Biodegradation and effect of formaldehyde and phenol on the denitrification process

Formaldehyde and phenol biodegradation during the denitrification process was studied at lab-scale, first in anoxic batch assays and then in a continuous anoxic reactor. The biodegradation of formaldehyde (260 mgl(-1)) as single carbon source and at phenol concentrations ranging from 30 to 580 mgl(-1) was investigated in batch assays, obtaining an initial biodegradation rate around 0.5g CH(2)OgVSS(-1)d(-1). With regard to phenol, its complete biodegradation was only observed at initial concentrations of 30 and 180 mgl(-1). The denitrification process was inhibited at phenol concentrations higher than 360 mgl(-1). Studies were also done using a continuous anoxic upflow sludge blanket reactor in which formaldehyde removal efficiencies above 99.5% were obtained at all the applied formaldehyde loading rates, between 0.89 and 0.14g COD (CH(2)O)l(-1)d(-1). The phenol loading rate was increased from 0.03 to 1.3g COD (C(6)H(6)O)l(-1)d(-1). Phenol removal efficiencies above 90.6% were obtained at phenol concentrations in the influent between 27 and 755 mgl(-1). However, when the phenol concentration was increased to 1010 mgl(-1), its removal efficiency decreased. Denitrification percentages around 98.4% were obtained with phenol concentrations in the influent up to 755 mgl(-1). After increasing phenol concentration to 1010 mgl(-1), the denitrification percentage decreased because of the inhibition caused by phenol.     

Role of Cellulose Ether Polymers on Ibuprofen Release from Matrix Tablets

Cellulose derivatives are the most frequently used polymers in formulations of pharmaceutical products for controlled drug delivery. The main aim of the present work was to evaluate the effect of different cellulose substitutions on the release rate of ibuprofen (IBP) from hydrophilic matrix tablets. Thus, the release mechanism of IBP with methylcellulose (MC25), hydroxypropylcellulose (HPC), and hydroxypropylmethylcellulose (HPMC K15M or K100M) was studied. In addition, the influence of the diluents lactose monohydrate (LAC) and β-cyclodextrin (β-CD) was evaluated. Distinct test formulations were prepared containing: 57.14% of IBP, 20.00% of polymer, 20.29% of diluent, 1.71% of talc lubricants, and 0.86% of magnesium stearate as lubricants. Although non-negligible drug-excipient interactions were detected from DSC studies, these were found not to constitute an incompatibility effect. Tablets were examined for their drug content, weight uniformity, hardness, thickness, tensile strength, friability, porosity, swelling, and dissolution performance. Polymers MC25 and HPC were found to be unsuitable for the preparation of this kind of solid dosage form, while HPMC K15M and K100M showed to be advantageous. Dissolution parameters such as the area under the dissolution curve (AUC), the dissolution efficiency (DE_{20 h}), dissolution time (t 50%), and mean dissolution time (MDT) were calculated for all the formulations, and the highest MDT values were obtained with HPMC indicating that a higher value of MDT signifies a higher drug retarding ability of the polymer and vice-versa. The analysis of the drug release data was performed in the light of distinct kinetic mathematical models—Kosmeyer-Peppas, Higuchi, zero-, and first-order. The release process was also found to be slightly influenced by the kind of diluent used.     

Toluene Dioxygenase‐Catalysed Oxidation of Benzyl Azide to Benzonitrile: Mechanistic Insights for an Unprecedented Enzymatic Transformation

Enzymatic dioxygenation of benzyl azide by toluene dioxygenase (TDO) produces significant amounts of the cis‐cyclohexadienediol derived from benzonitrile, along with the expected azido diols. We demonstrate that TDO catalyses the oxidation of benzyl azide to benzonitrile, which is further dioxygenated to produce the observed cis‐diol. A proposed mechanism for this transformation involves initial benzylic monooxygenation followed by a nitrene‐mediated rearrangement to form an oxime, which is further dehydrated to afford the nitrile. To the best of our knowledge, this is the first report of enzymatic oxidation of an alkyl azide to a nitrile. In addition, the described oxime‐dehydration activity has not been reported for Rieske dioxygenases.     

The extraction of passion fruit oil with green solvents

In the present paper, the extraction of passion fruit oil with acetone, ethanol and isopropanol of passion fruit seeds under three different techniques (ultrasound, shaker and soxhlet) were studied. The influence of seed to solvent ratio, time and type of solvent were investigated during ultrasound, shaker and soxhlet process. Hexane was used as well, as an extraction solvent to evaluate the extraction of oil in all extraction process studied to make a comparison among the employed solvents. The temperature was kept isoterminally at 40 °C in both shaker and ultrasound process. The highest yield when green solvents were was 23.8%, during ultrasound process, with acetone was used. Our results indicate that ultrasound can greatly replace the conventional extraction.     

Determining wind turbine power curves based on operating conditions

The relation between wind speed and electrical power—the power curve—is essential in the design, management and power forecasting of a wind farm. The power curve is the main characteristic of a wind turbine, and a procedure is presented for its determination, after the wind turbine is installed and in operation. The procedure is based on both computational and statistical techniques, in situ measurements, nacelle anemometry and operational data. This can be an alternative or a complement to procedures fully based on field measurements as in the International Electrotechnical Commission standards, reducing the time and costs of such practices. The impact of a more accurate power curve was measured in terms of the prediction error of a wind power forecasting system over 1 year of operation, whereby the methodology for numerical site calibration was presented and the concepts of ideal power curve and nacelle power curve introduced. The validation was based on data from wind turbines installed at a wind farm in complex topography, in Portugal, providing a real test of the technique presented here. The contribution of the power curve to the wind power forecasting uncertainty was found to be from 10% to 15% of the root mean square error. Copyright © 2013 John Wiley & Sons, Ltd.     

Effect of tool setting error on the topography of surfaces machined by peripheral milling

In peripheral milling operations, errors in the tool setting on the spindle create roughness heterogeneity bands on the milled surfaces. This represents a defect in the appearance of the surfaces that cannot be ignored when surfaces have to meet high aesthetic requirements. Although the existence of these bands has been reported long ago, a quantitative evaluation has not been made so far.This paper presents a new model that allows the prediction of bands generated on surfaces machined by peripheral milling. This model accounts for tool setting errors: cutter parallel axis offset and cutter axis tilt. Through the proposed model, the effects of tool setting error, cutter geometry and feed, on band position, width and roughness are evaluated. Cutting tests were carried out to validate the model predictions and it was found that model predictions on band position and width agreed reasonably well with experimental results.