Three-dimensional evaluation of an independent multi-walled carbon nanotube probe by tomography with high-resolution transmission electron microscope

We evaluated an independent multi-walled carbon nanotube (MWNT) probe by using tomography with a high-resolution transmission electron microscope to verify the three-dimensional structure of the probe tip. The new method of probe evaluation revealed the following features: (i) cutting the end of the MWNT probe caused the wall structure to disintegrate and encapsulated the graphene sheets fragmented by the discharged pulse; (ii) the cap of the MWNT probe was an open cylinder covered by walls similar in shape to a rectangular slit; (iii) the grooves of the inner walls of the MWNT probe, which were created by the discharge cutting method, maintained a cylindrical shape that was different from the peeling-off mechanism.     

Power-Transformation for Ordered Categorical Data

We consider in this paper a model of asymmetric power-transformation of response probability explained by linear function of some covariates. This model includes logistic and complementary log-log transformation models as its specific case, so we can use the model to evaluate the appropriateness or the goodness of fit of these models. Then the performances of the asymmetric power-transformation model are evaluated and examined, based on data used in published literatures. And we discuss various issues of diagnoses which may occur in the process of applying the model. Further we consider alternative transformations, and then in comparison with them, we point out the advantages of the asymmetric power-transformation.

     

Dummy humanoid robot simulating several trunk postures and abdominal shapes – Report of element technologies

Development of clothing in consideration of the shape and body function of a person with spinal cord injury is an important task. Then, a dummy robot with a deformation mechanism was developed in this study for evaluating the comfortable level of clothings. Specifically, a trunk joint mechanism and an abdominal mechanism that can realize various deformations of the abdominal area and various trunk poses were developed. The trunk joint mechanism was implemented in order to simulate the seated posture of persons with spinal cord injury. The abdominal deformation mechanism was implemented using linear actuators and rotating servomotors in order to simulate abdominal obesity of persons with spinal cord injury. Further, a tactile sensor system was developed for measuring the clothing pressure on the abdominal area and evaluating the comfort or discomfort of clothing.     

Kinetic and morphological study of a magnesium ethoxide‐based Ziegler–Natta catalyst for propylene polymerization

BACKGROUND: Kinetic and morphological aspects of slurry propylene polymerization using a MgCl₂‐supported Ziegler–Natta catalyst synthesized from a Mg(OEt)₂ precursor are investigated in comparison with a ball‐milled Ziegler–Natta catalyst. RESULTS: The two types of catalyst show completely different polymerization profiles: mild activation and long‐standing activity with good replication of the catalyst particles for the Mg(OEt)₂‐based catalyst, and rapid activation and deactivation with severe fragmentation of the catalyst particles for the ball‐milled catalyst. The observed differences are discussed in relation to spatial distribution of TiCl₄ on the outermost part and inside of the catalyst particles. CONCLUSION: The Mg(OEt)₂‐based Ziegler–Natta catalyst is believed to show highly stable polymerization activity and good replication because of the uniform titanium distribution all over the catalyst particles. Copyright © 2008 Society of Chemical Industry     

Fischer–Tropsch synthesis in slurry-phase reactors over Mn- and Zr-modified Co/SiO2 catalysts

Fischer–Tropsch (F–T) synthesis was carried out in a gas-flowed slurry-phase reaction system over Mn- and Zr-modified Co/SiO₂ catalysts. A 0.5 L stirred tank slurry reactor (STSR) was used for catalyst screening and a 12.5 L slurry bubble column reactor (SBCR) was used for trial pilot operation. While using the 0.5 L reactor for catalyst screening, Co supported on the SiO₂ with an average pore size of 10 nm showed a high catalytic performance for the F–T synthesis due to the suitable Co particle size in the catalyst. Zr promoter improved the activity and Mn promoter improved the stability of Co/SiO₂ catalyst for the F–T synthesis. H₂-TPR profiles indicated that Zr and Mn promoters improved the reduction degree of Co₃O₄ particles (on SiO₂ surface) to Co⁰ active species in H₂ flow at low temperature. While using the 12.5 L reactor for trial pilot operation over Mn–Zr–Co/SiO₂ catalyst, the space-time yield (STY) of C₅₊ hydrocarbons (liquid fuel) showed almost the same values when various solvents (n-C₁₆H₃₄, n-C₁₄H₃₀, diesel from petrol station, F–T crude oil) were used. Diesel and F–T crude oil are suitable for using in a large-scaled F–T synthesis plant owing to the low prices. Mn–Zr–Co/SiO₂ catalyst achieved a STY of C₅₊ hydrocarbons larger than 1000 g-C₅₊ kg-cat^? 1 h^? 1 in the 12.5 L reactor. The production capacity of liquid fuel from the 12.5 L reactor reached to 15.6 L per day (assumed for 24 h continuous operation). The stirring was very important for the F–T synthesis both reaction in the 0.5 L reactor and reaction in the 12.5 L reactor. The shape of slurry reactor also influenced the CO conversion for the F–T synthesis: reaction in the 12.5 L SBCR gave a higher CO conversion than that of reaction in the 0.5 L STSR (at the same W/F value under the same stirring speed) because the slender column reactor (SBCR) extended the residue time of reaction gas in the slurry-phase containing catalyst.     

Characteristics of the Mach Disk in the Underexpanded Jet in which the Back Pressure Continuously Changes with Time

When the high-pressure gas is exhausted to the vacuum chamber from the nozzle, the underexpanded supersonic jet contained with the Mach disk is generally formed. The eventual purpose of this study is to clarify the unsteady phenomenon of the underexpanded free jet when the back pressure continuously changes with time. The characteristic of the Mach disk has been clarified in consideration of the diameter and position of it by the numerical analysis in this paper. The sonic jet of the exit Mach number Me=1 is assumed and the axisymmetric conservational equation is solved by the TVD method in the numerical calculation. The diameter and position of the Mach disk differs with the results of a steady jet and the influence on the continuously changing of the back pressure is evidenced from the comparison with the case of steady supersonic jet.     

Hysteretic characteristics of Wells turbine for wave power conversion

A Wells turbine blade for wave power conversion has hysteretic characteristics in a reciprocating flow. The hysteretic loop is opposite to the well-known dynamic stall of an airfoil. In this paper, the mechanism of the hysteretic behavior was elucidated by an unsteady 3-dimensional Navier-Stokes numerical simulation. It was found that the hysteretic behavior was associated with a streamwise vortical flow appearing near the blade suction surface. And also the effects of solidity, setting angle and blade thickness on the hysteretic characteristics of the Wells turbine have been discussed.     

Numerical study of radiation‐convection heat transfer

In this study, the authors attempted to introduce a simulation technique for radiation‐convection heat transfer in the high‐temperature fields of industrial furnaces, boilers, and gas turbine combustors. The convection effect was analyzed by a differential equation, but the radiation effect was analyzed by an integral equation. Thus, it was not easy to arrange both effects using the same type of equations. Then, the authors introduced the zone method and Monte Carlo method for the integral equation of the radiation effect and the finite difference method for the differential equation of the convection effect. A three‐dimensional analysis of the high‐temperature furnace was performed by this simulation technique to obtain its temperature distribution. Furthermore, another radiation‐convection heat transfer analysis in the low‐temperature living room was performed by the same technique. Finally, the authors tried to develop a computer software for radiation‐convection heat transfer and described their idea of software construction for the above. © 2002 Wiley Periodicals, Inc. Heat Trans Asian Res, 31(5): 391–407, 2002; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.10042     

Three Dimensional Separation with Spiral—Focus in a Decelerating Duct Flow （Effect of Asymmetric Inlet Boundary Layer Thickness）

An experimental apparatus was developed to study the three dimensional separated flow with spiral-foci. The internal decelerating flow was generated by the air suction from a side wall to produce the separation on an opposite-side wall. The relation between the upstream boundary layer and the generation of spiral-foci in the separation region was observed by a tuft method. As a result, it was clarified that the spiral-focus type separation could be produced on the side wall and its behavior was closely related to the vortices supplied into the separation region from the boundary layer developing along top wall or bottom one.