Hyperbranched polyglycerols,obtained from environmentally benign monomer,as reactive clays inhibitors for water‐based drilling fluids

To prevent the degradation of the borehole and also the disintegration and dispersion of drilled cuttings, different shale stabilizing additives are used in water‐based drilling fluids (WBFs). Glycols, poly(ethylene glycol), glycerols, and polyglycerol derivatives, also called polyols, have been used to inhibit shales containing reactive clays in WBF. These additives are normally used in conjunction with KCl to reduce clay swelling and dispersion of drilled cuttings. Highly branched polymers have become an important field in current polymer science. Such materials typically exhibit compact, globular structures in combination with an exceptionally high number of sites with functional groups. They have unique properties that differ significantly from their linear counterparts, and the hyperbranched polyglycerol (hPG) is an important hyperbranched polymer that can be produced from an environmentally benign monomer, the glycerol carbonate. In this article, the clay inhibitive properties of hPG were evaluated by different test methods including bentonite inhibition test, cuttings recovery, and X‐ray diffraction measurements. The results show that the hPG has a great potential to be used as an environmental friendly inhibitor additive in WBFs. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40384.     

Removal of dichloromethane from waste gases in one- and two-liquid-phase stirred tank bioreactors and biotrickling filters

The removal of dichloromethane (DCM) from polluted air was studied both in biotrickling filters and in continuous stirred tank bioreactors, using either a single-liquid aqueous phase or a combination of an aqueous-organic liquid phase. The presence of the organic phase, i.e. silicone oil, at a volume ratio of 10% of the liquid phase, increased the maximum EC by about 25% in the BTF, reaching 200 g m³/h, and by as much as 300% in the CSTB, reaching 350 g m³/h. Based on data of chloride release in the aqueous phase and carbon dioxide production in the gas phase, complete dechlorination and mineralization of the pollutant could be confirmed. When applying shock loads, a more stable behaviour was observed in the presence of the organic phase. Generally, the completely mixed reactors were also more stable than the plug-flow biotrickling filters, irrespective of the presence of the organic phase. The use of molecular techniques allowed showing that the originally inoculated DCM-degrading Hyphomicrobium strains remained present, although not dominant, after long-term bioreactor operation. Different new bacterial populations did also appear in the systems, some of which were unable to degrade DCM.     

A note on the properties of power-transformed returns in long-memory stochastic volatility models with leverage effect

The autocorrelation function (acf) of powered absolute returns and their cross-correlations with original returns are derived, for any value of the power parameter, in the context of long-memory stochastic volatility models with leverage effect and Gaussian noises. These autocorrelations and cross-correlations generalize and correct recent results on the acf of squared and absolute returns.     

Hot-erosion of nano-bonded refractory castables for petrochemical industries

Cold-erosion tests are usually applied for refractory castable evaluation in petrochemical industries, mainly for materials used in cyclones and risers of fluidized catalytic cracking units (FCCU). Due to the fact that in the operation, the refractory material is subjected to high temperature, at first, hot-erosion tests could be more representative. Erosion wear has a great influence on the FCCU refractory working life and the lost income associated with a production halt can reach values close to US$500,000 per day. These aspects are strong enough to justify hot-erosion resistance characterization. The test viability, which could result in selecting better material for the application, was evaluated using commercial products and nano-bonded castables from 200 up to 815 °C. At this temperature range, a significant difference between the cold and hot-erosion loss was not observed. Therefore, it indicates that the cold-erosion test is suitable and sufficient for selecting refractory castables for FCCU applications. The cold-erosion test also presented a higher data correlation with the splitting tensile strength and the hot modulus of rupture. Regarding the different evaluated materials, the nano-bonded castables showed a higher erosion resistance and were less susceptible to the temperature effect than the calcium aluminate cement bonded commercial products.     

On the asymptotic behaviour of shells of revolution in free vibration

We consider the free vibration problem of thin shells of revolution of constant type of geometry, focusing on the asymptotic behaviour of the lowest eigenfrequency, as the thickness tends to zero. Numerical experiments are computed using two discretization methods, collocation and finite elements, each corresponding to a different shell model. Our results are in agreement with theoretical results obtained using interpolation theory and cited in literature.     

Colour assays: An inside look into Alentejo traditional limewash paintings and coloured lime mortars

A series of colour assays were conducted taking into account old bibliographic recommendations and oral testimony regarding traditional lime painting technology from the Alentejo (South Portugal) region. The main objectives were: (a) the colorimetric analysis of paintings made with different limewash preparation methods; (b) the comparison between natural processed red and yellows ochre pigments (“home made” and from industrial origin) and synthetic iron oxides in different concentrations and lime proportions; (c) the evaluation of the colorimetric CIELAB coordinates during the lime carbonation process in coloured mortars and limewashes. The results shows that the evolution of L*, a*, and b* during the carbonation process is independent of pigment concentration and paint thickness but dependent of pigment composition and finishing technique (lime painting or coloured mortar). They also emphasize the importance of surface appearance attributes and its influence on the colorimetric parameters. © 2010 Wiley Periodicals, Inc. Col Res Appl, 36, 61–71, 2011     

Identification of tool parallel axis offset through the analysis of the topography of surfaces machined by peripheral milling

A method for the identification of the tool parallel axis offset (TPAO) that occurs when the end mill is held in the spindle is developed. The method is based on the analysis of the topography of surfaces machined by peripheral milling and considers the cutter grinding errors. As known from the literature, TPAO causes each cutting edge to be at a different radius from the spindle axis and creates transition bands in the topography of milled surfaces, in which roughness grooves generated by different teeth blend together. In this paper, the TPAO, defined by the distance of the tool axis from the spindle axis and by an angle relating the offset direction to the position of cutting edges, is expressed as a function of the width of the roughness grooves at any height of the transition bands. This expression allows the TPAO to be estimated by measuring the groove widths at only two heights and solving a system of two linear equations. In order to obtain the groove widths, a procedure based on digital image processing is developed. Through this procedure, the groove widths are estimated at more than the two necessary heights without high computational cost. This leads to the resolution of an overdetermined system of linear equations that allows the TPAO to be identified with more accuracy. Finally in order to verify the predictions of the proposed method, a series of cutting tests were carried out. A reasonable agreement between the experimental results and the predicted ones was found.     

RILEM recommendation MDT. D.3—Determination “in situ” of the adhesive strength of rendering and plastering mortars to their substrate

RILEM RecommendationsRILEM TC 177-MDT: ‘Masonry Durability and on-site Testing’

RILEM recommendation MDT. D.3—Determination “in situ” of the adhesive strength of rendering and plastering mortars to their substrate