PZT-Polymer 1-3 Composite for High Resolution Ultrasonic Imaging

A novel process has been developed to construct PZT-polymer 1-3 micro composites for high-resolution ultrasonic imaging for medical diagnosis. The key technology is the lost silicon (Si) mold process, by which PZT micro-rod arrays have been successfully fabricated with the finest rod size being 7 μm, the highest aspect ratio exceeding 15. Such fine-scale high-aspect-ratio PZT structures, which are essential for realizing high imaging performance, have never been realized by any conventional technique.     

Osteoinduction by Functionally Graded Apatites of Bovine Origin Loaded with Bone Morphogenetic Protein-2

Bioresorbable and functionally graded apatites (fg-HAp) ceramics, which are characterized by gradations in crystallinity and the grain size of hydroxyapatite (HAp:Ca₁₀(PO₄)₆(OH)₂), were designed using bovine bone by the calcination and partial dissolution–precipitation method. The fg-HAp ceramics had macropores of 100–600 μm originated from spongy bone, and micropores of 10–160 nm. Fg-HAp ceramics loaded with recombinant human bone morphogenetic protein-2 (rhBMP-2/fg-HAp) were implanted into the subcutaneous tissue of rats. Eight weeks after the implantation, the surface and bulk degradations of the fg-HAp-containing body fluid occured, and small pieces of fg-HAp were incorporated into the induced bone and fatty marrow, suggesting that osteoinduction occurred in conjunction with bone remodeling. The rhBMP-2/fg-HAp ceramics developed could become a resorbable biomimetic material with fast bioresorption and osteoinduction characteristics.     

The pharmacokinetics of water-in-oil-in-water-type multiple emulsion of a new tacrolimus formulation

We developed a water-in-oil-in-water (W/O/W)-type multiple emulsion of a new tacrolimus formulation. A potential approach to avoid the complications of systemic immunosuppression and simultaneously enhance immunosuppressive efficacy is to deliver immunosuppressive agents locally to the site of the target organs. The W/O/W emulsion is dispersed oil drops containing smaller water droplets that allow the delivery of drugs preferentially to the reticuloendothelial system (RES). Since the liver and the spleen are primary components of the RES, and the brain and the kidney have a poor RES, we hypothesized that a W/O/W emulsion of tacrolimus would prossess the pharmacokinetic benefits of local immunosuppression. We evaluated this hypothesis in a rat model. The tacrolimus levels of whole blood, the liver, spleen, brain, and kidney in rats given intravenous emulsions of tacrolimus (W/O/W group) were compared with a group administered tacrolimus alone (T group). There were no significant differences between the pharmacokinetic parameters of W/O/W group and T group based on whole blood data. However, the W/O/W group had significantly decreased tacrolimus levels in the brain and kidney, and significantly increased levels in the liver and spleen compared with the T group. These data suggest that the W/O/W emulsion is applicable as an intravenous drug carrier for local immunosuppression.     

Thermal and electrical properties of perovskite-type strontium molybdate

Polycrystalline samples of perovskite-type strontium molybdate, SrMoO₃, have been prepared and the thermal and electrical properties have been measured from room temperature to about 1000 K. The electrical resistivity is of an order of magnitude of 10⁻⁵ to 10⁻⁶ (Ω m) in the whole temperature range. The Seebeck coefficient is around 4–9 μV K⁻¹. At room temperature, the thermal conductivity is about 30 W m⁻¹ K⁻¹, and it decreases with increasing temperature.     

Deep Reactive Ion Etching of Lead Zirconate Titanate Using Sulfur Hexafluoride Gas

A deep reactive ion etching (RIE) technique that uses sulfur hexafluoride (SF₆) gas has been developed for lead zirconate titanate (Pb(Zr,Ti)O₃, PZT) three-dimensional microfabrication from PZT ceramic blocks. The etching was performed by using an inductively coupled plasma that was generated in a narrow-gap vacuum chamber. The etch depth was 70 µm with a maximum etch rate of 0.3 µm/min and a selectivity of PZT to the electroplated nickel mask of >35:1. The sidewalls of the PZT structures were tapered, with base angles of ∼75°. Both positive RIE lag and unexpected ultrafine-slit etching phenomena were observed.     

GaN-based optoelectronic devices on sapphire and Si substrates

A recessed gate AlGaN/GaN high-electron mobility transistor (HEMT) on sapphire (0 0 0 1), a GaN metal-semiconductor field-effect transistor (MESFET) and an InGaN multiple-quantum well green light-emitting diode (LED) on Si (1 1 1) substrates have been grown by metalorganic chemical vapor deposition. The AlGaN/GaN intermediate layers have been used for the growth of GaN MESFET and LED on Si substrates. A two-dimensional electron gas mobility as high as 9260 cm²/V s with a sheet carrier density of 4.8×10¹² cm⁻² was measured at 4.6 K for the AlGaN/GaN heterostructure on the sapphire substrate. The recessed gate device on sapphire showed a maximum extrinsic transconductance of 146 mS/mm and a drain–source current of 900 mA/mm for the AlGaN/GaN HEMT with a gate length of 2.1 μm at 25°C. The GaN MESFET on Si showed a maximum extrinsic transconductance of 25 mS/mm and a drain–source current of 169 mA/mm with a complete pinch-off for the 2.5-μm-gate length. The LED on Si exhibited an operating voltage of 18 V, a series resistance of 300 Ω, an optical output power of 10 μW and a peak emission wavelength of 505 nm with a full-width at half-maximum of 33 nm at 20 mA drive current.     

Inverse scattering method for one-dimensional inhomogeneous layered media

An inverse scattering method to reconstruct simultaneously the permittivity profile and the conductivity profile of one-dimensional inhomogeneons medium which makes use of the transverse electric (TE) wave and/or transverse magnetic (TM) wave, is proposed. The medium is illuminated by the TE and/or TM plane wave at oblique incidence, and the data are taken as the reflection coefficients for a set of discrete frequencies and/or a finite number of incident angles. Furthermore, the reflection coefficient data contain the Gaussian noise. The nonlinear integral equation relating the unknown constitutive parameter of the medium to the reflection coefficient for TE wave and/or TM wave is solved by the Newton iteration method. The inverse operator in the Newton method is determined by the regularization method. It is demonstrated in terms of the numerical examples that this method utilizing both polarizations and the incident angle of the incident plane wave is very effective even if the reflection coefficient contains the practical measurement error, or the phase of the reflection coefficient is unknown. Moreover, the relationships between the errors of reconstructed profile and the measured reflection coefficient are also discussed.     

日本污水处理构筑物钢筋混凝土结构的腐蚀及防护

针对污水处理系统中的混凝土构筑物受到的各种腐蚀介质的侵蚀问题,从腐蚀的机理、对策、抑制技术,防腐技术、工法等方面,介绍日本在此领域的技术、经验及做法。     

Incorporating a Polyethyleneglycol Linker to Enhance the Hydrophilicity of Mitochondria-Targeted Triphenylphosphonium Constructs

The targeting of bioactive molecules and probes to mitochondria can be achieved by coupling to the lipophilic triphenyl phosphonium (TPP) cation, which accumulates several hundred-fold within mitochondria in response to the mitochondrial membrane potential (Δψ_m). Typically, a simple alkane links the TPP to its “cargo”, increasing overall hydrophobicity. As it would be beneficial to enhance the water solubility of mitochondria-targeted compounds we explored the effects of replacing the alkyl linker with a polyethylene glycol (PEG). We found that the use of PEG led to compounds that were readily taken up by isolated mitochondria and by mitochondria inside cells. Within mitochondria the PEG linker greatly decreased adsorption of the TPP constructs to the matrix-facing face of the mitochondrial inner membrane. These findings will allow the distribution of mitochondria-targeted TPP compounds within mitochondria to be fine-tuned.