Stimulation of THP-1 Macrophages with LPS Increased the Production of Osteopontin-Encapsulating Exosome

Osteopontin (OPN) mediates bone remodeling and tissue debridement. The OPN protein is cleaved, but it is unclear how full-length (FL)-OPN or its cleaved form perform their biological activities in target cells. We, therefore, performed the molecular characterization of OPN in exosomes (Exo). The Exo were isolated from lipopolysaccharide (LPS)-stimulated phorbol 12-myristate 13-acetate (PMA)-differentiated THP-1 macrophages. The Exo were also isolated from PMA-differentiated THP-1 macrophages. The Exo were identified using the qNano multiple analyzer (diameter 59–315 nm) and western blotting with a CD9 antibody. LPS-stimulated cells produced more particles than non-stimulated cells. The presence of the FL or the cleaved form of OPN was confirmed using western blot analysis. A mixture of FL and cleaved OPN was also measured using an ELISA system (Ud-OPN) and their presence in the Exo was confirmed. Ud/FL ratios became low after LPS stimulation, indicating the enhanced encapsulation of FL-OPN in the Exo by LPS. These findings suggest that LPS stimulation of human macrophages facilitates the synthesis of FL-OPN, which is cleaved in cells or the Exo after release. These findings indicate that Exo is a suitable vehicle to transfer OPN to the target cells.     

Phase morphologies and mechanical properties of high‐impact polystyrene (HIPS) and polycarbonate blends compatibilized with polystyrene and polyarylate block copolymer

Phasemorphology and mechanical properties of blends of high‐impact polystyrene (HIPS) and polycarbonate (PC) blends compatibilized with a polystyrene (PS) and polyarylate (PAr) (PS–PAr) block copolymer were investigated. Over a broad range of composition from 50/50 through 30/70, HIPS/PC blends formed cocontinuous structures induced by the flow during the extrusion or injection‐molding processes. These cocontinuous phases had heterogeneity between the parallel and perpendicular directions to the flow. The micromorphology in the parallel direction to the flow consisted of stringlike phases, which were highly elongated along the flow. Their longitudinal size was long enough to be longer than 180 μm, while their lateral size was shorter than 5 μm, whereas that in the perpendicular direction to the flow showed a cocontinuous phase with regular spacing due to interconnection or blanching among the stringlike phases. The PS–PAr block copolymer was found to successfully compatibilize the HIPS/PC blends. The lateral size of the stringlike phases could be controlled both by the amount of the PS–PAr block copolymer added and by the shear rate during the extrusion or injection‐molding process without changing their longitudinal size. The HIPS/PC blend compatibilized with 3 wt % of the PS–PAr block copolymer under an average shear rate of 675 s^?1 showed a stringlike phase whose lateral size was reduced almost equal to the rubber particle size in HIPS. The tensile modulus and yield stress of the HIPS/PC blends could be explained by the addition rule of each component, while the elongation at break was almost equal to that of PC. These mechanical properties of the HIPS/PC blends can be explained by a parallel connection model independent of the HIPS and PC phases. On the other hand, the toughness factor of the HIPS/PC blends strongly depended on the lateral size of the stringlike phases and the rubber particle size in the HIPS. It was found that the size of the string phases and the rubber particle should be smaller than 1.0 μm to attain a reasonable energy absorbency by blending HIPS and PC. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 2347–2360, 2001     

Preferential mineralization of CaCO3 layers on polymer surfaces from CaCl2 and water‐soluble carbonate salt solutions supersaturated by poly(acrylic acid)

CaCO₃ was mineralized from solutions supersaturated only by poly(acrylic acid) (PAA), without bubbling any CO₂ gas in the solution. For example, a layer of CaCO₃ was built up on the surface of a chitosan membrane from a supersaturated aqueous solution containing CaCl₂, Na₂CO₃, and PAA. In this newly developed method, the PAA alone suppresses the precipitation of CaCO₃ from the bulk solution, and therefore, increases the supersaturated concentration. This concentration is estimated to be the same order as that attained in the method in which both CO₂ gas and PAA were used. At the same time, PAA supplies nucleation fields by forming a polymer complex with chitosan. The crystal system obtained was different from those obtained when using CO₂ gas. Self‐organization of aragonite crystallites led to the formation of uniform, concentric, or branching patterns in the surface‐domain structure. These patterns had morphologies similar to those discovered by other researchers, typically in the crystallization of ascorbic acid. Thicker layers of CaCO₃ could be formed on chitosan membranes, the surfaces of which had been converted to a polyelectrolyte complex (PEC) by exposure to PAA solution before the onset of mineralization. Under certain conditions, the CaCO₃ layer had a small spherical curvature, similar to a half‐lens, and generated Newton's ring pattern from the interference fringes of visible light. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91:3627–3634, 2004     

Measurement of internal stresses in coatings using time resolved fluorescence

This paper describes a new nondestructive technique for detecting internal stresses in coatings using time resolved fluorescence. The measurement principle is based upon an experimental result that the decay time of fluorescence from poly(3-octylthiophene), P3OT, dispersed in uniaxially-stretched polymer films decreases with increasing tensile stress acting on the films. Internal stresses in the clear coat and in the base coat of a multilayer structure, which was composed of electrodeposited coat, surface coat, base coat, and clear coat, were estimated from the decay time of fluorescence from P3OT in both coats. The order of internal stresses in the clear coat and base coat of the multilayer system was 1 MPa. When the coatings were piled up, the internal stress decreased as the distance from a metal substrate was increased. It was found that moisture and temperature influenced internal stresses in the clear coat rather than in the base coat. Internal stress in the clear coat, which was one layer coated on a metal substrate, was measured by the traditional bimetallic method or by the time resolved fluorescence technique. Comparing both methods, it was concluded that the time resolved fluorescence technique gave reliable values for internal stresses in coatings.     

Effects of cyclic tensile loading on the rupture behavior of orthogonal 3-D woven SiC fiber/SiC matrix composites at elevated temperatures in air

This study examined the rupture mechanisms of an orthogonal 3D woven SiC fiber/BN interface/SiC matrix composite under combination of constant and cyclic tensile loading at elevated temperature in air. Monotonic tensile testing, constant tensile load testing, and tension–tension fatigue testing were conducted at 1100 °C. A rectangular waveform was used for fatigue testing to assess effects of unloading on the damage and failure behavior. Microscopic observation and single-fiber push-out tests were conducted to reveal the rupture mechanisms. Results show that both oxidative matrix crack propagation attributable to oxidation of the fiber–matrix interface and the decrease in the interfacial shear stress (IFSS) at the fiber–matrix interface significantly affect the lifetime of the SiC/SiC composites. A rupture strength degradation model was proposed using the combination of the oxidative matrix crack growth model and the IFSS degradation model. The prediction roughly agreed with the experimentally obtained results.     

Evaluation of hydrogen absorption properties of Ti–0.2 mass% Pd alloy in fluoride solutions

The hydrogen absorption properties of Ti–0.2 mass% Pd (Ti–0.2Pd) alloy in 2.0% and 0.2% acidulated phosphate fluoride (APF) and neutral 2.0% NaF solutions (25 °C) has been evaluated by hydrogen thermal desorption analysis. During the early stage of immersion (120 h) in the 2.0% APF solution, the amount of absorbed hydrogen was lower than 500 mass ppm. A thermal desorption of hydrogen primary appearing with a peak at 500–600 °C and a broad desorption ranging from 100 to 400 °C were observed. In the 0.2% APF solution, the amount of absorbed hydrogen saturated at 100–200 mass ppm; the thermal desorption of hydrogen appeared with a single peak at 550 °C. In the 2.0% NaF solution, hydrogen absorption was negligible even after 1000 h of immersion, although corrosion pits were observed. The results of the present study suggest that the hydrogen absorption of Ti–0.2Pd alloy, as compared with commercial pure titanium, is suppressed in fluoride solutions.     

Formation of Exclusive Al2O3 Scale on Nb and Nb-Rich Alloys by Two-Step Oxygen–Aluminum Diffusion Process

External Al₂O₃ scale formation behavior by a diffusion aluminizing process on Nb and Nb–X (X?=?Mo, Re, and Ta) alloys with different oxygen solubilities was investigated. The oxygen content in Nb and Nb–X alloys was controlled by oxygen diffusion treatment at 1,100?°C using Nb/NbO mixture. Nb–aluminide, NbAl₃ and Nb₂Al, layers were developed on the low-oxygen Nb substrate by an aluminum diffusion treatment using Al/Al₂O₃/NH₄Cl mixture at 1,100?°C; whereas an adhesive Al₂O₃ scale developed on the Nb substrate with higher oxygen content. The alloy oxygen content decreased by an addition of Ta, Mo and Re, in this order, and the decrease in alloy oxygen content resulted in the transition of Al₂O₃ formation from external scale to internal precipitates. This transition was not observed when low Al activity powder mixture, Ni50Al/Al₂O₃/NH₄Cl, was used for Al diffusion process, and only external Al₂O₃ scale was developed on all samples. In the present study, the effects of oxygen solubility limit, oxygen content, and the activity of Al in diffusion process on the formation of Al₂O₃ scale will be discussed.     

钢表面化学气相沉积TiC晶体的择优取向

本文用化学气相沉积(CVD)法,以TiCl_4-CH_4-H_2为原料气体,在不锈钢表面获得了致密的TiC膜.研究了TiC的成膜速度、表面形貌和晶体择优取向与沉积条什的关系.结果表明,沉积温度T_(dep),碳钛比CH_4/TiCl_4强烈地影响了TiC的成膜速度、表面形貌和晶体择优取向.CH_4/TiCl_4低时,TiC晶体的择优取向为(220):而CH_4/TiCl_4高时,TiC晶体的择优取向为(200).TiC晶体的择优取向主要取决于气氛中活性碳的平衡浓度。     

Synthesis and properties of copolymers from diphenylacetylene having a hexaphenylbenzene moiety

Summary Copolymerization of diphenylacetylene having a hexaphenylbenzene group, 1-[p-(pentaphenyl)phenyl]-2-phenylacetylene (1), with a few other diphenylacetylene derivatives (i.e., diphenylacetylene, 1-phenyl-2-[p-(trimethylsilyl)phenyl] acetylene, 1-phenyl-2-[p-n-octylphenyl]acetylene, (2a–c, respectively) and properties of the formed copolymers were investigated. No polymer was obtained in homopolymerization of 1 with TaCl₅-n-Bu₄Sn catalyst owing to steric hindrance. On the other hand, copolymerization with 2a–c proceeded at various feed ratios to give copolymers in moderate yields. Copoly(1/2a) (feed ratio 25/75) was soluble in toluene and CHCl₃ and its weight-average molecular weight (M _w) was ca. 31×10⁴ and relatively high. Copoly(1/2b) and copoly(1/2c) (both feed ratios 5/95) were soluble in common organic solvents, and had a large M _w up to ca. 1×10⁶. These copolymers were yellow to orange solids. Oxidative cyclodehydrogenation of hexaphenylbenzene groups in copoly(1/2a) was attempted in order to convert them into more conjugated groups. Received: 24 January 2000/Accepted: 17 February 2000