Effects of microcompounding process parameters on the properties of ABS/polyamide‐6 blends based nanocomposites

Melt intercalation method was applied to produce acrylonitrile‐butadiene‐styrene/polyamide‐6 (ABS/PA6) blends based organoclay nanocomposites using a conical twin‐screw microcompounder. The blend was compatibilized using a maleated olefinic copolymer. The effects of microcompounding conditions such as screw speed, screw rotation‐mode (co‐ or counter‐), and material parameters such as blend composition and clay loading level on the morphology of the blends, dispersibility of nanoparticles, and mechanical properties were investigated. Furthermore, corotating screws were modified to achieve elongational flow which is efficient for obtaining dispersive mixing. The morphology was examined by SEM analysis after preferential extraction of the minor phase. Subsequently, the SEM micrographs were quantitatively analyzed using image analyzer software. The morphology of the blends indicated that processing with counter‐rotation at a given screw speed yielded coarser morphology than that of processed with corotation. X‐ray diffraction analysis showed that highest level of exfoliation is observed with increasing PA6 content, at 200 rpm of screw speed and in corotation mode. Also, the effects of screw speed, screw rotation mode, and screw modification were discussed in terms of XRD responses of the nanocomposites. The aspect ratio of the clay particles which were measured by performing image analysis on TEM micrographs exhibited a variation with processing conditions and they are in accordance with the modulus of the nanocomposites. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

A Fast and Validated Method for the Determination of Malondialdehyde in Fish Liver Using High‐Performance Liquid Chromatography with a Photodiode Array Detector

Malondialdehyde (MDA) is a biomarker of lipid peroxidation and is present in foods and biological samples such as plasma. A high‐performance liquid chromatography (HPLC) method was applied to determine MDA in fish liver samples after derivatization with 2,4‐dinitrophenylhydrazine (DNPH) using a ODS2 column (10 cm × 4.6 mm, 3 μm) and a photodiode array detector. The mobile phase consisted of 0.2% acetic acid (v/v) in distilled water and acetonitrile (42:58, v/v). The present method was validated in terms of linearity, lower limit of quantification, lower limit of detection, precision, accuracy, recovery, and stability of MDA according to U.S. Food and Drug Administration (FDA) guidelines. The limit of quantification of MDA was 0.39 μmol/L, which is comparable to other methods. The recovery of the spiked MDA liver samples was in the range of 92.4% to 104.2%. This newly modified HPLC method is specific, sensitive, and accurate and allows the analysis of MDA within 4 min in fish liver but also in other tissues and plasma.     

Influence of fat content and emulsifier type on the rheological properties of cake batter

The effects of fat content and emulsifier type on the rheological properties of cake batter have been investigated by using a parallel-plate rheometer. The apparent viscosity of cake batter with five different fat concentrations (0, 12.5, 25, 37.5, and 50%) and two types of emulsifier, namely Purawave and Lecigran, was studied as a function of the shear rate. In addition, the time dependency of different cake formulations was investigated. It was found that cake batter with different fat concentrations and emulsifier types exhibited shear thinning and time-independent behavior. Experimental data provided a good fit for the power law model. The increase in fat content and addition of emulsifier caused a decrease in the apparent viscosity. The flow behavior index was not found to be dependent on the composition of cake batter.     

Efficacy of various plant hydrosols as natural food sanitizers in reducing Escherichia coli O157:H7 and Salmonella Typhimurium on fresh cut carrots and apples

In the present study, inhibitory effects of the hydrosols of thyme, black cumin, sage, rosemary and bay leaf were investigated against Salmonella Typhimurium and Escherichia coli O157:H7 inoculated to apple and carrots (at the ratio of 5.81 and 5.81 log cfu/g for S. Typhimurium, and 5.90 and 5.70 log cfu/g for E. coli O157:H7 on to apple and carrot, respectively). After the inoculation of S. Typhimurium or E. coli O157:H7, shredded apple and carrot samples were washed with the hydrosols and sterile tap water (as control) for 0, 20, 40 and 60 min. While the sterile tap water was ineffective in reducing (P > 0.05) S. Typhimurium and E. coli O157:H7, 20 min hydrosol treatment caused a significant (P < 0.05) reduction compared to the control group. On the other hand, thyme and rosemary hydrosol treatments for 20 min produced a reduction of 1.42 and 1.33 log cfu/g respectively in the E. coli O157:H7 population on apples. Additional reductions were not always observed with increasing treatment time. Moreover, thyme hydrosol showed the highest antibacterial effect on both S. Typhimurium and E. coli O157:H7 counts. Inhibitory effect of thyme hydrosol on S. Typhimurium was higher than that for E. coli O157:H7. Bay leaf hydrosol treatments for 60 min reduced significantly (P < 0.05) E. coli O157:H7 population on apple and carrot samples. In conclusion, it was shown that plant hydrosols, especially thyme hydrosol, could be used as a convenient sanitizing agent during the washing of fresh-cut fruits and vegetables.     

Microfabrication of vacuum-sealed cavities with nanocrystalline and ultrananocrystalline diamond membranes and their characteristics

Vacuum-sealed cavities featuring diamond membranes are fabricated using plasma-activated direct bonding technology. A chemical mechanical polished (CMP) silicon dioxide interlayer, deposited on diamond with a high temperature oxide (HTO) process at 850 °C in a low pressure chemical vapor deposition (LPCVD) furnace, is employed for successful direct bonding and vacuum cavity formation. The circular cavities are defined on the thermally grown oxide of the phosphorus-doped Si wafer (4-in, < 100>, 1.2 Ω/sq) using reactive ion etching (RIE). The same microfabrication steps are applied for low residual stress (i.e. < 50 MPa) nanocrystalline (NCD) and ultrananocrystalline (UNCD) diamonds to determine and compare membrane characteristics. For both diamond types, successful microfabrication of membranes is demonstrated using the optimized process flow. Profilometer measurements of membrane deflection are compared with finite element modeling (FEM), and indicate a Young's modulus of 1000 GPa for NCD and 850 GPa for UNCD. Furthermore, FEM analysis suggests the residual stress of UNCD membrane is approximately 100 MPa tensile, whereas NCD one does not show any significant residual stress (< 50 MPa). Our results show that NCD is a more promising choice than UNCD as a membrane material for electromechanical transducers.     

The adsorption of malachite green (MG) as a cationic dye onto functionalized multi walled carbon nanotubes

Synthetic dyes are widely used by several industries to color their products. The discharge of colored wastewater into the hydrosphere causes serious environmental problems. We used functionalized multi wall carbon nanotubes as an adsorbent for the adsorption of cationic dye, malachite green, from aqueous solution. Based on information provided by the Iranian Research Institute of Petroleum Industry, carbon nanotubes are produced using a chemical vapor deposition (CVD) technique. These as-received MWCNTs were functionalized by acid treatment. The remaining dye concentration was read by UV-visible absorption spectroscopy at maximum adsorption wavelength. The effect of different operational parameters such as contact time, pH of solution, adsorbent dose and initial dye concentration were studied. The results showed that by increasing of contact time, pH and adsorbent dose the removal of dye increased, but by increasing initial dye concentration, the removal efficiency decreased. Adsorption isotherms and kinetics behavior of f-MWCNTs for removal of malachite green was analyzed, and fitted to various existing models. The experimental data were well correlated with the Langmuir isotherm with a maximum adsorption capacity (q _m ) and regression coefficient (R²) of 142.85 mg/g and 0.997, respectively. The results of this study indicate that functionalized multi wall carbon nanotubes can be used as an effective adsorbent for the removal of dyes.     

Effect of ZnO type and concentration on the mophology,thermal, and mechanical properties of poly(ether ester)/ZnO composites

Poly(ether ester) (PEE) copolymers were synthesized in a two‐stage process involving transesterification and polycondensation. The synthesized copolymer and the zinc oxide (ZnO) were used in composite preparation by melt compounding. The influence of ZnO type and concentration on the morphology, thermal and mechanical properties of the composites were studied. DSC and XRD analyses indicated that crystallinity of composites was slightly reduced with ZnO content. Homogeneous dispersion of fillers in the polymer matrix was observed through morphological analyses. While in general tensile strength and elongation at break values of the composites decreased with increasing ZnO content, elastic modulus values increased with the addition of ZnO. Moreover, ZnO particles were modified with poly(N‐vinyl pyrrolidone) and a slight improvement in mechanical properties was observed, respectively over the composites containing unmodified particles. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Polymer Nanocomposite Hydrogels with Improved Metal Adsorption Capacity and Swelling Behavior: Influence of Spirulina Immobilization onto Montmorillonite Clay

Polacrylamide nanocomposite hydrogels were prepared by in situ free radical polymerization reaction in presence of Spirulina microalgae, which is immobilized in montmorillonite clay (Sp-MMT). The nanocomposite hydrogel having 1 wt.% Sp-MMT clay was found to have desired exfoliated structure, maximum swelling and improved thermal stability. It also showed maximum metal adsorption capacity, which is about 312% higher than that of neat PAAm hydrogel at the highest metal concentration. The presence of Spirulina's porous network structure where all potential binding sites are under receptive position was found to be responsible for the dramatic increase in the metal adsorption and swelling behavior.     

Solid–Liquid Interfacial Energy of Solid Neopentylglycol Solution in Equilibrium with Neopentylglycol–Aminomethylpropanediol Eutectic Liquid

The grain boundary groove shapes for solid neopentylglycol solution (NPG-40 mol pct AMPD) in equilibrium with the neopentylglycol (NPG)–aminomethylpropanediol (AMPD) eutectic liquid (NPG-42.2 mol pct AMPD) have been directly observed using a horizontal linear temperature gradient apparatus. From the observed grain boundary groove shapes, the Gibbs–Thomson coefficient (Г) and solid–liquid interfacial energy (σ _SL) of solid NPG solution have been determined to be (7.4 ± 0.7) × 10^?8 K m and (6.4 ± 1.0) × 10^?3 J m^?2, respectively. The grain boundary energy of solid NPG solution has been determined to be (12.5 ± 1.0) × 10^?3 J m^?2 from the observed grain boundary groove shapes. The ratio of thermal conductivity of equilibrated eutectic liquid to thermal conductivity of solid NPG solution has also been determined to be 0.48.