On delay adjustment for dynamic load balancing in distributed virtual environments

Distributed virtual environments (DVEs) are becoming very popular in recent years, due to the rapid growing of applications, such as massive multiplayer online games (MMOGs). As the number of concurrent users increases, scalability becomes one of the major challenges in designing an interactive DVE system. One solution to address this scalability problem is to adopt a multi-server architecture. While some methods focus on the quality of partitioning the load among the servers, others focus on the efficiency of the partitioning process itself. However, all these methods neglect the effect of network delay among the servers on the accuracy of the load balancing solutions. As we show in this paper, the change in the load of the servers due to network delay would affect the performance of the load balancing algorithm. In this work, we conduct a formal analysis of this problem and discuss two efficient delay adjustment schemes to address the problem. Our experimental results show that our proposed schemes can significantly improve the performance of the load balancing algorithm with neglectable computation overhead.     

DDFSGEN

This paper presents a functional compiler for the automatic design of Direct Digital Frequency Synthesizer (DDFS) integrated circuits (ICs) using a ROM based table look-up architecture. The compiler allows the user to specify high-level specifications such as the acceptable spurious response and it generates the IC architecture, floorplan, and layout. To construct the layout for different specifications, a library of parameterized macrocells has been developed in 1.2 m CMOS technology.A test chip with a quadrature DDFS module has been generated, using the compiler, and fabricated. The chip has two input signals: one is for frequency control while the other is for phase initialization. Input and output word lengths are 16 bits and 6 bits respectively. The chip complexity is approximately 12,000 transistors (DDFS core) and the die size is 4.8×2.9mm ². A maximum sample rate of 80 MHz has been attained implying a maximum sine (cosine) output frequency of 40 MHz and a frequency resolution of 1.22 kHz. The maximum spurious level measured is –46 dB.     

Nuclear Receptor Nur77 Controls Cardiac Fibrosis through Distinct Actions on Fibroblasts and Cardiomyocytes

Fibrosis is a hallmark of adverse cardiac remodeling, which promotes heart failure, but it is also an essential repair mechanism to prevent cardiac rupture, signifying the importance of appropriate regulation of this process. In the remodeling heart, cardiac fibroblasts (CFs) differentiate into myofibroblasts (MyoFB), which are the key mediators of the fibrotic response. Additionally, cardiomyocytes are involved by providing pro-fibrotic cues. Nuclear receptor Nur77 is known to reduce cardiac hypertrophy and associated fibrosis; however, the exact function of Nur77 in the fibrotic response is yet unknown. Here, we show that Nur77-deficient mice exhibit severe myocardial wall thinning, rupture and reduced collagen fiber density after myocardial infarction and chronic isoproterenol (ISO) infusion. Upon Nur77 knockdown in cultured rat CFs, expression of MyoFB markers and extracellular matrix proteins is reduced after stimulation with ISO or transforming growth factor–β (TGF-β). Accordingly, Nur77-depleted CFs produce less collagen and exhibit diminished proliferation and wound closure capacity. Interestingly, Nur77 knockdown in neonatal rat cardiomyocytes results in increased paracrine induction of MyoFB differentiation, which was blocked by TGF-β receptor antagonism. Taken together, Nur77-mediated regulation involves CF-intrinsic promotion of CF-to-MyoFB transition and inhibition of cardiomyocyte-driven paracrine TGF-β-mediated MyoFB differentiation. As such, Nur77 provides distinct, cell-specific regulation of cardiac fibrosis.     

Is LRP2 Involved in Leptin Transport over the Blood-Brain Barrier and Development of Obesity?

The mechanisms underlying the transport of leptin into the brain are still largely unclear. While the leptin receptor has been implicated in the transport process, recent evidence has suggested an additional role of LRP2 (megalin). To evaluate the function of LRP2 for leptin transport across the blood-brain barrier (BBB), we developed a novel leptin-luciferase fusion protein (pLG), which stimulated leptin signaling and was transported in an in vitro BBB model based on porcine endothelial cells. The LRP inhibitor RAP did not affect leptin transport, arguing against a role of LRP2. In line with this, the selective deletion of LRP2 in brain endothelial cells and epithelial cells of the choroid plexus did not influence bodyweight, body composition, food intake, or energy expenditure of mice. These findings suggest that LRP2 at the BBB is not involved in the transport of leptin into the brain, nor in the development of obesity as has previously been described.     

基于UG平台的塑料异型材挤出模标准件库的建立

针对塑料异型材挤出模中存在大量标准件这一特点,以UG软件为开发平台,利用VC++6 0面向对象的编程技术,在UG/OpenAPI开发平台上,创建参数化图库、设计用户界面、实现参数化尺寸驱动,总结了系统的主要功能和特点,建立了三维塑料异型材挤出模的标准件库。     

Fitting polynomial surfaces to triangular meshes with Voronoi squared distance minimization

This paper introduces Voronoi squared distance minimization (VSDM), an algorithm that fits a surface to an input mesh. VSDM minimizes an objective function that corresponds to a Voronoi-based approximation of the overall squared distance function between the surface and the input mesh (SDM). This objective function is a generalization of the one minimized by centroidal Voronoi tessellation, and can be minimized by a quasi-Newton solver. VSDM naturally adapts the orientation of the mesh elements to best approximate the input, without estimating any differential quantities. Therefore, it can be applied to triangle soups or surfaces with degenerate triangles, topological noise and sharp features. Applications of fitting quad meshes and polynomial surfaces to input triangular meshes are demonstrated.     

The effect of cavity-filling mutations on the thermostability of Bacillus stearothermophilus neutral protease

Cavities in the hydrophobic core of the neutral protease ofBacillus stearothermophilus were analyzed using a threedimensionalmodel that was inferred from the crystal structure of thermolysin,the highly homologous neutral protease of B.thermoproteolyticus(85% sequence identity). Site–directed mutagenesis wasused to fill some of these cavities, thereby improving hydrophobicpacking in the protein interior. The mutations had small effectson the thermostability, even after drastic changes, such asLeu284Trp and Met168Trp. The effects on T50, the temperatureat which 50% of the enzyme is irreversibly inactivated in 30min, ranged from 0.0 to +0.4°C. These results can be explainedby assuming that the mutations have positive and negative structuraleffects of approximately the same magnitude. Alternatively,it could be envisaged that the local unfolding steps, whichrender the enzyme susceptible towards autolysis and which arerate limiting in the process of thermal inactivation, are onlyslightly affected by alterations in the hydrophobic core.     

Ergonomic contribution of ABLE exoskeleton in automotive industry

In PSA Peugeot Citroen factories, high precision requirements of workstations make them being manual. One of the main goal of the car manufacturer is to minimize the pain of workers while maintaining high efficiency of production lines. Consequently, assisting operators with an exoskeleton is a potential solution for improving ergonomics of painful workstations while respecting industrial constraints. To determine ergonomic performances of an exoskeleton, human joint angles and torques, ground reaction forces, and duration of operations are analysed for eight subjects performing a representative screwing task. Experiments were performed using ABLE upper-limb exoskeleton, developed by the French Atomic Energy Commission (CEA), which has the functionality to compensate arm and tools loads. Results show a clear reduction of the sum of the joints torques, up to 38.9%, given by ABLE supply and invite to make concrete the use of exoskeletons in car assembly lines.     

Tissue variation in hydrocarbon composition in the rabbit

This study, which deals with the distribution of hydrocarbons in seven types of rabbit tissues, was done for the purpose of providing information that might help shed light on the biological relevance of the hydrocarbons in mammalian metabolism. Liver, kidneys, brain, spleen, skeletal muscle, perinephric adipose, and a sample of blood serum were collected from a single animal for analysis of their hydrocarbon composition. The analytical methodology consisted of solvent extraction, saponification (adipose), elution chromatography on hydrated alumina, and combined gas chromatography-mass spectrometry. Hydrocarbons were detected in all of the tissues examined at concentrations estimated to range from 0.1 to 0.01% of the total lipid extracted. Three quite distinct distribution modes were recognized. The bulk of the identified components consisted of normal, saturated, nonterpenoid hydrocarbons in the C₁₆ to C₃₃ range. Squalene, phytene, phytadiene, and pristane were the only terpenoids detected. Nonterepenoid branched (iso andanteiso) hydrocarbons were identified unequivocally and in significant amounts in the muscle only. The adipose was the only tissue which was relatively rich in monoalkenes, and its overall hydrocarbon composition closely resembled that of the feed. The results of the study are not consistent with metabolic inertness. The observed qualitative and quantitative differences might reflect function and metabolic activities of the individual organs in a way yet to be elucidated. Presented in part at the AOCS Spring Meeting, New Orleans, April, 1976.     

Diamond growth by carbon ion implantation of diamond

Medium energy (5–25 keV) ¹³C⁺ ion implantation into diamond (100) to a fluence ranging from 10¹⁶ cm⁻² to 10¹⁸ cm⁻² was performed for the study of diamond growth via the approach of ion beam implantation. The samples were characterized with Rutherford backscattering/channelling spectroscopy, Raman spectroscopy, X-ray photoemission spectroscopy and Auger electron spectroscopy. Extended defects are formed in the cascade collision volume during bombardment at high temperatures. Carbon incorporation indeed induces a volume growth but the diamond (100) samples receiving a fluence of 4 × 10¹⁷ to 2 × 10¹⁸ at. cm⁻² (with a dose rate of 5 × 10¹⁵ at. cm⁻² s⁻¹ at 5 to 25 keV and 800 °C) showed no He-ion channelling. Common to these samples is that the top surface layer of a few nanometers has a substantial amount of graphite which can be removed by chemical etching. The rest of the grown layer is polycrystalline diamond with a very high density of extended defects.