Synthesis and Some Properties of Panulose. A New Keto-Oligosaccharide

During the studies on the transformation of oligosaccharides in alkaline solution, we obtained a new keto-trisaccharide. This oligosaccharide was obtained by the Lobry de Bruyne-Alberda van Ekenstein transformation of panose. The new saccharide was separated from panose by paper chromatography and cellulose column chromatography using the solvent system containing boric acid. The trisaccharide contains one mole of fructose moiety in its structure. The results of the partial hydrolysis by acids and enzymes suggested the structure of 6²-α-glucosyl maltulose 0-α-D -glucopyranosyl-(1→6)-0-α-D -Glucopyranosyl-(1→4)-D -Fructosel. The novel saccharide was named panulose, as this was obtained by the isomerization of panose.     

Development and Use of a Kinetical and Real-Time Monitoring System to Analyze the Replication of Hepatitis C Virus

In microbiological research, it is important to understand the time course of each step in a pathogen’s lifecycle and changes in the host cell environment induced by infection. This study is the first to develop a real-time monitoring system that kinetically detects luminescence reporter activity over time without sampling cells or culture supernatants for analyzing the virus replication. Subgenomic replicon experiments with hepatitis C virus (HCV) showed that transient translation and genome replication can be detected separately, with the first peak of translation observed at 3–4 h and replication beginning around 20 h after viral RNA introduction into cells. From the bioluminescence data set measured every 30 min (48 measurements per day), the initial rates of translation and replication were calculated, and their capacity levels were expressed as the sums of the measured signals in each process, which correspond to the areas on the kinetics graphs. The comparison of various HuH-7-derived cell lines showed that the bioluminescence profile differs among cell lines, suggesting that both translation and replication capacities potentially influence differences in HCV susceptibility. The effects of RNA mutations within the 5′ UTR of the replicon on viral translation and replication were further analyzed in the system developed, confirming that mutations to the miR-122 binding sites primarily reduce replication activity rather than translation. The newly developed real-time monitoring system should be applied to the studies of various viruses and contribute to the analysis of transitions and progression of each process of their life cycle.     

Deep Phenotyping of Superficial Epidermolytic Ichthyosis due to a Recurrent Mutation in KRT2

Superficial epidermolytic ichthyosis (SEI) is an autosomal dominant inherited ichthyosis. SEI is caused by mutations in KRT2 and frequently shows erythroderma and widespread blistering at birth. We report the clinical manifestations of two patients from a Japanese family with SEI caused by a hotspot mutation, p.Glu487Lys, in KRT2. In addition, we summarize previous reports on SEI patients with the identical mutation. One of the two patients had disease onset at the age of 7 months. The other patient’s age of onset is unknown, but it was in childhood. Neither of the two patients showed erythroderma. To perform deep phenotyping, we studied the age of onset and the frequency of erythroderma in 34 reported SEI cases with the p.Glu487Lys mutation, including the present cases. Among the cases with sufficient clinical information, 44.4% of the cases that were due to p.Glu487Lys in KRT2 occurred at birth. Erythroderma was observed in 11.1% of the cases with p.Glu487Lys in KRT2.     

Sulfated Hyaluronan Binds to Heparanase and Blocks Its Enzymatic and Cellular Actions in Carcinoma Cells

We examined whether sulfated hyaluronan exerts inhibitory effects on enzymatic and biological actions of heparanase, a sole endo-beta-glucuronidase implicated in cancer malignancy and inflammation. Degradation of heparan sulfate by human and mouse heparanase was inhibited by sulfated hyaluronan. In particular, high-sulfated hyaluronan modified with approximately 2.5 sulfate groups per disaccharide unit effectively inhibited the enzymatic activity at a lower concentration than heparin. Human and mouse heparanase bound to immobilized sulfated hyaluronan. Invasion of heparanase-positive colon-26 cells and 4T1 cells under 3D culture conditions was significantly suppressed in the presence of high-sulfated hyaluronan. Heparanase-induced release of CCL2 from colon-26 cells was suppressed in the presence of sulfated hyaluronan via blocking of cell surface binding and subsequent intracellular NF-κB-dependent signaling. The inhibitory effect of sulfated hyaluronan is likely due to competitive binding to the heparanase molecule, which antagonizes the heparanase-substrate interaction. Fragment molecular orbital calculation revealed a strong binding of sulfated hyaluronan tetrasaccharide to the heparanase molecule based on electrostatic interactions, particularly characterized by interactions of (−1)- and (−2)-positioned sulfated sugar residues with basic amino acid residues composing the heparin-binding domain-1 of heparanase. These results propose a relevance for sulfated hyaluronan in the blocking of heparanase-mediated enzymatic and cellular actions.     

Mechanism of simultaneous tripping of ground directional relays in a 6.6‐kV distribution system

In Kyushu Electric Power's 6.6‐kV distribution system, after a single‐phase ground fault occurred in the circuit of a distribution line, we experienced a phenomenon in which the analogue ground directional relays of the other circuits linked to the same bank were simultaneously tripped. In this paper, focus is placed on the mechanism and possibility of simultaneous tripping of ground directional relays. This mechanism was examined in an experiment carried out using an analogue simulator. The results of the test revealed that such simultaneous tripping was attributable to the neutral instability phenomenon of grounding potential transformers installed in an isolated neutral system. © 2010 Wiley Periodicals, Inc. Electr Eng Jpn, 171(2): 23–30, 2010; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20919     

Arraying needle-like TiO2 particles in a composite film by applying ac bias and its transmittance anisotropy

In an effort to improve energy-efficient windows, we experimented with a precursor slurry composite by using needle-like TiO₂ particles as the filler in a urethane matrix. Applying dc bias to the slurry failed to array the needle-like particles in the composite and to deposit on the film surface because of electrophoretic movement. However, applying ac bias of ±5 V to the precursor slurry composite for 12 h resulted in the needle-like TiO₂ particles being arrayed in the composite in a direction normal to the film surface. This resulted in an improvement in the energy efficiency of the material through an angular dependence of transmittance in the visible–near-infrared range.     

Thermoelectric Properties of Multifilled Skutterudites with La as the Main Filler

Bulk multifilled n- and p-type skutterudites with La as the main filler were fabricated using the spark plasma sintering (SPS) method. The thermoelectric properties and thermal stability of these skutterudites were investigated. It was found that the interactions among the filling atoms also play a vital role in reducing the lattice thermal conductivity of the multifilled skutterudites. ZT = 0.76 for p-type La_0.8Ba_0.01Ga_0.1Ti_0.1Fe₃CoSb₁₂ and ZT = 1.0 for n-type La_0.3Ca_0.1Al_0.1Ga_0.1In_0.2Co_3.75Fe_0.25Sb₁₂ skutterudites have been achieved. Furthermore, the differential scanning calorimetry (DSC) results show that there is no skutterudite phase decomposition till 750°C for the La_0.8Ba_0.01Ga_0.1Ti_0.1Fe₃CoSb₁₂ sample. The thermal stability of the La_0.8Ba_0.01Ga_0.1Ti_0.1Fe₃CoSb₁₂ skutterudite is greatly improved. Using the developed multifilled skutterudites, the fabricated module with size of 50 mm × 50 mm × 7.6 mm possesses maximum output power of 32 W under the condition of hot/cold sides = 600°C/50°C.     

Photoluminescence measurements on undoped CdZnTe grown by the high-pressure bridgman method

The low temperature photoluminescence of Cd_0.91Zn_0.09Te grown by the high-pressure Bridgman (HPB) method exhibits a neutral donor bound exciton emission (D⁰X) at 1.65603 eV with its excited state (D⁰X^*) at 1.65798 eV and neutral acceptor bound exciton emissions (A⁰X) at 1.64566 eV and 1.65201 eV. Assuming a direct generation and subsequent relaxation of excitons at the D⁰X^* state, we demonstrate that the temporal evolution of the above emission bands is well reproduced by a set of rate equations. The resultant radiative-lifetime of 1.4 ns for the D⁰X and 1.5 and 2.0 ns for the A⁰Xs are compared with various CdZnTe's (CZTs) grown by the other methods to demonstrate the particular nature of the HPB CZT.     

Removal of Interlayer Water of two Ti3C2Tx MXenes as a Versatile Tool for Controlling the Fermi-Level Pinning-Free Schottky Diodes with Nb:SrTiO3

Striving for the sixth-generation communication technology discovery, semiconductors beyond Si with wider bandgaps as well as non-conventional metals are actively being sought to achieve high speeds whilst maintaining devices miniaturization. 2D materials may provide the potential for downsizing, but their functional advantage over existing counterparts still longs to be discovered. Along that path, surface-adsorbed or bulk-intercalated water molecules remaining after wet-chemical synthesis of 2D materials are generally seen as obstacles to high-performance achievement. Herein, the control of such water within the interlayers of solution-processed metallic 2D titanium carbide (MXene) by vacuum annealing duration is demonstrated. Moreover, the impact of water removal on work function (WF) and functional terminations is unveiled for the first time. Furthermore, the usefulness of such water for controlling a novel Schottky diode in contact with an n-type oxide semiconductor, niobium-doped strontium titanate (Nb:SrTiO₃) is observed. The advantage of MXene compared to conventional gold as facile processing, WF tunability, and lower turn-on voltage in the Schottky anode application is highlighted. This fundamental study shows the way for a novel Schottky diode preparation in atmospheric conditions and provides implications for further research directions aiming at commercialization.     

A 150 ns 16-Mb CMOS SRAM with interdigitated bit-line architecture

Circuit techniques for a reduced-voltage-amplitude data bus, fast access 16-Mb CMOS SRAM are described. An interdigitated bit-line architecture reduces data bus line length, thus minimizing bus capacitance. A hierarchical sense amplifier consists of 32 local sense amplifiers and a current sense amplifier. The current sense amplifier is used to reduce the data bus voltage amplitude and the sensing of the 16-b data bus signals in parallel. Access time of 15 ns and an active power of 165 mW were achieved in a 16-Mb CMOS SRAM. A split-word-line layout memory cell with double-gate pMOS thin-film transistors (TFTs) keeps the transistor width stable while providing high-stability memory cell characteristics. The double-gate pMOS TFT also increases cell-storage node capacitance and soft-error immunity