Line patterning of graphite and the fabrication of cheap, inexpensive, “throw-away” sensors

A new simple method (“line patterning technique”) using only standard office equipment is described whereby clearly defined, electrically conducting patterns of graphite can be deposited on polymer (plastic) or paper substrates. The properties of the conductive patterns have been characterized by electrical conductivity and SEM measurements. Sensors were constructed by using interdigitated patterns of graphite deposited on plastic and paper, and coated with a thin film of conducting electronic polymer, e.g. polyaniline emeraldine salt.     

Ocular recognition databases and competitions: a survey

The use of the iris and periocular region as biometric traits has been extensively investigated, mainly due to the singularity of the iris features and the use of the periocular region when the image resolution is not sufficient to extract iris information. In addition to providing information about an individual’s identity, features extracted from these traits can also be explored to obtain other information such as the individual’s gender, the influence of drug use, the use of contact lenses, spoofing, among others. This work presents a survey of the databases created for ocular recognition, detailing their protocols and how their images were acquired. We also describe and discuss the most popular ocular recognition competitions (contests), highlighting the submitted algorithms that achieved the best results using only iris trait and also fusing iris and periocular region information. Finally, we describe some relevant works applying deep learning techniques to ocular recognition and point out new challenges and future directions. Considering that there are a large number of ocular databases, and each one is usually designed for a specific problem, we believe this survey can provide a broad overview of the challenges in ocular biometrics.

     

A quantitative approach to ranking corporate law precedents in the Brazilian Superior Court of Justice

This paper aims to contribute to the goal of finding influential legal precedents by quantitative methods. A lot of work has been made in this direction worldwide, especially in the context of common law jurisdictions. However, this type of work is extremely scarce in the Brazilian literature. In addition, our work also contributes to the research of network analysis and the law by applying these methods to unprecedented amount of data and narrowing our inquiry to a single law area, corporate law. Furthermore, whereas most of the literature applying network analysis to judicial decisions had access to readily available data on the citations to precedent within each ruling, our raw data was nothing but the full text of decisions. We focus on data produced by the Superior Court of Justice (STJ), the highest court in Brazil for matters of federal law, including statutory interpretation of civil, criminal and corporate law. The Court issued an astonishing 282040 opinions tagged as related to corporate law between 2008 and 2018. This amount of cases is unparalleled internationally for superior courts and for studies in network analysis and law. In our results, we rank precedents quantitatively based on the citations they receive and make. We also qualitatively analyze some of the results, especially related to groups identified in the network with the Modularity algorithm. Our findings also reveal that corporate law jurisprudence in the STJ is quantitatively dominated by a few legal issues around one single theme that is only tangentially related to corporate law. That is, a type of contract used for the expansion of telephone landlines, which also allowed the consumer to become a shareholder of the telecommunication company. This comparison is especially pertinent because the utter lack of data on the quantitative weight of STJ precedents means the national literature has been operating in a void of objective measurements, one which has been filled with cherry-picked rulings and subjective ranking criteria.

     

Topology optimization of continuum structures subjected to uncertainties in material properties

This work addresses the use of the topology optimization approach to the design of robust continuum structures under the hypothesis of uncertainties with known second‐order statistics. To this end, the second‐order perturbation approach is used to model the response of the structure, and the midpoint discretization technique is used to discretize the random field. The objective function is a weighted sum of the expected compliance and its standard deviation. The optimization problem is solved using a traditional optimality criteria method. It is shown that the correlation length plays an important role in the obtained topology and statistical moments when only the minimization of the standard deviation is considered, resulting in more and thinner reinforcements as the correlation length decreases. It is also shown that the minimization of the expected value is close to the minimization of the deterministic compliance for small variations of Young's modulus. Copyright © 2016 John Wiley & Sons, Ltd.     

Transmission power and data rate aware routing on wireless networks

Wireless networks can vary both the transmission power and modulation of links. Existing routing protocols do not take transmission power control (TPC) and modulation adaptation (also known as rate adaptation – RA) into account at the same time, even though the performance of wireless networks can be significantly improved when routing algorithms use link characteristics to build their routes. This article proposes and evaluates extensions to routing protocols to cope with TPC and RA. The enhancements can be applied to any link state or distance vector routing protocols. An evaluation considering node density, node mobility and link error show that TPC- and RA-aware routing algorithms improve the average latency and the end-to-end throughput, while consuming less energy than traditional protocols.     

SUTIL – Network selection based on utility function and integer linear programming

This work presents SUTIL, a mechanism for network selection in the context of next generation networks (NGN). SUTIL selection mechanism prioritizes networks with higher relevance to the application and lower energy consumption and it enables full and seamless connectivity to mobile user devices and applications. Consequently, SUTIL contributes to realize the vision of ubiquitous computing, in which services, devices, and sensor-enriched environments interact anytime, anywhere to accomplish human designed tasks. The provided solution is based on utility function and integer linear programming and it aims at: (i) maximizing the user satisfaction while meeting application QoS and (ii) minimizing the energy consumption of devices when connecting to a target network. The solution is global since it considers for a given base station all devices that are simultaneously candidate for handoff. Simulation results showed the benefits of SUTIL usage in NGN environments.     

3D face computational photography using PCA spaces

In this paper, we present a 3D face photography system based on a facial expression training dataset, composed of both facial range images (3D geometry) and facial texture (2D photography). The proposed system allows one to obtain a 3D geometry representation of a given face provided as a 2D photography, which undergoes a series of transformations through the texture and geometry spaces estimated. In the training phase of the system, the facial landmarks are obtained by an active shape model (ASM) extracted from the 2D gray-level photography. Principal components analysis (PCA) is then used to represent the face dataset, thus defining an orthonormal basis of texture and another of geometry. In the reconstruction phase, an input is given by a face image to which the ASM is matched. The extracted facial landmarks and the face image are fed to the PCA basis transform, and a 3D version of the 2D input image is built. Experimental tests using a new dataset of 70 facial expressions belonging to ten subjects as training set show rapid reconstructed 3D faces which maintain spatial coherence similar to the human perception, thus corroborating the efficiency and the applicability of the proposed system.     

A DSS for integrated distribution of empty and full containers

A DSS integrating empty and full containers transshipment operations is presented, addressing the typically unbalanced export/import containers trading problem. The problem is modeled as a network, where nodes represent customers, leasing companies, harbors and warehouses, while arcs represent transportation routes. The underlying mathematical model operates in stages, first prioritizing and adjusting full containers demands considering available empty containers supplies, and then statically optimizing costs. Transportation routes are registered and dynamically controlled, cyclically, for a given time horizon. The DSS is flexible, allowing several parameters to be configured. Experimental examples using randomly generated parameters were conducted to evaluate the effectiveness of the system.     

Anodic stripping voltammetric determination of copper(II) using a functionalized carbon nanotubes paste electrode modified with crosslinked chitosan

The development and application of a functionalized carbon nanotubes paste electrode (CNPE) modified with crosslinked chitosan for determination of Cu(II) in industrial wastewater, natural water and human urine samples by linear scan anodic stripping voltammetry (LSASV) are described. Different electrodes were constructed using chitosan and chitosan crosslinked with glutaraldehyde (CTS-GA) and epichlorohydrin (CTS-ECH). The best voltammetric response for Cu(II) was obtained with a paste composition of 65% (m/m) of functionalized carbon nanotubes, 15% (m/m) of CTS-ECH, and 20% (m/m) of mineral oil using a solution of 0.05 mol L⁻¹ KNO₃ with pH adjusted to 2.25 with HNO₃, an accumulation potential of −0.3 V vs. Ag/AgCl (3.0 mol L⁻¹ KCl) for 300 s and a scan rate of 100 mV s⁻¹. Under these optimal experimental conditions, the voltammetric response was linearly dependent on the Cu(II) concentration in the range from 7.90 × 10⁻⁸ to 1.60 × 10⁻⁵ mol L⁻¹ with a detection limit of 1.00 × 10⁻⁸ mol L⁻¹. The samples analyses were evaluated using the proposed sensor and a good recovery of Cu(II) was obtained with results in the range from 98.0% to 104%. The analysis of industrial wastewater, natural water and human urine samples obtained using the proposed CNPE modified with CTS-ECH electrode and those obtained using a comparative method are in agreement at the 95% confidence level.