低密度微泡沫压井液的研究与应用

吐哈油田部分区块地层压力系数小于0.9,常规水基压井液对储层伤害大,若使用油基压井液成本高,环境污染严重。通过实验优选出了一种低密度水基微泡沫压井液。该压井液具有密度低、泡沫强度高、稳定性好、携砂能力强等优点。现场应用表明,低密度微泡沫压井液稳定时间大于48 h,密度在0.70~0.99 g/cm3之间可调,抗油污染能力强,抗油大于8%,抗温在100℃以上,岩心污染后渗透率恢复值大于80%;并且施工方便,成本低,具有储层保护能力,使用微泡沫压井液的井表皮系数在0.20~2.34之间。     

用增量的累积量方法测量大气风场

为了在非平稳、非线性条件下能得到真实风场的良好估计,提出了一种用空间分布天线（SA）雷达信号的增量累积量测量大气风场参数的方法。该方法基于结构函数方法,利用高阶累计量在信息处理中的特性,用零延迟的增量累计量求解平均水平风速等具体参量，并在大气散射模型基础上对增量累积量方法进行了数值模拟,得出了同理论分析一致的结果.分析和计算表明,该方法完全适用于局地平稳条件，可以减小风场参量估计对天线间距的敏感度；阶数k≥3时,对高斯噪声有很强抑制;同时可以得到风场参量的高阶估计，这是普通的二阶方法（如全相关分析、全谱分析）不具备的。     

甲烷无氧芳构化研究进展及其工业应用前景

综述了最近20多年来甲烷无氧芳构化催化剂的制备、积炭失活和再生方面的研究进展，特别分析了催化剂再生过程的工程化问题及反应器型式；还根据甲烷芳构化技术产业化的需要，分析了甲烷芳构化技术的发展趋势。     

基于AFM的微结构加工实验研究

本文建立了微动工作台和原子力显微镜相结合的微加工系统，在该系统上采用金刚石针尖进行微加工实验，与SPI系统本身的刻划软件刻划出的图形进行了比较分析，得出这个系统适合微结构的加工；并给出了采用该方法加工的1111面及多边形面微结构；还分析了金刚石针尖几何角度及SPM和工作台的相关参数对加工的影响。     

石膏转化制硫酸钾结晶动力学及结晶添加剂研究

研究了浓氨介质中石膏与氯化钾直接转化制硫酸钾的结晶动力学及结晶添加剂的作用效果。结果表明 ,硫酸钾在氨介质中的成核速率与晶体生长速率、悬浮密度、搅拌速率存在如下关联式 :B0 =5 .64 13×10 8G3.32 0 8Mt0 .0 559np0 .2 92 8。加入异丙醇、OP乳化剂及十二烷基苯磺酸钠等添加剂 ,可使硫酸钾结晶产品纯度提高 ,晶体形态整齐均匀     

Mixed oxide supported hydrodesulfurization catalysts—a review

Support effects form important aspect of hydrodesulfurization (HDS) studies and mixed oxide supports received maximum attention in the last two decades. This review will focus attention on studies on mixed oxide supported Mo and W catalysts. For convenience of discussion, these are divided into Al₂O₃ containing mixed oxide supports, TiO₂ containing mixed oxide supports, ZrO₂ containing mixed oxide supports and other mixed oxide supports containing all the rest. TiO₂ containing mixed oxides received maximum attention, especially TiO₂–Al₂O₃ supported catalysts. A brief discussion about their prospects for application to ultradeep desulfurization is also included. An overview of the available literature with emphasis on research carried out in our laboratory form the contents of this publication.     

光学材料的激光微加工研究进展与应用前景

综述了国内外在光学材料激光微加工方面的研究成果和应用状况，并展望了其发展前景。     

线光栅扫描实现衍射图形的矢量化直写

在双光束激光直写系统中,衍射光变图像的光刻是逐像素点进行的.本文提出在该系统中采用狭缝获得光栅线来进行衍射图形的直写,利用一种改进的矢量文件格式,使平台沿着垂直光栅线的方向运动,获得连续的多光点同时直写,直写后的衍射光栅线是连续的,系统的运行效率是逐点光刻的几十倍.编写了与DXF文件的接口直写控制程序,给出了实验结果.     

Explosive chemistry: Simulating the chemistry of energetic materials at extreme conditions

In this article, we review recent atomistic computational techniques to study the electronic structure aspects and chemistry of energetic materials at high-pressure and/or high temperature. While several mechanisms have been proposed for the initial events of energetic materials at high-pressure, we explore the validity of a proposed shear-induced local metallization via molecular bond bending in the insensitive explosive TATB. We study the effect of high-stress (both uniform and uniaxial) on the electronic energy band-gap and the first chemical event of a prototypical energetic material, that of nitromethane. We also determine chemical reactions rate laws and decomposition mechanisms from a quantum-based molecular dynamics simulation of HMX, a widely used explosive material, at conditions of high density and temperature similar to that encounter under detonation. Finally, we review a new multi-scale computational tool recently developed to model the shock-induced chemistry of energetic materials at the atomistic level, and report its applicability to shocked solid nitromethane. This revised version was published online in June 2006 with corrections to the Cover Date.     

正确选择气顶油藏高效开发模式

通过对不同类型气顶油藏的油气水分布特征及气顶和边水能量的研究分析，计算水侵量与边水体积及合理的弹性产率。提出适合气顶油藏特点的开发模式是先开采油区后开采气顶，并以唐家河油田港深18—2断块为例，证明采用该模式可以高效开发气顶油藏。图3表1参6