Evaluation of fluorescence emitting characteristics of a microparticle by illumination angle scanning utilizing a resin-based monolithic TAS chip

Microsystem Technologies - An optical sensor, such as a light waveguide implemented total analysis system (TAS), is one of the functional components that will be needed to realize a...     

Cation-Exchange Characteristics of Sintered Hydroxyapatite in the Strongly Acidic Region

The ion-exchange behavior of hydroxyapatite (Ca₁₀(PO₄)₆-OH)₂) (HAp), fired at high temperatures, has been investigated in the strongly acidic region (pH 2 and 3). According to the present study, HAp fired above 1000°C can exchange ions from Ca²⁺ to Pb²⁺, even at pH 2, without dissolution. The molar ratios of Pb²⁺/Ca²⁺ after ion exchange are approximately unity in all cases. Ion exchange occurs in a thin layer near the surface of HAp particles fired at 1300°C. After ion exchange, Pb-Cl-apatite crystals are created in the strongly acidic region (pH 2).     

Purification and characterization of a cold-active protease from psychrotrophic Serratia marcescens AP3801

Protease activity was detected in the culture medium of Serratia marcescens AP3801 grown at 10°C, which was isolated from soil collected from the top of a mountain. The enzyme, designated as CP-58 protease, was purified to homogeneity from the culture broth by ion exchange and gel filtration chromatographies. The molecular mass of the protease was 58 kDa, and its isoelectric point was close to 6.0. Maximal activity toward azocasein was observed at 40°C and from pH 6.5 to 8.0. The activity was strongly inhibited by 1,10-phenanthroline, suggesting that the enzyme is a metalloprotease. The N-terminal amino acid sequence was Ser-Leu-Asn-Gly-Lys-Thr-Asn-Gly-Trp-Asp-Ser-Val-Asn-Asp-Leu-Leu-Asn-Tyr-His-Asn-Arg-Gly-Asn (or Asp)-Gly-Thr-Ile-Asn-Asn-Lys-Pro-Ser-Phe-Asp-Ile-Ala. A search through databases for sequence homology aligned CP-58 protease with metalloprotease. The result of the cleavage pattern of oxidized insulin B-chain suggests that CP-58 protease has a broader specificity than other proteases against the peptide substrate.     

Synthesis of amphiphilic triblock copolymer of polystyrene and poly(4-vinylbenzyl glucoside) via TEMPO-mediated living radical polymerization

4-Vinylbenzyl glucoside peracetate 1 was polymerized with α,α′-bis(2′,2′,6′,6′-tetramethyl-1′-piperidinyloxy)-1,4-diethylbenzene 2 in chlorobenzene using (1S)-(+)-10-camphorsulfonic acid anhydrous (CSA) as an accelerator ([1]=0.4 M,[1]/[2]/[CSA]=75/1/1.3) at 125 °C for 5 h. The polymerization afforded poly(4-vinylbenzyl glucoside peracetate) having TEMPO moieties on both sides of the chain ends, 3, with a molecular weight (M_w,SLS) of 8500, a polydispersity index (M_w/M_n) of 1.09, and an average degree of polymerization of the 1 unit (x) of 17. Styrene (St) was polymerized with 3 in chlorobenzene at 125 °C (St/chlorobenzene=1/2, w/w). The polymerization successfully afforded polystyrene-poly(4-vinyl glucoside peracetate)-polystyrene, 4, when the polymerization time was below about 2 h. Polymer 4 with the M_w,SLS of 12,500, 17,900, and 29,400, the compositions (y-x-y) of 20-17-20, 45-17-45, and 100-17-100, and the M_w/M_n of 1.12, 1.14 and 1.17 were modified by deacetylation using sodium methoxide in dry-THF into polystyrene-poly(4-vinyl glucoside peracetate)-polystyrene, 5. The solubility of polymer 5 was examined using a good solvent for polystyrene such as toluene and for the saccharide such as H₂O.     

Hydrodynamics of a spouted bed with a porous draft tube containing a small amount of finer particles

A small-size spouted bed with a porous draft tube was employed to obtain hydrodynamic data of binary mixtures of glass beads for a range of operating conditions and design factors. In this case, a small amount of finer particles was added mostly to the large majority of coarser particles. Under this condition, minimum spouting velocity, bed pressure drop, hold-up of solid particles within a draft tube, gas flow rate through the annulus and solids circulation rate were determined by changing the total gas flow rate and the mass fraction of finer particles as operating parameters, and by changing the height of the entrainment zone and the draft tube diameter as geometric parameters. The results show that the gas flow rate through the annulus increases by increasing the distance between the gas inlet nozzle and the bottom of the draft tube, that is, the height of the entrainment zone, but decreases with increasing draft tube diameter and mass fraction of finer particles. The porous draft tube shows a higher gas flow rate through the annulus than the non-porous draft tube, particularly in the case of the low height of the entrainment zone. The solids circulation rate increases with increasing gas velocity, the height of the entrainment zone and the porous draft tube diameter. Moreover, the porous draft tube leads to a higher solids circulation rate than the non-porous draft tube.     

Effects of substrate surface finish and substrate material on durability of thermally sprayed WC cermet coating in rolling with sliding contact

In this study, using a two-roller testing machine, the authors examined the surface durability of thermally sprayed WC-Cr-Ni cermet coating in lubricated rolling with sliding contact conditions. The coating was formed onto the axially ground, blasted and circumferentially ground roller specimens made of a thermally refined carbon steel or an induction hardened carbon steel by means of the high energy type flame spraying (Hi-HVOF) method. The WC cermet coated roller finished to a mirror-like condition was mated with the carburized steel roller without coating having a surface roughness of Ry=3.05.0 μm. In the experiments, a maximum Hertzian stress of P_H=0.6 or 0.8 GPa was applied for the thermally refined carbon steel roller and P_H=1.4 GPa was applied for the induction hardened carbon steel roller in line contact condition. As a result, it was found that in the case of induction hardened steel substrate, the coated roller generally exhibits a long life without any serious damage and the surface durability is hardly affected by the substrate surface finish, while in the case of thermally refined steel substrate, the durability of coated roller is lowered and the life to flaking is very short particularly when the substrate surface is circumferentially ground and the mating surface is rough. The surface durability of coated roller was also compared with the durability of steel roller without coating. Finally, in order to discuss the durability of coated roller, the elastic-plastic behavior of the subsurface layer under repeated rolling with sliding contact was analyzed using a finite element method (FEM).     

Metallurgical aspects on the formation of self-organized anodic oxide nanotube layers

The present work reports how metallurgical factors such as grain size and chemical composition of substrate affect the current behavior during anodization and the morphology of resulting formed oxide layers. The grain size of pure Ti sheet is controlled by the accumulative roll-bonding (ARB) process. Tubular oxide layers are formed on the ARB-processed Ti sheets with different grain sizes, but grain size does not affect the length, diameter of tubes and the degree of tube arrangement. The effect of chemical composition is examined using Ti-Zr alloys (Ti-20Zr, Ti-50Zr, Ti-80Zr) that can consist of a single phase, meaning that homogeneous tube formation can be achieved. With increasing Zr content in the alloys, tube diameter decreases while tube length increases. For the Ti-50Zr and Ti-80Zr, self-organization is achieved on two size scales, that is, nanotube arrays with two distinct diameters are observed. TEM observation revealed that anodic oxide layers are in crystalline state only in the case of pure Zr.     

Determination of levulinic acid in soy sauce by liquid chromatography with mass spectrometric detection

A novel method using liquid chromatography coupled with mass spectrometry (LC–MS) was developed for the determination of levulinic acid (LV) in soy sauces to identify the addition of acid hydrolyzed vegetable protein (acid-HVP). One hundred percentage naturally brewed soy sauce (NBS) and enzymatic hydrolyzed vegetable protein (enzymatic HVP) did not contain LV (<0.01 mg/mL). There was apparent detection of LV in acid-HVP and blended soy sauce with acid-HVP (2.98–21.66 mg/mL). Gas chromatography (GC) and high performance liquid chromatography (HPLC) at 430 nm methods were also investigated. The results by GC gave similar data to those by LC–MS. In enzymatic HVP, LV was detected by HPLC at 430 nm, but it was confirmed that the detected component was not in fact LV by mass spectrometric identification of the isolated peak compound. We found that LV is under the detection limit in enzymatic HVP. This study showed that LV is below the detection limit in NBS and enzymatic HVP and is apparently detected in acid-HVP and blended soy sauces with acid-HVP. These results indicate that LV is a practical index of blend with acid-HVP and also corresponds with the JAS (Japanese Agricultural Standard) or CNS (Chinese National Standard) criteria in which the presence of LV in soy sauces indicates adulteration with acid-HVP. The LC–MS method is analytically optimal for the precise determination of LV, because peak misidentification may be practically eliminated.     

Thermoluminescence as a new research tool for the evaluation of geothermal activity of the Kakkonda geothermal system, northeast Japan

The thermoluminescence glow-curve of quartz in volcanic and pyroclastic rocks of the Miocene and Quaternary in the Kakkonda geothermal field was divided into L (low), M (medium) and H (high) peaks in order of increasing temperature. Thermoluminescence emission is independent of stratigraphic boundaries but it is closely related to surface geothermal manifestations. Thermally stimulated processes of thermoluminescence caused by natural annealing occurred in the Quaternary after the eruption of the Tamagawa Welded Tuffs; radiation storage processes then began, as a consequence of the temperature drop. Thermoluminescence behavior indicates natural temperature manifestations, together with the paleo-temperature history.The H peak was thermally stable compared to the L and M peaks, and the area within which the relative intensity of the H peak is less than 5% coincides with the surface zone where dominant fluid flow is convective. In addition, L and M peaks indicate that a relatively low-temperature fluid mixes with the hot upflow around the western margin of the ascending flow zone.Thermoluminescence characteristics reflect paleo-temperature history and are related to geothermal fluid flow. Thermoluminescence is an effective exploration technique for evaluating natural temperature manifestations and subterranean heat flow in geothermal systems.