Experimental investigation of discharge characteristics of a surface‐wave‐produced planar plasma

Experimental investigations of the discharge characteristics of planartype surfacewaveproduced plasmas (SWP) have been carried out. On this apparatus, the efficiency of microwave power absorption into the plasma depends strongly on the thickness of the dielectric window. Especially at a thickness of 12 mm, it has been found that more than 80% of microwave power is absorbed into the plasma. In order that the uniform power absorption is brought about effectively in a wide range of gas pressures, the dielectric waveguide that is placed above the dielectric window needs the air gap between them. These experimental results will enable us to improve the apparatus configuration to achieve better operational performances of surface wave plasmas. © 2001 Scripta Technica, Electr Eng Jpn, 138(3): 9–18, 2002     

Development of a distributed power outage scheduling system by using bee‐gent

The Power Outage Scheduling Problem is a distributed constraint satisfaction problem in which scattered local power stations have to make schedules that are consistent with one another. However, synchronous backtrack algorithms, a well‐known method for distributed constraint satisfaction problems, have difficulty handling rapid schedule adjustments and impartial assignment of power station schedules. Thus, we propose two kinds of heuristics: parallel assignment and multiple priority strategies. We also developed a distributed system for the power outage scheduling problem which makes use of the above heuristics in order to ensure efficiency. The system is based on Bee‐gent (Bonding and Encapsulation Enhancement aGENT framework) and consists of schedulers for each power station and mediation agents which have cloning and merging functions to support the implementation of the heuristics. The result of the experiment shows an improvement when handling rapid adjustment and impartiality issues and indicates that this improvement is provided with reasonable computational overhead. © 2002 Wiley Periodicals, Inc. Electr Eng Jpn, 139(3): 62–72, 2002; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.1161     

Surgery for cholelithiasis in cirrhotic patients

Although biliary tract surgery for cholelithiasis is performed frequently, cirrhotic patients require special consideration. The prevalence of postoperative severe complications, such as hepatic failure and biliary peritonitis caused by insufficient fistula formation after removal of the T-tube, is higher than non-cirrhotic patients. We suggest that definitive surgery can be carried out safely, in Child's A and B cirrhotic patients, either electively or as an emergency. However, a more conservative approach is advisable in Child's C patients with acute conditions and definitive surgery is recommended as an elective procedure after liver function has improved. And for the treatment of choledocholithiasis in patients with severe cirrhosis, avoiding surgical intervention through the use of such techniques as endoscopic papillotomy is recommended whenever possible.     

Strength Development in Phosphate-Bonded Calcium Aluminate Cements

The chemical reaction at room temperature between calcium aluminate cement (CAC) and NH₄H₂PO₄-based fertilizer solution causes the formation of ammonium calcium pyrophosphate (AmCPP) as an amorphous cementitious phase. This phase was responsible for the development of strength in rapid-setting phosphate-bonded cement (PBC) specimens. Hydrothermal treatment of PBC at 200°C led to phase transformations of AmCPP and CAC into crystalline hydroxyapatite as the major phase and anorthite as the minor one. The moderate growth of these interlocked crystals in the interspaces of amorphous phases played an important role in creating a dense microstructure, thereby conferring a very high strength to the PBC. In contrast, an excessive crystal growth, which caused the formation of porous microstructure, resulted in a reduction in strength.     

Metalation states versus enzyme activities of Cu, Zn-superoxide dismutase probed by electrospray ionization mass spectrometry

Cu, Zn-superoxide dismutase (SOD-1), an enzyme that catalyzes the disproportionation reaction of superoxide to produce oxygen and hydrogen peroxide, thereby protecting cells from oxidative stress, is a homodimer that coordinates one copper and one zinc ion per monomer. Cu (2+) and Zn (2+) ions play important roles in enzyme activity and structural stability, respectively. In addition, dimer formation is also essential for fulfilling the function of SOD-1. We here report on the reconstitution and enzyme activities of several metalation states of SOD-1 (Cu 4-, Cu 3Zn-, and Cu 2Zn 2-homodimers). Each metalation state of the reconstituted SOD-1 could be unambiguously differentiated by electrospray ionization mass spectrometry, the metal ions of which had been completely replaced by 99 atom % (63)Cu and (68)Zn stable isotopes. It was found that (1) the Cu 4-dimer possessed 84% of the activity of the native enzyme, (2) the Cu-site resisted being coordinated with Zn (2+) ions while the Zn-site could be bound with Cu (2+) ions, and (3) the simultaneous addition of the Cu (2+) and Zn (2+) ions to generate a fully metalated form produced the multiply metalated SOD-1 (Cu 4-, Cu 3Zn-, and Cu 2Zn 2-dimers), which were clearly distinguishable from one another by the use of the stable isotopes, while the sequential addition of Zn (2+) followed by the Cu (2+) ion predominantly produced a Cu 2Zn 2-dimer comparable to the native enzyme.     

Effects of substrate surface finish and substrate material on durability of thermally sprayed WC cermet coating in rolling with sliding contact

In this study, using a two-roller testing machine, the authors examined the surface durability of thermally sprayed WC-Cr-Ni cermet coating in lubricated rolling with sliding contact conditions. The coating was formed onto the axially ground, blasted and circumferentially ground roller specimens made of a thermally refined carbon steel or an induction hardened carbon steel by means of the high energy type flame spraying (Hi-HVOF) method. The WC cermet coated roller finished to a mirror-like condition was mated with the carburized steel roller without coating having a surface roughness of Ry=3.05.0 μm. In the experiments, a maximum Hertzian stress of P_H=0.6 or 0.8 GPa was applied for the thermally refined carbon steel roller and P_H=1.4 GPa was applied for the induction hardened carbon steel roller in line contact condition. As a result, it was found that in the case of induction hardened steel substrate, the coated roller generally exhibits a long life without any serious damage and the surface durability is hardly affected by the substrate surface finish, while in the case of thermally refined steel substrate, the durability of coated roller is lowered and the life to flaking is very short particularly when the substrate surface is circumferentially ground and the mating surface is rough. The surface durability of coated roller was also compared with the durability of steel roller without coating. Finally, in order to discuss the durability of coated roller, the elastic-plastic behavior of the subsurface layer under repeated rolling with sliding contact was analyzed using a finite element method (FEM).     

Effects of carbon source on denitrification efficiency and microbial community structure in a saline wastewater treatment process

Two different denitrifying reactors were monitored in order to evaluate the effects of carbon source on denitrification efficiency and microbial community structure under various saline conditions. Nitrogen removal performances were determined when salinity concentrations increase gradually in acetate- or methanol-fed denitrifying reactor. As a result, acetate-fed process attained high nitrate removal at 0-10% NaCl, while methanol was proven beneficial electron donors at 0-3% NaCl. A parallel analysis of T-RFLP and cloning in the acetate-fed sludge showed that a specialized microbial population (i.e. the genera Halomonas and Marinobacter) adapted to a high saline environment. Meanwhile, there were no major changes of bacterial populations in the methanol-fed reactor at 4% NaCl, although the relative abundances of the genera Azoarcus and Methylophaga increased when salinity concentration was at 1-3% NaCl, indicating that methanol-utilizing populations in activated sludge was unable to adapt to a high saline environments (>4% NaCl).     

Reliability-based design for earth-fill dams against severe natural disaster events

The maintenance of geotechnical structures, such as earth-fill dams, is required as a countermeasure against severe natural disasters, particularly earthquakes and heavy rains. The reliability-based analysis introduced here is in response to the recent demand for low-cost improvements.First, a statistical model of N values was determined from Swedish weight sounding (SWS) tests to present the spatial variability of the soil strength. Then, a reliability-based analysis of embankments was conducted by considering the variability of the internal friction angle derived from N value, and the seismic hazard for the Nankai Trough. The next step was to evaluate the probability of the overflow of earth-fills during heavy rains. The rainfall intensity was considered as a probabilistic parameter, and the various rainfall patterns were tested by the proposed method. Finally, the total risk due to both earthquakes and heavy rains was evaluated for an earth-fill site. As a result, the possibility for the practical use of the proposed method in making plans for the maintenance of deteriorated earth-fill dams was verified.     

Reconnaissance report on geotechnical damage caused by a localized torrential downpour with emergency warning level in Kyushu,Japan

Kumamoto and Kogoshima prefectures are located in the southern Kyushu district of western Japan. In July 2020, a warm, humid air front triggered the delayed rains of the rainy season, resulting in torrential rains in many parts of Japan, especially in Kyushu. In particular, heavy downpours occurred in the southern Kyushu district on July 4th, causing severe damage to much of the infrastructure. Details could not be analyzed as usual because some branch office of local government were also damaged by floods. The spatial distribution of precipitation in the Kuma River basin, in the southern part of Kumamoto, was characterized by the uniformity of 400–500 mm on July 3rd and 4th. Finally, emergency warnings of torrential rain were issued for the southern Kumamoto and the northern Kagoshima Prefectures by Japan Meteorological Agency (JMA) at 4:50 a.m., July 4th, 2020. Then, the active rain front gradually shifted towards northern Kyushu. Again, torrential rain fell on northern Kyushu in the afternoon due to a stagnant rainy season front, and the JMA issued an emergency warning for a localized torrential downpour for parts of Fukuoka, Saga and Nagasaki prefectures at 4:30 pm. Gradually, the damage status involving geodisasters such as several types of slope failures, road subsidence, damage of the river levee was reported by local governments in each area where there had been emergency warnings.Based on the brief report of the pre-investigation team from the Kyushu branch of the Japan Geotechnical Society (JGS) in the first week after the disaster on July 4th, the geo-research teams investigated the following: 1) landslides; 2) damaged roads; 3) damaged river levees, and 4) any geotechnical infrastructures which were partially damaged and may be even more severely damaged by the next torrential rain. This reconnaissance report introduces the geological features in Kyushu, the analysis of precipitation distribution and geotechnical damages on the slope failures, road failures and river embankments based on reports obtained from July 4th to August 31st, 2020.     

Damage to and recovery of coastlines polluted with C-heavy oil spilled from the Nakhodka

The damage to and recovery of the Japanese coastline from Suzu, Ishikawa Prefecture to Mikuni, Fukui Prefecture was investigated visually over three years after a C-heavy oil spill from the Russian tanker "Nakhodka" in the Japan Sea on January 2, 1997. The beached C-heavy oil tended to remain for a long time on coasts of bedrock and boulder/cobble/pebble but it was removed rapidly from coasts of gravel/sand and man-made structures such as concrete tetrapods. On the coasts of the latter type, wave energy appeared to be the main force removing the oil. One year after the spill, C-heavy oil tended to remain strongly on the sheltered coasts of bedrock and boulder/cobble/pebble. Even on coasts of this type, the contamination was remarkably absent by 2 years after the spill. The concentration levels of polycyclic aromatic hydrocarbons (PAHs) in oil lumps, sand and seawater were monitored during 3 years following the spill. The concentrations of PAHs having 2 or 3 rings decreased more quickly than did those of PAHs having 4 or more rings, suggesting that volatilization was the main cause of the decrease. On the other hand, the concentrations of PAHs having 4 to 6 rings did not start to decrease until 7 months after the spill. The main cause of the decrease seemed to be photolysis. The concentration of BaP in seawater off the polluted coasts was high 1 month after the spill and then decreased. Three years after the spill, the level fell to the sub ng/L level, which was as low as the level in seawater along unpolluted clean coasts in Japan. The concentration of BaP in greenling was higher than the normal level only during the first two months after the spill. These results suggest that the coastlines in Ishikawa and Fukui Prefectures that were polluted with C-heavy oil recovered in 3 years.