooth intravascular structure, 24% of 17 patients with an irregular structure and in all 4 with a filled structure (p < 0.05). In the latter group, the lumen was filled with bright speckled or low echogenic material, although angiography revealed excellent coronary dilation in all these arteries. CONCLUSIONS: Intravascular ultrasound revealed a narrow lumen in coronary arteries showing abrupt occlusion after successful primary angioplasty, even though angiography disclosed successful dilation. Arteries with a lumen filled with bright speckled or low echogenic material frequently develop abrupt occlusion.     

Group feature extraction based on matrix factorization from long-range office-logging data

To increase the productivity of knowledge workers, it is necessary to manage their organization so that they are motivated to collaborate with each other for their synergy. However, it is difficult for managers to grasp the explicit interactions of workers in the organization all the time. Owing to advanced communications technology, and the reduced size and improved capabilities of computers, we are able to record group behaviors as logging data in the office. The aim of this study is to extract features of group behavior from long-range office-logging data. We apply principal component analysis to the data matrix whose element is the mean travel velocity calculated from an individual’s trajectory per day. The results demonstrate the feasibility of our approach, since nontrivial informative group features can be extracted.     

Methane Oxidation on Perovskite-Type Ca(Mn1−xTix)O3−δ

X-ray photoelectron spectroscopy was performed to elucidate the catalytic activity of CH₄ oxidation on perovskite-type Ca(Mn_{1− x} Ti _x )O_3−δ synthesized at 1173 K in a flow of oxygen from a gel with citric acid and ethylene glycol. The Mn ion content decreases and the ratio of the Mn³⁺ ion in the Mn ion increases with increases in x . Ca(Mn_{1− x} Ti _x )O_3−δ has a high catalytic activity of CH₄ oxidation at x =0.4. These results indicate that the catalytic activity strongly depends on the Mn³⁺ ion content of the surface.