Hydraulic reactivity and cement formation of baghdadite

In this study, the hydraulic reactivity and cement formation of baghdadite (Ca₃ZrSi₂O₉) was investigated. The material was synthesized by sintering a mixture of CaCO₃, SiO₂, and ZrO₂ and then mechanically activated using a planetary mill. This leads to a decrease in particle and crystallite size and a partial amorphization of baghdadite as shown by X-ray powder diffraction (XRD) and laser diffraction measurements. Baghdadite cements were formed by the addition of water at a powder to liquid ratio of 2.0 g/ml. Maximum compressive strengths were found to be ~2 MPa after 3-day setting for a 24-h ground material. Inductively coupled plasma mass spectrometry (ICP-MS) measurements showed an incongruent dissolution profile of set cements with a preferred dissolution of calcium and only marginal release of zirconium ions. Cement formation occurs under alkaline conditions, whereas the unground raw powder leads to a pH of 11.9 during setting, while prolonged grinding increased pH values to approximately 12.3.     

Facile Fabrication of Ultrafine Copper Nanoparticles in Organic Solvent

A facile chemical reduction method has been developed to fabricate ultrafine copper nanoparticles whose sizes can be controlled down to ca. 1 nm by using poly(N-vinylpyrrolidone) (PVP) as the stabilizer and sodium borohyrdride as the reducing agent in an alkaline ethylene glycol (EG) solvent. Transmission electron microscopy (TEM) results and UV–vis absorption spectra demonstrated that the as-prepared particles were well monodispersed, mostly composed of pure metallic Cu nanocrystals and extremely stable over extended period of simply sealed storage.     

Optima localization by vehicle formations imitating the Nelder-Mead simplex algorithm

In this paper, we address the problem of localizing extrema points and iso-contours of ambient environmental fields (specifically, ocean bottom landscape and underwater plumes) using a networked formation of autonomous underwater vehicles. We propose the use of the Nelder-Mead extension to the basic simplex nonlinear optimization algorithm. In these robust gradient-free strategies, decisions are solely made based on field values measured by the individual vehicles, while measurements are fused and actions decided according to the algorithm. A main goal of this paper is to trigger interest in direct search methods as pertains to this type of robotic problem.     

Guest Editor's Introduction: Capturing Design Knowledge

Capturing software design knowledge is important because it tends to evaporate as software systems evolve. This has severe consequences for many software projects. To counteract this phenomenon, effective, systematic documentation of design knowledge is important. However, many proposed approaches for capturing design knowledge are still experimental or in an early-adoption stage. In this article, we discuss existing and new approaches to deal with parts of the knowledge evaporation problem.     

The Autosar XML Schema and Its Relevance for Autosar Tools

The Autosar standard represents an emerging approach to unifying virtually all aspects of the development workflow of automotive embedded software. The standard features an XML schema used as a basis for interchanging documents containing Autosar model content. Although the schema is primarily for document exchange, it could also be the basis for creating a metamodel. However, a tool metamodel should probably be designed differently.     

Zutrittskontrolle mit Gesichtserkennung

Firmen&ProdukteDehn Austria

überspannungs-schutz in der Telekommunikation     

Biosynthesis of novel thermoplastic polythioesters by engineered Escherichia coli

The development of non-petrochemical sources for the plastics industry continues to progress as large multinationals focus on renewable resources to replace fossil carbon. Many bacteria are known to accumulate polyoxoesters as water-insoluble granules in the cytoplasm. The thermoplastic and/or elastomeric behaviour of these biodegradable polymers holds promise for the development of various technological applications. Here, we report the synthesis and characterization of microbial polythioesters (PTEs), a novel class of biopolymers of general technological relevance. Biosynthesis of PTE homopolymers was achieved using a recombinant strain of Escherichia coli that expressed a non-natural pathway consisting of a butyrate kinase, a phosphotransbutyrylase, and a PHA synthase. Different homopolymers were produced, consisting of either 3-mercaptopropionate, 3-mercaptobutyrate, or 3-mercaptovalerate repeating units, if the respective mercaptoalkanoic acids were provided as precursor substrates to the fermentative process. The PTEs contributed up to 30% (w/w) of the cellular dry weight and were identified as hydrophobic inclusions in the cytoplasm. The chemical and stereochemical homogeneity of the purified PTEs were identified by different methods, and the estimated physical properties were compared to the oxypolyester equivalents, revealing low crystalline order and, for the poly(3-mercaptopropionate) improved thermal stability. The ability to produce PTEs through a biosynthetic route opens up new avenues in the field of biomaterials.     

4-Nitro-7-piperazino-2,1,3-benzoxadiazole as a reagent for monitoring of airborne isocyanates by liquid chromatography

4-Nitro-7-piperazino-2,1,3-benzoxadiazole (NBDPZ) is presented as a new reagent for the determination of mono- and diisocyanates in air samples. NBDPZ readily reacts with the airborne analytes, thus yielding the corresponding urea derivatives, which are subsequently separated by means of reversed-phase liquid chromatography. On a phenyl-modified stationary phase, excellent baseline separation for numerous mono- and diisocyanate derivatives is obtained. Both diode array and fluorescence detection are performed with limits of detection of 11-35 and 5-9 nmol/L for the individual derivatives, respectively. In contrast to established derivatizing agents for the analysis of isocyanates, NBDPZ provides for increased selectivity due to the favorable detection wavelengths in the visible range (UV/visible, absorption maximums approximately 480 nm; fluorescence, excitation maximums approximately 470 nm, emission maximums approximately 535 nm). In addition, the high molar absorptivities of the reagent and the derivatives provide excellent sensitivity that is superior to most literature-known methods. Finally, air sampling methods comprising both the use of impingers and test tubes are developed and successfully applied to the determination of isocyanates in gaseous samples. Excellent recovery reaching values of >90% is observed for each of the two techniques investigated.