Conventional and Non-conventional Edible Oils: An Indian Perspective

The Indian dietary pattern has undergone major changes over the past 40 years. Many of these changes involve modification in dietary intake of fats and oils. In developing countries like India, vegetable oils are replacing animal fats because of the cost and health concerns. A wide range of vegetable oils are available in the market but the choice of healthy cooking oil has been a controversial subject since ideas keep on changing as new evidence accumulates. One of the factors holding back the increased use of value-added healthy oils in India is that most potential consumers are genuinely not aware of their health benefits. Edible oil consumption is primarily a community-driven phenomenon in India. The purpose of this paper is to highlight the current scenario of edible oils in India, their composition, health benefits, food applications, stability issues and future aspects as buying the right oil for health has become of great importance.     

Simplified Impedance Model for Adhesively Bonded Piezo-Impedance Transducers

The electromechanical impedance technique employs surface-bonded lead zirconate titanate piezoelectric ceramic patches as impedance transducers for structural health monitoring and nondestructive evaluation. The patches are bonded to the monitored structures using finitely thick adhesive bond layer, which introduces shear lag effect, thus invariably influencing the electromechanical admittance signatures. This paper presents a new simplified impedance model to incorporate shear lag effect into electromechanical admittance formulations, both one-dimensional and two-dimensional. This provides a closed-form analytical solution of the inverse problem, i.e. to derive the true structural impedance from the measured conductance and susceptance signatures, thus an improvement over the existing models. The influence of various parameters (associated with the bond layer) on admittance signatures is investigated using the proposed model and the results compared with existing models. The results show that the new model, which is far simpler than the existing models, models the shear lag phenomenon reasonably well besides providing direct solution of a complex inverse problem.     

Double emulsion‐encapsulated guggul exhibits improved in vivo hypocholesterolaemic action in rats

Guggul tree or Commiphora mukul is a small thorny herb having remarkable hypocholesterolaemic properties. Its therapeutic effects are because of its biocomponent guggulsterones, especially guggulsterone E and Z. In this research, double emulsion‐based spread was tried to improve the bioavailability of the herb guggul in in vivo rat model. The effect of the different diets with encapsulated and nonencapsulated guggul was evaluated and compared after 6 weeks, based on the final body weight and analysis of organs, serum and faeces of normal and hypercholesterolaemic (H) rats. It was evident from the results that double emulsion‐encapsulated guggul showed better control on weight of H rats (25.98% lower), inhibition of HMG CoA reductase (3.95 times less) activity and reduction in atherosclerotic index (47.2%), as compared to diet with unencapsulated guggul. Encapsulation of guggul also improved faecal excretion of bile acids, lipids and total cholesterol in H and normal rats.     

Synthesis and Characterization of Some Triphenyltin(IV) Complexes from Sterically Crowded [((E)-1-{2-Hydroxy-5-[(E)-2-(aryl)-1-diazenyl]phenyl}methylidene)amino]acetate Ligands and Crystal Structure Analysis of a Tetrameric Triphenyltin(IV) Compound

Four new triphenyltin(IV) complexes containing [((E)-1-{2-hydroxy-5-[(E)-2-(aryl)-1-diazenyl]phenyl}methylidene)amino]acetate ligands (L) have been synthesized with formulations of Ph₃SnLH. They have been studied by multinuclear (¹H, ¹³C, ¹¹⁹Sn) NMR, ¹¹⁹Sn M?ssbauer and IR spectroscopy. A full characterization of one complex, Ph₃SnL¹H (1), was accomplished by single crystal X-ray crystallography, which revealed the compound to be a macrocyclic tetramer. In the tetramer, the five coordinate tin atoms have distorted trigonal bipyramidal geometries with the three phenyl groups occupying equatorial positions, while an oxygen atom of the carboxylate group of one L ligand and the oxide O-atom (formerly the hydroxy group) of a second L ligand in an apical positions. The carboxylate ligands bridge adjacent tin atoms and coordinate in the zwitterionic form with the phenolic proton moved to the nearby nitrogen atom. ¹¹⁹Sn NMR results indicate that the tetrameric structures of the complexes in the solid state, in which the tin atoms are five-coordinated, dissociate in solution to yield four coordinate monomeric species.     

Studies on novel heat treated sulfonated poly(ether ether ketone) [SPEEK]/diol membranes for fuel cell applications

The paper describes the preparation of membranes based on sulfonated poly(ether ether ketone) [SPEEK] [degree of sulfonation ∼65%] in the presence of varying amounts of poly (ethylene glycol) (molecular weight 200) [PEG-200] and cyclohexane dimethanol [CDM] using water:ethanol (50:50) as solvent. After drying, the membranes were heat treated at 60 °C (2 h), 80 °C (2 h), 100 °C (2 h), 120 °C (2 h) and 135 °C for 16 h. After the heat treatment, samples were insoluble in water:ethanol (50:50) mixture. The membranes thus obtained were characterized by FTIR spectroscopy (structural), water uptake (hydrolytic stability), thermal stability (TG), mechanical stability and proton conductivity. A significant increase in the hydrolytic stability was observed, SPEEK became elastic and fragile whereas the heat-treated SPEEK/PEG and SPEEK/CDM remained stable even after 135 days of water immersion at 35 °C.     

Structural, dielectric and electrical properties of Pb(SnTi)O3 ferroelectric system

We have synthesized (PST) with x=0.45, 0.55, 0.65 ferroelectric ceramics by a solid-state reaction technique and performed preliminary X-ray diffraction (XRD) analysis and the temperature and frequency dependence dielectric measurements on them. The a.c. and d.c. conductivities have been investigated over a wide range of temperature and the activation energy have also been calculated. It is observed that: (i) the relative dielectric permittivity () and loss tangent (tan ) are dependent on frequency, (ii) the temperature of dielectric permittivity maximum shifts toward lower temperature side, (iii) permittivity maximum decreases with the increase of Sn content in the (PST) compounds and (iv) no frequency dispersion of the dielectric permittivity reveals the no-relaxor behavior of the materials.     

An experimental evaluation of I/O optimizations on different applications

Many large scale applications have significant I/O requirements as well as computational and memory requirements. Unfortunately, the limited number of I/O nodes provided in a typical configuration of the modern message-passing distributed-memory architectures such as Intel Paragon and IBM SP-2 limits the I/O performance of these applications severely. We examine some software optimization techniques and evaluate their effects in five different I/O-intensive codes from both small and large application domains. Our goals in this study are twofold. First, we want to understand the behavior of large-scale data-intensive applications and the impact of I/O subsystems on their performance and vice versa. Second, and more importantly, we strive to determine the solutions for improving the applications' performance by a mix of software techniques. Our results reveal that different applications can benefit from different optimizations. For example, we found that some applications benefit from file layout optimizations whereas others take advantage of collective I/O. A combination of architectural and software solutions is normally needed to obtain good I/O performance. For example, we show that with a limited number of I/O resources, it is possible to obtain good performance by using appropriate software optimizations. We also show that beyond a certain level, imbalance in the architecture results in performance degradation even when using optimized software, thereby indicating the necessity of an increase in I/O resources.     

Thermodynamic performance assessment of an indirect intercooled reheat regenerative gas turbine cycle with inlet air cooling and evaporative aftercooling of the compressor discharge

This study provides a computational analysis to investigate the effects of cycle pressure ratio, turbine inlet temperature (TIT), and ambient relative humidity (φ) on the thermodynamic performance of an indirect intercooled reheat regenerative gas turbine cycle with indirect evaporative cooling of the inlet air and evaporative aftercooling of the compressor discharge. Combined first and second‐law analysis indicates that the exergy destruction in various components of gas turbine cycles is significantly affected by compressor pressure ratio and turbine inlet temperature, and is not at all affected by ambient relative humidity. It also indicates that the maximum exergy is destroyed in the combustion chamber; which represents over 60% of the total exergy destruction in the overall system. The net work output, first‐law efficiency, and the second‐law efficiency of the cycle significantly varies with the change in the pressure ratio, turbine inlet temperature and ambient relative humidity. Results clearly shows that performance evaluation based on first‐law analysis alone is not adequate, and hence more meaningful evaluation must include second‐law analysis. Decision makers should find the methodology contained in this paper useful in the comparison and selection of gas turbine systems. Copyright © 2006 John Wiley & Sons, Ltd.     

Effect of isomerization on thermal behaviour of bisitaconimides

The effect of isomerization of N,N′‐bisitaconimido‐4,4′‐diphenyl ether to the corresponding biscitraconimide on the curing characteristics and thermal stability of cured resins is described. Resins having bisitaconimide:biscitraconimide ratios of 23:77–93:7 were prepared by reacting 4,4′‐diaminodiphenyl ether with itaconic anhydride in solvents of different polarities and under different reaction conditions. Resins containing a higher proportion of citraconimide had a lower melting point (191 vs 208 °C). The curing exotherm was observed immediately after melting in all the resins and exothermic peak temperature reduced with increase in citraconimide content. Resins having a higher proportion of citraconimide on isothermal curing (200 °C, 2 h) and subsequent heating in nitrogen atmosphere degraded at a slightly lower temperature. However, the char yield at 800 °C did not show any systematic dependence on citraconimide content. © 2002 Society of Chemical Industry