Development of an efficient stabiliser mixture for physical stability of nonfat unfizzy doogh

The effects of locust bean, carboxymethyl cellulose, a mixture of locust bean and carboxymethyl cellulose and Persian gum on different properties of nonfat doogh were studied over a period of 28 days. The results showed that samples containing a mixture of locust bean and carboxymethyl cellulose had the highest stability. Furthermore, the rheological behaviour of the doogh changed from Newtonian to pseudoplastic. Better sensory acceptability was shown for the treatments containing a mixture of locust bean gum and carboxymethyl cellulose. In general, it was shown that a mixture of locust bean and carboxymethyl cellulose could be of practical use in the industrial production of nonfat doogh.     

Optimal design of plate-fin heat exchangers by a hybrid evolutionary algorithm

This study explores the first application of a Genetic Algorithm hybrid with Particle Swarm Optimization (GAHPSO) for design optimization of a plate-fin heat exchanger. A total number of seven design parameters are considered as the optimization variables and the constraints are handled by penalty function method. The effectiveness and accuracy of the proposed algorithm is demonstrated through an illustrative example. Comparing the results with the corresponding results using GA and PSO reveals that the GAHPSO can converge to optimum solution with higher accuracy.     

Demand response modeling considering Interruptible/Curtailable loads and capacity market programs

Recently, a massive focus has been made on demand response (DR) programs, aimed to electricity price reduction, transmission lines congestion resolving, security enhancement and improvement of market liquidity. Basically, demand response programs are divided into two main categories namely, incentive-based programs and time-based programs. The focus of this paper is on Interruptible/Curtailable service (I/C) and capacity market programs (CAP), which are incentive-based demand response programs including penalties for customers in case of no responding to load reduction. First, by using the concept of price elasticity of demand and customer benefit function, economic model of above mentioned programs is developed. The proposed model helps the independent system operator (ISO) to identify and employ relevant DR program which both improves the characteristics of the load curve and also be welcome by customers. To evaluate the performance of the model, simulation study has been conducted using the load curve of the peak day of the Iranian power system grid in 2007. In the numerical study section, the impact of these programs on load shape and load level, and benefit of customers as well as reduction of energy consumption are shown. In addition, by using strategy success indices the results of simulation studies for different scenarios are analyzed and investigated for determination of the scenarios priority.     

Fuzzy modeling of the forced convection heat transfer from a V‐shaped plate exposed to an air slot jet

This paper focuses on the application of fuzzy logic (FL) to predict the forced convection heat transfer from V‐shaped plate internal surfaces exposed to an air impingement slot jet. The aim of the present paper is to consider the effects of the angle of a V‐shaped plate (Φ), slot‐to‐plate spacing ratio (Z/W), and Reynolds number (Re) variation on average heat transfer from the V‐shaped plate internal surfaces. The data used for developing the FL structure was obtained experimentally by a Mach‐Zehnder interferometer. The proposed FL was developed using MATLAB functions. It was observed that the average Nusselt number will be decreased with an increase in jet spacing and be increased with an increase in Reynolds number and angle of V‐shaped plate. Moreover, it is also shown that fuzzy logic is a powerful technique to use for predicting heat transfer due to its low error rate. The average error of the fuzzy predictions compared with experimental data was found to be 0.33% for this study. © 2012 Wiley Periodicals, Inc. Heat Trans Asian Res; Published online in Wiley Online Library ( wileyonlinelibrary.com/journal/htj ). DOI 10.1002/htj.21009     

Hydrogen production by silica membrane reactor during dehydrogenation of methylcyclohexane: CFD analysis

A comprehensive computational fluid dynamic model has been developed using COMSOL Multiphysics 5.4 software to predict the behavior of a membrane reactor in dehydrogenation of methylcyclohexane for hydrogen production. A reliable reaction kinetic of dehydrogenation reaction and a permeation mechanism of hydrogen through silica membrane have been used in computational fluid dynamic modeling. For performance comparison, an equivalent traditional fixed bed reactor without hydrogen removal has been also modeled. After model validation, it has been used to evaluate the operating parameters effect on the performance of both the silica membrane reactor and the equivalent traditional reactor as well. The operating temperature ranged between 473 and 553 K, pressure between 1 and 2.5 bar, sweep factor from ?6.22 to 25 and feed flow rate from 1 to 5 × 10^?6 mol/s. The membrane reactor performed better than the equivalent traditional reactor, achieving as best result complete methylcyclohexane conversion and 96% hydrogen recovery.     

A robust learning based evolutionary approach for thermal-economic optimization of compact heat exchangers

This paper presents a robust, efficient and parameter-setting-free evolutionary approach for the optimal design of compact heat exchangers. A learning automata based particle swarm optimization (LAPSO) is developed for optimization task. Seven design parameters, including discreet and continuous ones, are considered as optimization variables. To make the constraint handling straightforward, a self-adaptive penalty function method is employed. The efficiency and the accuracy of the proposed method are demonstrated through two illustrative examples that include three objectives, namely minimum total annual cost, minimum weight and minimum number of entropy generation units. Numerical results indicate that the presented approach generates the optimum configuration with higher accuracy and a higher success rate when compared with genetic algorithms (GAs) and particle swarm optimization (PSO).     

Experimental and Numerical Investigation on Free Convection From a Horizontal Cylinder Located Above an Adiabatic Surface

Steady two-dimensional free convection heat transfer from an isothermal horizontal cylinder located above an adiabatic horizontal surface is studied experimentally and numerically. Experiments are carried out using a Mach–Zehnder interferometer for the ratios of cylinder spacing from the adiabatic surface to its diameter L/D = 0, 0.1, 0.2, 0.3, 0.5, 0.7, and 0.9 and the Rayleigh number range of 500 to 15,000. Also, a specifically developed computer code based on the finite-volume method, the SIMPLE algorithm, and nonorthogonal discretization grid system is used for the solution of the mass-, momentum-, and energy-governing equations for the Rayleigh numbers ranging from 100 to 100,000 and L/D ranging from 0.1 to 1.7. The effects of the Rayleigh number and spacing from the adiabatic surface on both local and average Nusselt numbers around the cylinder are investigated. A correlation based on the numerical data for the average Nusselt number of the cylinder as a function of Rayleigh number and L/D is presented in the aforementioned ranges.     

A probabilistic risk-based approach for spinning reserve provision using day-ahead demand response program

Spinning Reserve is one of the ancillary services which is essential to satisfy system security constraints when the power system faces with a contingency. In this paper, Day Ahead Demand Response Program as one of the incentive-based Demand Response programs is implemented as a source of spinning reserve. In this regard, certain number of demands are selected according to a sensitivity analysis, and simulated as virtual generation units. The reserve market is cleared for Spinning Reserve allocation considering a probabilistic technique. A comparison is performed between the absence and existence of Day Ahead Demand Response Program from both economical and reliability viewpoints. Numerical studies based on IEEE 57 bus test system is conducted for evaluation of the proposed method.     

Modeling the free convection heat transfer in a partitioned cavity using ANFIS

In this paper, an adaptive neuro-fuzzy inference system (ANFIS) is used to predict the free convection in a partitioned cavity consisting of an adiabatic partition. The main focus of the present paper is to consider the effects of partition angle and Rayleigh number variation on average heat transfer in the partitioned cavity. The training data for optimizing the ANFIS structure is obtained experimentally. For the best ANFIS structure obtained in this study, the mean relative errors of the train and test data were found to be 0.055% and 1.735% respectively, which shows that ANFIS can predict the experimental results precisely.     

Conceptual design and statistical overview on the design of a passive DMFC single cell

A conceptual design and statistical overview about passive direct methanol fuel cells that have been fabricated from 2002 to 2013, is performed [1–70]. The major components of passive DMFCs such as: active area, type of Nafion, catalyst loading on the anode and cathode side, characteristics and designs of current collectors (CC), and also the optimum methanol concentration which resulted in the best performance are categorized and studied statistically and individually. Finally, the best combination for the design and fabrication of a reliable passive DMFC is recommended. Obtained results indicated that a MEA with 4 cm² active area, Nafion 117 and 4 mg/cm² Pt/Ru at the anode and 2 mg/cm² Pt black at the cathode (or 4 mg/cm² Pt/Ru at the anode – 4 mg/cm² Pt black at the cathode) as the catalyst loading, which is sandwiched between two stainless steel perforated current collectors that are coated by Pt (or Gold) could be a reliable design for a passive direct methanol single cell.