Coherent Optical 25.8-Gb/s OFDM Transmission Over 4160-km SSMF

We discuss coherent optical orthogonal frequency division multiplexing (CO-OFDM) as a suitable modulation technique for long-haul transmission systems. Several design and implementation aspects of a CO-OFDM system are reviewed, but we especially focus on phase noise compensation. As conventional CO-OFDM transmission systems are very sensitive to laser phase noise a novel method to compensate for phase noise is introduced. With the help of this phase noise compensation method we show continuously detectable OFDM transmission at 25.8 Gb/s data rate (20 Gb/s after coding) over 4160-km SSMF without dispersion compensation.     

Rainfall propagation impairments for medium elevation angle satellite‐to‐earth 12 GHz in the tropics

Rain attenuation is the dominant propagation impairment for satellite communication systems operating at frequencies above about 10 GHz. The rainfall path attenuation at 12.255 GHz measured at Universiti Sains Malaysia (USM) for 4 years (2 January to 5 December) is presented. This paper presents an empirical analysis of rain rate and rain attenuation cumulative distribution functions obtained using 1‐min integrated rainfall data and comparison of the measured data with data obtained from well‐established rain model attenuation predictions. Copyright © 2008 John Wiley & Sons, Ltd.     

Bending fatigue strength of case-carburized helical gears with large helix angles up to 40 degrees

Case-carburizing of helical gears with large helix angles may form too large hardened layers near the tooth width end on the acute angle side (ACUTE-END), and adversely affect the bending fatigue strength. We investigated the bending fatigue strength of casecarburized helical gears with large helix angles up to approximately 40° through a bending fatigue test, hardness test, and residual stress measurement. We found that the case-carburizing formed large hardened layers near ACUTE-END, reduced the compressive residual stress near ACUTE-END, and restricted the improvement of the bending fatigue strength in a meshing state where tooth root stress became large near ACUTE-END. Based on the obtained bending fatigue limits, we revealed that ISO 6336-3:2006 overestimated the rate of increase of the permissible circumferential loads for helix angles exceeding approximately 30°, and ISO/DIS 6336-3:2018 underestimated this rate for helix angles near 30°.

     

Structure-Based Design,Synthesis, and Biological Evaluation of Imidazo[4,5-b]Pyridin-2-one-Based p38 MAP Kinase Inhibitors: Part 2

We identified novel potent inhibitors of p38 mitogen-activated protein (MAP) kinase using a structure-based design strategy, beginning with lead compound, 3-(butan-2-yl)-6-(2,4-difluoroanilino)-1,3-dihydro-2H-imidazo[4,5-b]pyridin-2-one ( 1 ). To enhance the inhibitory activity of 1 against production of tumor necrosis factor-α (TNF-α) in human whole blood (hWB) cell assays, we designed and synthesized hybrid compounds in which the imidazo[4,5-b]pyridin-2-one core was successfully linked with the p-methylbenzamide fragment. Among the compounds evaluated, 3-(3-tert-butyl-2-oxo-2,3-dihydro-1H-imidazo[4,5-b]pyridin-6-yl)-4-methyl-N-(1-methyl-1H-pyrazol-3-yl)benzamide ( 25 ) exhibited potent p38 inhibition, superior suppression of TNF-α production in hWB cells, and also significant in vivo efficacy in a rat model of collagen-induced arthritis (CIA). In this paper, we report the discovery of potent, selective, and orally bioavailable imidazo[4,5-b]pyridin-2-one-based p38 MAP kinase inhibitors.     

Detection of Verotoxigenic Escherichia coli O157 and O26 in food by plating methods and LAMP method: a collaborative study

In order to establish a rapid and sensitive method for the detection of Verotoxigenic Escherichia coli O157 and O26, a collaborative study was conducted focusing on a comparison of the efficiency of loop-mediated amplification (LAMP) assay targeting the Verocytotoxin (also called Shiga toxin) gene, utilizing a direct plating method and a plating method with immunomagnetic separation (IMS-plating method) using various agar media. In combination with enrichment with the modified EC supplemented with novobiocin, E. coli O157 was detected in most samples of ground beef and alfalfa sprouts by LAMP assay, the direct plating method and the IMS-plating method. E. coli O26 was detected in approximately 100% of the food samples by LAMP assay. However, the IMS-plating and direct plating methods recovered 80 and 50% in ground beef samples, respectively. As a result, it was demonstrated the LAMP assay is superior to the IMS-plating method. Based on these results, it appears LAMP assay is effective as a screening assay to detect E. coli O157 and O26 from positive samples.     

Physicochemical characteristics of rapidly dried onion powder and its anti-atherogenic effect on rats fed high-fat diet

Rapidly dried onion (Allium cepa L. cv. Momiji No. 3) powder (OP) prepared from the outer layers (from second to fourth scale leaves from the surface) of onion bulbs was analysed for its quercetin and polyuronide contents, the effects of enzymatic treatment and the anti-atherogenic effect on rats fed a high-fat diet. Quercetin 4′-glucoside (50%), free quercetin (30%) and quercetin 3,4′-diglucoside (20%) were identified as quercetin derivatives, and boiling-water extraction was effective in extracting these compounds. OP contained 12.9% of polyuronides, the basic skeleton of pectin. Enzymatic degradation (cellulase and pectinase, 50 °C for 12 h, pH 6.0) of OP was effective in obtaining a slurry of smaller particle sizes. The free quercetin increased and the glucosides decreased with enzyme treatment. In Wistar rats fed an OP-added high-fat diet, the total cholesterol, HDL-cholesterol and triglyceride concentrations were not significantly different from the rats fed a high-fat diet without OP. However, the atherogenic index (AI) of Wistar rats fed an OP-added high-fat diet was lower (AI = 3.3) than rats fed the diet without OP (AI = 4.1). The incremental elastic modulus (IEM) of the aorta from rats fed the OP-added diet was also significantly lower than that of the rats fed the diet without OP. The AI and IEM values of the rats fed the OP-added diet were quite similar to the values of rats fed the diet without OP but were allowed spontaneous exercise. These results suggest that OP intake is effective for decreasing the risk of arteriosclerosis.     

Propagation and termination of an internal crack in continuously cast austenitic stainless steel analyzed by ∑ values and the Schmid factor

The formation mechanism of an internal crack was clarified from the viewpoint of the crystallography and thermal expansion. An inverse pole figure map obtained by EBSD pattern showed that the crack propagated along the grain boundaries having high ∑ values within the columnar zone. After the crack initiation, these positions were considered to undergo cracking followed by propagation toward the equiaxed side. Near the termination position, the grains ahead of crack propagation had a Schmid factor higher than 0.45 consuming elastic strain energy. Thermal expansion measurements showed that the grain with (0 0 1) orientation had the largest expansion while that with (0 1 1) the smallest. The grain boundaries neighboring the combination of (0 0 1) and (0 1 1) grains had the largest thermal stress. Therefore, thermal stress contributed to the initiation of cracking. It was thus proposed to enlarge the equiaxed zone to prevent cracking by discontinuing the crack propagation.     

A short guide to topological terms in the effective theories of condensed matter

This article is meant as a gentle introduction to the topological terms that often play a decisive role in effective theories describing topological quantum effects in condensed matter systems. We first take up several prominent examples, mainly from the area of quantum magnetism and superfluids/superconductors. We then briefly discuss how these ideas are now finding incarnations in the studies of symmetry-protected topological phases, which are in a sense a generalization of the concept of topological insulators to a wider range of materials, including magnets and cold atoms.     

Recovery of residual nutrients from agri-food byproducts using a combination of solid-state fermentation and insect rearing

The present research develops an innovative nutrient recovery strategy for capturing of un-utilised nutrients from agri-food byproducts using a combination of solid state fermentation (SSF) and insect rearing. SSF of borage and flaxseed meals were performed using GRAS organisms to release indigenous nutrients and to produce additional nutrients. Proximate analysis of the SSF-meals showed increases in both lipid and protein contents. Black soldier fly larvae (BSFL) were then grown on these SSF-meals for 12 day. The meals fermented singularly with Lactobacillus plantarum or Aspergillus niger displayed up to 30% enhancement in BSFL biomass, and dual fermentation with L. plantarum and Aspergillus oryzae resulted in an additional 10% enhancement. These examinations showed SFL use over-90% of proteins and lipids in SSF-meals. The results indicate that fermentation of these low-value meals can boost the efficacy of larval growth and the recovery of nutrients from agricultural byproducts as larval biomass.