A high precision temperature control system for CMOS integrated wide range resistive gas sensors

In this work we present an integrated interface for wide range resistive gas sensors able to heat the sensor resistance through a constant power heater block at 0°C–350°C operating temperatures. The proposed temperature control system is formed by a sensor heater (which fixes the sensor temperature at about 200°C), a R/f (or R/T) converter, which converts the resistive value into a period (or frequency), and can be able to reveal about 6 decades variation (from 10 KΩ up to 10 GΩ), and a digital subsystem that control the whole systems loop. This interface allows high sensibility and precision and performs good stability in temperature and power supply drift and low power characteristics so it can be used also in portable applications. Test measurements, performed on the fabricated chip, have shown an excellent agreement between theoretical expectations and simulation results. Giuseppe Ferri is an associate professor in Electronics at the Department of Electrical Engineering of L’ Aquila University, Ital. In 1993 he has been a visiting researcher at SGS-Thomson Milano, working in bipolar low-voltage op-amp design. In 1994-95 he has been visiting researcher at KU Leuven working in low-voltage CMOS design in the group of Prof. Sansen. His research activity is actually centred on the analog design of integrated circuits for portable applications (e.g., sensors and biomedicals) and circuit theory. He is co-author of a book entitled “Low Voltage, Low Power CMOS Current Conveyors”, Kluwer ed. (2003) and four text-books in Italian on Analogue Microelectronics (2005, 2006). Moreover, he is author and co-author of 74 papers on international and Italian journals and 123 talks at national and international conferences. Vincenzo Stornelli was born in Avezzano (AQ), Italy, on May 31, 1980. He received the Electronics Engineering degree (cum laude) in July 2004. In October 2004 he joined the Department of Electronic Engineering, University of L’Aquila, where he is actually involved with problems concerning project and design of integrated circuits for RF and sensor applications, CAD modelling, characterization, and design analysis of active microwave components, circuits, and subsystems. He regularly teaches courses of the European Computer patent and has regular collaborations with national corporations such as Thales Italia     

体育就是展现

如果我们要寻找体育建筑的基本元素，可能要承认广泛参与的理念是其最具启迪意义的。体育不是（或不再是）体能形式的神圣展示，而纯粹是能力与竞争精神的表达。不幸的是体育也成为被“造星体制”腐蚀的领域，作为一项大型的商业活动，体育原本纯洁的精神被掩盖和破坏。     

High-pressure synthesis of crystalline polyethylene using optical catalysis

Polymerization processes are probably the most relevant example of a chemical reaction activated by catalysts or radical initiators. Among polymers, polyethylene is by far the most common and largely produced. Here we present a high-pressure synthesis of high-density crystalline polyethylene by using only physical tools such as pressure and light. Low-density polyethylene is obtained by compressing ethylene at room temperature above 3 GPa in the ordered crystal phase, and a highly crystalline polymer is produced in the fluid phase at pressures lower than 1 GPa by using continuous-wave laser lines (lambda < or = 460 nm) as an optical catalyst. The photo-activation is based on a two-photon absorption process to pi* antibonding states, where the change in molecular geometry favours the polymeric chain formation. The high yield and crystallinity of the polymer recovered by the photoinduced reaction and the simplicity of the synthesis make this process appealing for large-scale applications.     

Aerosol lidar intercomparison in the framework of the EARLINET project. 1. Instruments

In the framework of the European Aerosol Research Lidar Network to Establish an Aerosol Climatology (EARLINET), 19 aerosol lidar systems from 11 European countries were compared. Aerosol extinction or backscatter coefficient profiles were measured by at least two systems for each comparison. Aerosol extinction coefficients were derived from Raman lidar measurements in the UV (351 or 355 nm), and aerosol backscatter profiles were calculated from pure elastic backscatter measurements at 351 or 355, 532, or 1064 nm. The results were compared for height ranges with high and low aerosol content. Some systems were additionally compared with sunphotometers and starphotometers. Predefined maximum deviations were used for quality control of the results. Lidar systems with results outside those limits could not meet the quality assurance criterion. The algorithms for deriving aerosol backscatter profiles from elastic lidar measurements were tested separately, and the results are described in Part 2 of this series of papers [Appl. Opt. 43, 977-989 (2004)]. In the end, all systems were quality assured, although some had to be modified to improve their performance. Typical deviations between aerosol backscatter profiles were 10% in the planetary boundary layer and 0.1 x 10(-6) m(-1) sr(-1) in the free troposphere.     

A Formal Model for Video Shot Segmentation and its Application via Animate Vision

The first step in a video indexing process is the segmentation of videos into meaningful parts called shots. In this paper we present a formal model of the video shot segmentation process. Starting from a mathematical characterization of the most common transition effects, a video segmentation algorithm capable to detect both abrupt and gradual transitions is proposed. The proposed algorithm is based on the computation of an arbitrary similarity measure between consecutive frames of a video. The algorithm has been tested adopting a similarity metric based on the Animate Vision theory and results have been reported.     

Ultrastable Liquid–Liquid Interface as Viable Route for Controlled Deposition of Biodegradable Polymer Nanocapsules

Liquid–liquid interfaces are highly dynamic and characterized by an elevated interfacial tension as compared to solid–liquid interfaces. Therefore, they are gaining an increasing interest as viable templates for ordered assembly of molecules and nanoparticles. However, liquid–liquid interfaces are more difficult to handle compared to solid–liquid interfaces; their intrinsic instability may affect the assembly process, especially in the case of multiple deposition. Indeed, some attempts have been made in the deposition of polymer multilayers at liquid–liquid interfaces, but with limited control over size and stability. This study reports on the preparation of an ultrastable liquid–liquid interface based on an O/W secondary miniemulsion and its possible use as a template for the self‐assembly of polymeric multilayer nanocapsules. Such polymer nanocapsules are made of entirely biodegradable materials, with highly controlled size—well under 200 nm—and multi‐compartment and multifunctional features enriching their field of application in drug delivery, as well as in other bionanotechnology fields.