智能化原油及可燃气体泄漏监控系统

原有的可燃气体检测报警仪在技术上无法准确监控现场可能发生的原油或可燃气体的泄漏。为了保证油库的安全生产和科学管理，开发并应用适合油库的原油及可燃气体泄漏监控系统，具有重要意义。文章介绍了如何根据实际需要，应用工业控制计算机和仪表技术，开发智能化原油(可燃液体)及可燃气体泄漏监控系统。该监控系统已推广应用于大型油库及其它石化生产企业。实际应用证明，系统对各种可燃气体及液体泄漏均有很好的监控作用。     

浅谈项目的形象包装

对房地产项目的样板房包装、售楼部包装及包装应注意的问题进行了论述,同时介绍了楼盘包装的内容及具体的包装策略,并指出楼盘的销售推广是房地产项目开发后期的关键环节,其成效直接影响到投资项目的市场价值实现.     

Effect of fluoropolymer antidripping agent on the microstructure and properties of polyesters

Poly(ethylene terephthalate) (PET) is of excellent mechanical properties and melt processability and is widely used as raw material for textile fibers. However, the flame retardant properties of PET were rather poor, and both reactive and additive phosphorus- and halogen-containing compounds have been employed to enhance the reaction-to-fire properties while the meltdripping behaviour during burning hasn’t been handled properly with the flame retardants. In this work, fluoropolymer was blended with both pure PET (pPET) and reactive phosphorus-containing flame retarded copolyester (fPET), and the flame retardance and char formation and mechanical properties of the resulted pPET and fPET blends were investigated. The tensile strengths of modified pPET samples were worsen whereas those of modified fPET samples were improved at low concentrations. The initial thermal degradation in nitrogen was accelerated remarkably for the two polyesters with fluoropolymer. The oxygen indices of the all modified samples were reduced while char formation and meltdripping suppression were encouraged. The apparent melt viscosity and elasticity for the two polyesters were gained much with antidripping agent. Therefore, fluoropolymer improved char formation of the two polyesters based on the gaseous phase mechanism while the partial suppression of meltdripping behavior and the decrease of mechanical properties mainly originated from the increase of melt viscosity via fibrillation for pPET.     

太阳电池板结构应力-应变状态分析

多层胶接是太阳电池板的结构特点,由于不同材料的弹性模量、热膨胀系数和泊松比不同,在温度场 作用下会产生热应力应变,在多次热交变过程中热应力．应变累积最后导致结构层间剥离,因此研究温度场作用 下太阳电池板结构应力应变状态具有非常重要的实际意义。本文推导了模拟太阳电池板结构应力-应变状态的一 维模型,该模型同样适用于分析多层胶接结构应力应变状态。     

油田热采注汽管道在线检测技术现状

稠油热采注汽管道由于长期在高温、高压下运行,极易发生各种损伤,如腐蚀、裂纹、材料退化等,极易造成管道承压能力降低,发生失效事故。如何检测出潜在危险性缺陷,判断注汽管道能否继续使用,是保证注汽管道安全运行的关键问题。探讨了高温压力管道在线检测技术发展现状及其应用范围。     

ARCGIS环境下基于DEM的流域特征提取

研究选取位于陕西省延安城南12 km处的万花乡向阳沟小流域。采用1∶10000大比例尺的比例尺5 m分辨率的DEM作为基本的地形数据,应用ESR I公司开发的ARCG IS地理信息系统软件进行流域特征的提取。经分析得到了研究区域河网特征以及研究区其它常用的流域特征信息,与实际河流水系特征基本吻合,认为应用DEM划分的流域结果是合理的。     

后浇带质量控制的措施

后浇带起着超长建筑的温度伸缩、高层建筑高层部分与裙房间沉降缝的作用,已普遍采用,但有些工程由于施工不当,设了后浇带起不到应有作用,本文就施工中如何采取有效措施,对后浇带的质量进行控制,作了探讨,以期能真正发挥后浇带的作用。     

秦皇岛发电有限责任公司年产2.5亿块粉煤灰烧结砖生产线项目工艺设计特点

1 项目建设的目的 秦皇岛发电有限责任公司原名秦皇岛热电厂,目前是一座装机容量100万千瓦的国有大型火力发电企业,年发电量68亿kWh.由于三期工程正在筹建,拟建2×30万kW供热发电机组.为了合理地利用三期工程排放的粉煤灰,不再新建储灰场污染环境,秦皇岛发电有限责任公司经过国内外详细考察,反复论证,认为最有效的大量利用途径之一是用其烧制粉煤灰烧结砖这种新型墙体材料.考虑到国内设备生产能力及粉煤灰掺量难以满足要求,因此,决定引进具有国际先进水平的设备.通过更换模具和改变原料配比,能生产高档清水砖、空心砖、不同规格与不同孔洞率的保温、承重与非承重砌块.     

Swelling behavior induced by alteration in granite and its implications on underground excavation

Granite is commonly recognized as an ideal medium for underground construction. However, in the site investigation for Heimifeng Pumped Storage Power Station project, it was found that there are swelling behaviors induced by alteration in granite and eventually causing slaking and disintegration of rock blocks. The study shows that hydrothermal alteration in granite is primarily due to the intrusion of multi-phase igneous magma. The clay minerals, such as montmorillonite, chlorite, kaolinite, are the main causes for the swelling behavior of granite. In the exploratory adits, alteration was observed to occur mainly along faults or fractures in the rock masses and resulted in roof caving if water is present. Some of the highly altered borehole cores swell and crack within 24 h in water and eventually disintegrate completely. From the testing results on the samples, the maximum axial free swelling strain is about 1.2%, while the maximum axial confined swelling strain is around 0.1% with swelling stress less than 25 kPa. Under free swelling tests, 80% of swelling is completed within 24 hours. Under confined swelling condition, swelling process is completed within 1 h for some samples, with 80% of maximum swelling strain finished within around 22 h for most of the samples. Contraction of samples occurs after swelling completed. The strength of granite, reflected by deformation and elastic moduli, shear strength, decreases due to alteration. The deformation and elastic moduli are even lower compared to highly weathered rock. The shear strength is between that for highly weathered and slightly weathered rocks. The swelling characteristics of the altered rock present great challenges for support or lining during construction and operation stages. Support or lining shall be in place immediately after excavation. Since the rock may swell when encountering water, the shotcrete shall be designed accordingly. During the construction of access tunnel and caverns, water shall be drained in time. Drainage directly from surface shall be avoided so as to prevent floor heave.     

hiX 5300在洪江的应用

介绍了西门子hiX5300的结构和性能。分析了hiX5300在洪江电信局的应用及故障处理情况。