Simulation of vacuum distillation to produce alcohol-free beer

Several processes have been developed for producing alcohol-free beer while maintaining desirable sensory characteristics. One of the most popular thermal processes used is distillation, where not only ethanol but volatile aromatic components are partly or completely removed from the beer. Based on data from the literature and using the Aspen Plus simulator, this study evaluates and compares the aroma profiles of alcohol-free beers obtained by continuous vacuum distillation with different pressures and processes. Three processes were simulated at pressures of 60, 102, and 200 mbar. The first (Process A) was a standard continuous vacuum distillation, where the bottom product was an alcohol-free beer. In the second (Process B), the bottom product was blended with a standard beer that had not undergone any thermal process. In the third (Process C), part of the top stream was mixed with the bottom product. This study considered eight major compounds in beer: ethanol, propanol, isobutanol, 2-methyl-1-butanol, 3-methyl-1-butanol, ethyl acetate, diacetyl and isoamyl acetate. The three simulated pressure ranges showed similar results, indicating that reducing the pressure below 200 mbar did not improve separation. Further, vacuum distillation did not remove diacetyl from the beer. Processes B and C resulted in beer that was richer in flavour compounds. Furthermore, when these processes were compared to Process A, the concentration of esters was markedly higher. © 2019 The Institute of Brewing & Distilling     

Single and mixed poloxamine micelles as nanocarriers for solubilization and sustained release of ethoxzolamide for topical glaucoma therapy

Polymeric micelles of single and mixed poloxamines (Tetronic) were evaluated regarding their ability to host the antiglaucoma agent ethoxzolamide (ETOX) for topical ocular application. Three highly hydrophilic varieties of poloxamine (T908, T1107 and T1307) and a medium hydrophilic variety (T904), possessing a similar number of propylene oxide units but different contents in ethylene oxide, were chosen for the study. The critical micellar concentration and the cloud point of mixed micelles in 0.9 per cent NaCl were slightly greater than the values predicted from the additive rule, suggesting that the co-micellization is hindered. Micellar size ranged between 17 and 120 nm and it was not altered after the loading of ETOX (2.7–11.5 mg drug g^–1 poloxamine). Drug solubilization ability ranked in the order: T904 (50-fold increase in the apparent solubility) > T1107 ≅ T1307 > T908. Mixed micelles showed an intermediate capability to host ETOX but a greater physical stability, maintaining almost 100 per cent drug solubilized after 28 days. Furthermore, the different structural features of poloxamines and their combination in mixed micelles enabled the tuning of drug release profiles, sustaining the release in the 1–5 days range. These findings together with promising hen''s egg test-chorioallantoic membrane biocompatibility tests make poloxamine micelles promising nanocarriers for carbonic anhydrase inhibitors in the treatment of glaucoma.     

Non-culture-based identification of mastitis-causing bacteria by MALDI-TOF mass spectrometry

The purpose of this study was to evaluate the detection limit of matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) for direct identification, without previous microbiological culture, of bovine mastitis-causing bacteria from milk samples. Milk samples (n = 15) were experimentally contaminated with Staphylococcus aureus, Streptococcus uberis, Streptococcus agalactiae, Streptococcus dysgalactiae, and Escherichia coli to have bacterial counts ranging from 10³ to 10⁹ cfu/mL. These contaminated milk samples were subjected to a preparation protocol for bacterial ribosomal protein extraction using the MALDI Sepsityper kit (Bruker Daltonik, Bremen, Germany), which allowed MALDI-TOF MS coupled with Biotyper software (Bruker Daltonik) to identify bacterial fingerprints based on intact ribosomal proteins. The ability of MALDI-TOF MS to correctly identify bacterial strains from experimentally contaminated milk (without previous microbiological culture) depended on the bacterial count of the samples and on the species of the bacteria evaluated. Adequate identification at the bacterial species level (score ≥2.0) directly from milk samples required bacterial counts in the following ranges: ≥10⁶ cfu/mL of Staph. aureus, ≥10⁷ cfu/mL of E. coli, and ≥10⁸ cfu/mL of Strep. agalactiae, Strep. dysgalactiae, and Strep. uberis. We concluded that direct identification of mastitis-causing pathogens is possible for Staph. aureus, E. coli, Strep. agalactiae, Strep. dysgalactiae, and Strep. uberis, but correct identification depended on the bacterial count in the milk samples.     

In Silico Study,Physicochemical, and In Vitro Lipase Inhibitory Activity of α,β-Amyrenone Inclusion Complexes with Cyclodextrins

α,β-amyrenone (ABAME) is a triterpene derivative with many biological activities; however, its potential pharmacological use is hindered by its low solubility in water. In this context, the present work aimed to develop inclusion complexes (ICs) of ABAME with γ- and β-cyclodextrins (CD), which were systematically characterized through molecular modeling studies as well as FTIR, XRD, DSC, TGA, and SEM analyses. In vitro analyses of lipase activity were performed to evaluate possible anti-obesity properties. Molecular modeling studies indicated that the CD:ABAME ICs prepared at a 2:1 molar ratio would be more stable to the complexation process than those prepared at a 1:1 molar ratio. The physicochemical characterization showed strong evidence that corroborates with the in silico results, and the formation of ICs with CD was capable of inducing changes in ABAME physicochemical properties. ICs was shown to be a stronger inhibitor of lipase activity than Orlistat and to potentiate the inhibitory effects of ABAME on porcine pancreatic enzymes. In conclusion, a new pharmaceutical preparation with potentially improved physicochemical characteristics and inhibitory activity toward lipases was developed in this study, which could prove to be a promising ingredient for future formulations.     

Preparation and evaluation of an experimental luting glass ionomer cement to be used in dentistry

The aim of this paper is to compare the fluoride-releasing and mechanical properties of an experimental luting glass ionomer cement, which has a modified composition and a commercial luting cement. The experimental powder was obtained by sol–gel process and then, it was used to prepare the experimental cements. The properties of cement pastes, such as setting time and working time, microhardness and diametral tensile strength were determined. Fluoride release from GICs was evaluated at time intervals of 1, 7, 14, 21 and 28 days in deionized water. Atomic force microscopy (AFM) analyses showed that the surface of the experimental cements is more homogeneous than commercial GICs. The mechanical properties and the measure of liberation of fluoride of the two cements were influenced by ratio powder:liquid and chemical composition of the precursor powders. Experimental cements released less fluoride than commercial cements. However, this liberation was more constant during the analyzed period. Thus, the results obtained in this study indicated that the composition of the experimental powder modified by the niobium can lead the formation of the polysalt matrix with good mechanical properties. In other words, we can say that experimental powder offered considerable promise for exploitation in dental field.     

Mercury contamination in fish from gold mining areas in Indonesia and human health risk assessment

This study investigates the effects on fish and assesses human health hazards from mercury released in two gold mining areas in Indonesia: Tatelu (North Sulawesi Province) and Galangan (Katingan District, Central Kalimatan Province). In Tatelu, 154 fish specimens of 10 freshwater species were collected, as well as five marine species from the fish market. The mean concentration of total mercury in muscles of freshwater fish from this area was 0.58+/-0.44 microg/g, with more than 45% of fish having Hg levels above the WHO guideline for human consumption of 0.5 microg/g. In Galangan, where 263 fish specimens of 25 species were collected, the total mercury in muscles averaged 0.25+/-0.69 microg/g. Excluding data from flooded open pits in sub-area P4, mean Hg levels in fish from Galangan were 2 to 4 times lower than 0.5 microg/g, while fewer than 10% of fish from Galangan exceeded WHO guidelines. The Hazard Quotient (HQ) was applied to both areas to determine the threat of MeHg exposure for communities in both areas. The HQ is a risk assessment indicator which defines the ratio of exposure level to a single substance in relation to a reference dose. Samples from Tatelu (excluding marine species) had an HQ above one, while those from Galangan resulted in values of 2.4 for the whole area and 9.9 for sub-area P4, pointing to potentially harmful fish consumption for the local population. By using the single-compartment model to estimate mercury levels in blood and hair from daily intake dose, sub-area P4 showed the highest levels, higher than the upper limit guideline for pregnant women, but still lower than threshold levels associated with observed clinical effects.     

Water and Gallium at Absolute Negative Pressures. Loci of Maximum Density and of Melting

Several physical properties of liquids as well as those of the coexistence between liquid and solid can be determined at absolute negative pressures. Examples for this include thermal pressure coefficients, loci of temperature of maximum density, melting lines, speed of propagation of low-intensity sound waves, and (p, T, x) conditions of occurrence of liquid/liquid phase separation. Three model temperature-pressure cycles, which allow for the measurement of temperature-pressure conditions of the occurrence of maxima of liquid density, negatively sloped fusion lines, and the upper critical solution temperature (UCST) of liquid solutions in these metastable regimes are described. A new apparatus for measuring negative pressures was developed. The temperature and pressure are determined within an uncertainty of ±0.05°C and ±5 bar, respectively. Water and heavy water have been used as testing systems with respect to the location of their temperatures of maximum density (TMD) loci. Empirical equations of state whose parameters have been fitted to experimental data located in the normal positive pressure region have proven to extrapolate well to the negative pressure regime. Furthermore, an attempt was made to use SAFT in order to provide a more theoretically founded framework. Preliminary results for gallium have shown that a TMD exists 45 K inside the supercooled regime, and that the continuation of its melting line down to –80 bar evolves with a slope of –515±25 bar·K^–1.     

Removal of dichloromethane from waste gases in one- and two-liquid-phase stirred tank bioreactors and biotrickling filters

The removal of dichloromethane (DCM) from polluted air was studied both in biotrickling filters and in continuous stirred tank bioreactors, using either a single-liquid aqueous phase or a combination of an aqueous-organic liquid phase. The presence of the organic phase, i.e. silicone oil, at a volume ratio of 10% of the liquid phase, increased the maximum EC by about 25% in the BTF, reaching 200 g m³/h, and by as much as 300% in the CSTB, reaching 350 g m³/h. Based on data of chloride release in the aqueous phase and carbon dioxide production in the gas phase, complete dechlorination and mineralization of the pollutant could be confirmed. When applying shock loads, a more stable behaviour was observed in the presence of the organic phase. Generally, the completely mixed reactors were also more stable than the plug-flow biotrickling filters, irrespective of the presence of the organic phase. The use of molecular techniques allowed showing that the originally inoculated DCM-degrading Hyphomicrobium strains remained present, although not dominant, after long-term bioreactor operation. Different new bacterial populations did also appear in the systems, some of which were unable to degrade DCM.     

Colour assays: An inside look into Alentejo traditional limewash paintings and coloured lime mortars

A series of colour assays were conducted taking into account old bibliographic recommendations and oral testimony regarding traditional lime painting technology from the Alentejo (South Portugal) region. The main objectives were: (a) the colorimetric analysis of paintings made with different limewash preparation methods; (b) the comparison between natural processed red and yellows ochre pigments (“home made” and from industrial origin) and synthetic iron oxides in different concentrations and lime proportions; (c) the evaluation of the colorimetric CIELAB coordinates during the lime carbonation process in coloured mortars and limewashes. The results shows that the evolution of L*, a*, and b* during the carbonation process is independent of pigment concentration and paint thickness but dependent of pigment composition and finishing technique (lime painting or coloured mortar). They also emphasize the importance of surface appearance attributes and its influence on the colorimetric parameters. © 2010 Wiley Periodicals, Inc. Col Res Appl, 36, 61–71, 2011