Favorable influence of ssDNA-functionalized SWCNT on the navigation pattern of C. elegans

Microsystem Technologies - Single-Walled Carbon Nanotubes (SWCNTs) are widely used as potential carriers in drug delivery systems. The objective of this work was to observe the effects of pristine,...     

Design of an Ultra-Compact and Highly-Sensitive Temperature Sensor Using Photonic Crystal Based Single Micro-Ring Resonator and Cascaded Micro-Ring Resonator

Silicon - In the present report, a photonic crystal based micro-ring resonator (MRR) structure is proposed which is very compact in size and has very fast response and is employed for temperature...     

Recovery and Recycling Silica Flux in Submerged Arc Welding – Acceptable Properties and Economical Correlation

Silicon - This research aims at optimum utilization of waste recycled submerged arc welding slag along with virgin flux in place of pure virgin flux without compromising the quality of welding and...     

Evaluation of wear of turning carbide inserts using neural networks

Recent trends, being towards mostly unmanned automated machining systems and consistent system operations, need reliable on-line monitoring processes. A proper on-line cutting tool condition monitoring system is essential for deciding when to change the tool. Many methods have been attempted in this connection.Recently, artificial neural networks have been tried for this purpose because of its inherent simplicity and reasonably quick data-processing capability. The present work uses the back propagation algorithm for training the neural network of 5-3-1 structure. The technique shows close matching of estimation of average flank wear and directly measured wear value. Thus the system developed demonstrates the possibility of successful tool wear monitoring on-line.     

Study of polyaniline polyacrylamide composites by positron annihilation technique

Polyaniline doped with nonoxidizing Bronsted acids is recognized as a conducting material, as its electrical conductivity changes with percentage of doping. In the present work, different percentages of doped polyaniline were blended with polyacrylamide and their electrical conductivities as well as the positron annihilation lifetimes were measured. Analysis of data yielded three lifetime components. It was observed that the value of the short lifetime component remained constant for doping concentration, whereas that of the intermediate component τ₂ decreased. The relative intensity pertaining to τ₂, however, increased with the increase in doped PANI concentration. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 930–933, 2003     

Al2O3─SiC Composites from Aluminosilicate Precursors

Al₂O₃ and SiC composite materials have been produced from mixtures of aluminosilicates (both natural minerals and synthetic) and carbon as precursor materials. These composites are produced by heating a mixture of kaolinite (or synthetic aluminosilicates) and carbon in stoichiometric proportion above 1550°C, so that only Al₂O₃ and SiC remain as the major phases. A similar process has also been used for synthesizing other composite powders having mixtures of Al₂O₃, SiC, TiC, and ZrO₂ in different proportions (all compounds together or selective mixtures of some of them), as desired. The microstructure of hot-pressed dense compacts, produced from these powders, revealed that the SiC phase is distributed very homogeneously, even occasionally within Al₂O₃ grains on a nanosize scale. The homogeneous distribution of SiC particles within the system produced high fracture toughness of the hot-pressed material (K_IC∼ 7.0 MPa · m^1/2) and having Vicker's hardness values greater than 2000 kgf/mm².     

Aspects of poly(p-phenylene sulfide) degradation and stabilization. Part 1. Influence of polymer end groups on exposure induced coloration

In this paper we reviewed some of our work on the photo induced coloration of Poly(p-phenylene sulfide) (PPS) and compared it to recent results obtained from the thermal treatment of resins that varied in molecular weight and ionic content. The results from this study suggest that coloration of amorphous PPS films after UV irradiation is caused by products different from those that cause coloration in semicrystalline PPS after thermoxidation. In addition, we found that polymer end group chemistry and resin molecular weights play important roles in the thermoxidative coloration of PPS, but only nominally influence the photooxidative coloration of the resin. PPS coloration may arise from the accumulation of specific, colored products (e.g., phenyl-phenyl moieties) and the possible presence of intermolecular aggregates. The mechanism and extent by which these structures occur in UV irradiated or heated PPS are likely dependent upon the polymer morphology of the samples tested.     

Victim retention for reducing cache misses in tiled chip multiprocessors

This paper presents CMP-VR (Chip-Multiprocessor with Victim Retention), an approach to improve cache performance by reducing the number of off-chip memory accesses. The objective of this approach is to retain the chosen victim cache blocks on the chip for the longest possible time. It may be possible that some sets of the CMPs last level cache (LLC) are heavily used, while certain others are not. In CMP-VR, some number of ways from every set are used as reserved storage. It allows a victim block from a heavily used set to be stored into the reserve space of another set. In this way the load of heavily used sets are distributed among the underused sets. This logically increases the associativity of the heavily used sets without increasing the actual associativity and size of the cache. Experimental evaluation using full-system simulation shows that CMP-VR has less off-chip miss-rate as compared to baseline Tiled CMP. Results are presented for different cache sizes and associativity for CMP-VR and baseline configuration. The best improvements obtained are 45.5% and 14% in terms of miss rate and cycles per instruction (CPI) respectively for a 4 MB, 4-way set associative LLC. Reduction in CPI and miss rate together guarantees performance improvement.