Salt diffusion in a temperature field: Application to salinity profiles in solar ponds

In the present investigation, the process of diffusion of salt in a vertical column of liquid, subjected to temperature variations of the types T(x) = constant, linear ( = a + bx) and parabolic ( = a + bx - cx²); with a constant concentration difference between the top and the bottom (0 and 25 per cent, respectively) is studied. It is seen that a linear temperature gradient, T(x) = a + bx, leads to a near convex parabolic salt concentration profile with maximum deviations increasing from 13.5 per cent (at 40°C) to 14.8 per cent (at 70°C) and eventually to 15.7 per cent (at 90°C) with respect to the linear concentration value of 12.5 per cent (by weight) at the midpoint. Conversely, the parabolic temperature profile as well as the modified profile due to the Soret effect leads to near cubic salt profiles which differ only by 2–3 per cent in the upper half of the pond. However, they show a point of inflexion at larger depths near the bottom around which the convex profiles change over and become concave. Subsequently, these studies have been extended to compute the salinity profiles of thermal configurations of the operational solar pond.     

Kinetics of diffusion of salt in solar ponds

In the present communication, the kinetics of diffusion of salt in a stacked layer solar pond has been investigated by using the step function for the initial state of salt distribution and a closed form solution for the salt concentration has been obtained with the boundary conditions of an operational solar pond. It has been predicted that the time required for a two layered solar pond with non-convective zone of about 1 m depth to reach equilibrium concentration gradient is about 585 days, whereas that required for a ten layered pond is only 96 days.     

Dynamic User Preference Based Network Selection for Vertical Handoff in Heterogeneous Wireless Networks

Wireless Personal Communications - In Heterogeneous Wireless Networks (HWN), seamless Vertical Handoff (VHO) to the best available network is significant in providing Quality of Experience to the...     

Self-assembly hydrothermal assisted synthesis of mesoporous anatase in the presence of ethylene glycol

Mesoporous nanocrystalline anatase was prepared hydrothermally employing P123 as structure-directing agent. Ethylene glycol was used as a key synthesis parameter to fine tune the morphology, crystal size and pore size of the resultant mesophases. The incorporation of EG in the synthesis gel resulted in the formation of 1–2 μm sphere-like shapes and led to an increase in the specific surface area from 95 to 170 m²/g, decrease in the average pore size from 11 to 4.8 nm, and decrease in the average crystallite size from 17 to 12 nm. These mesophases were used as photocatalysts for the UV degradation of methylene blue and methyl orange. The mesoporous anatase phases photodegraded MB 1.5–3× faster than commercially available P25 and showed limited photocatalytic behavior for methyl orange.     

Liquid and gas flows in microchannels of varying cross section: a comparative analysis of the flow dynamics and design perspectives

This paper presents a comparative study of the flow of liquid and gases in microchannels of converging and diverging cross sections. Towards this, the static pressure across the microchannels is measured for different flow rates of the two fluids. The study includes both experimental and numerical investigations, thus providing several useful insights into the local information of flow parameters as well. Three different microchannels of varying angles of convergence/divergence (4°, 8° and 12°) are studied to understand the effect of the angle on flow properties such as pressure drop, Poiseuille number and diodicity. A comparison of the forces involved in liquid and gas flows shows their relative significance and effect on the flow structure. A diodic effect corresponds to a difference in the flow resistance in a microchannel of varying cross section, when the flow is subjected alternatively to converging and diverging orientations. In the present experiments, the diodic effect is observed for both liquid and gas as working fluids. The effect of governing parameters—Reynolds number and Knudsen number, on the diodicity is analysed. Based on these results, a comparison of design perspectives that may be useful in the design of converging/diverging microchannels for liquid and gas flows is provided.     

Laminin Receptor-Avid Nanotherapeutic EGCg-AuNPs as a Potential Alternative Therapeutic Approach to Prevent Restenosis

In our efforts to develop new approaches to treat and prevent human vascular diseases, we report herein our results on the proliferation and migration of human smooth muscles cells (SMCs) and endothelial cells (ECs) using epigallocatechin-3-gallate conjugated gold nanoparticles (EGCg-AuNPs) as possible alternatives to drug coated stents. Detailed in vitro stability studies of EGCg-AuNPs in various biological fluids, affinity and selectivity towards SMCs and ECs have been investigated. The EGCg-AuNPs showed selective inhibitory efficacy toward the migration of SMCs. However, the endothelial cells remained unaffected under similar experimental conditions. The cellular internalization studies have indicated that EGCg-AuNPs internalize into the SMCs and ECs within short periods of time through laminin receptor mediated endocytosis mode. Favorable toxicity profiles and selective affinity toward SMCs and ECs suggest that EGCg-AuNPs may provide attractive alternatives to drug coated stents and therefore offer new therapeutic approaches in treating cardiovascular diseases.     

Effect of combination and number of b values in IVIM analysis with post-processing methodology: simulation and clinical study

Magnetic Resonance Materials in Physics, Biology and Medicine - To investigate the effect of number and combination of b values used on the accuracy of estimated Intravoxel Incoherent Motion (IVIM)...     

Studies on mechanical and wear properties of alloyed hypereutectic gray cast irons in the as-cast pearlitic and austempered conditions

The mechanical and wear behavior of a series of as-cast gray iron alloys were compared with properties obtained after austempering at 360 °C. The austempered alloys showed equivalent or moderately enhanced mechanical strength than the as-cast pearlitic gray irons. The specific wear rates of all the austempered alloys decreased significantly by 7–15 times and friction coefficient reduced by 30–50% compared to pearlitic alloyed gray irons. The dry sliding wear studies of as-cast alloys against high carbon 1%Cr through-thickness hardened steel shows that the specific wear rate ranged from 5.6 to 19.1 (×10⁻⁷) g/Nm with friction coefficient from 0.55 to 0.7. While, the austempered alloys showed wear rates from 0.5 to 2.6 (×10⁻⁷) g/Nm with friction coefficient ranging from 0.23 to 0.4. The improved wear resistance was attributed to the layer wise surface phase transformation associated with strain induced martensite formation of the stabilized austenite in the austempered matrix, lubrication of the interface by the flake graphite and better heat conduction from the rubbing interface by higher volume fraction of the graphite. Cast iron alloyed with Ni shows enhanced mechanical properties and wear resistance. The tensile strength shows decreasing trend with increase in carbon equivalent and graphite volume. The specific wear rate and friction coefficient shows decreasing trend with increase in hardness and graphite flake volume.     

Undrained Response of Clays to Varying Strain Rate

The undrained stress–deformation behavior of clays is significantly affected by the loading rate. Based on the observed experimental response, it is possible to model the strain rate response of clays as an apparent overconsolidated clay response. In this work, we have quantitatively determined the change in the overconsolidation ratio (OCR) due to a change in the strain rate. Our results show that the shear strength response and the excess pore water pressure response at the peak stress provide quantitatively similar magnitudes of change in the OCR with increasing strain rate. This finding holds true for both normally and overconsolidated clays. This suggests that the relationship between strain rate and change in the OCR can be considered as an inherent material characteristic and is quantifiable. A relationship between the change in the OCR and change in the strain rate is described.     

Combining Intelligent Techniques for Sensor Fusion

Mobile robots rely on sensor data to build a representation of their environment. However, sensors usually provide incomplete, inconsistent or inaccurate information. Sensor fusion has been successfully employed to enhance the accuracy of sensor measures. This work proposes and investigates the use of Artificial Intelligence techniques for sensor fusion. Its main goal is to improve the accuracy and reliability of the distance measure between a robot and an object in its work environment, based on measures obtained from different sensors. Several Machine Learning algorithms are investigated to fuse the sensors data. The best model generated by each algorithm is called estimator. It is shown that the employment of estimators based on Artificial Intelligence can improve significantly the performance achieved by each sensor alone. The Machine Learning algorithms employed have different characteristics, causing the estimators to have different behaviors in different situations. Aiming to achieve an even more accurate and reliable behavior, the estimators are combined in committees. The results obtained suggest that this combination can further improve the reliability and accuracy of the distances measured by the individual sensors and estimators used for sensor fusion.