Predicting the spontaneous termination of atrial fibrillation based on poincare section in the electrocardiogram phase space

Atrial fibrillation (AF) is a commonly encountered cardiac arrhythmia. Predicting the conditions under which AF terminates spontaneously is an important task that would bring great benefit to both patients and clinicians. In this study, a new method was proposed to predict spontaneous AF termination by employing the points of section (POS) coordinates along a Poincare section in the electrocardiogram (ECG) phase space. The AF Termination Database provided by PhysioNet for the Computers in Cardiology Challenge 2004 was applied in the present study. It includes one training dataset and two testing datasets, A and B. The present investigation was initiated by producing a two-dimensional reconstructed phase space (RPS) of the ECG. Then, a Poincare line was drawn in a direction that included the maximum point distribution in the RPS and also passed through the origin of the RPS coordinate system. Afterward, the coordinates of the RPS trajectory intersections with this Poincare line were extracted to capture the local behavior related to the arrhythmia under investigation. The POS corresponding to atrial activity were selected with regard to the fact that similar ECG morphologies such as P waves, which are corresponding to atrial activity, distribute in a specific region of the RPS. Thirteen features were extracted from the selected intersection points to quantify their distributions. To select the best feature subset, a genetic algorithm (GA), in combination with a support vector machine (SVM), was applied to the training dataset. Based on the selected features and trained SVM, the performance of the proposed method was evaluated using the testing datasets. The results showed that 86.67% of dataset A and 80% of dataset B were correctly classified. This classification accuracy is in the same range as or higher than that of recent studies in this area. These results show that the proposed method, in which no complicated QRST cancelation algorithm was used, has the potential to predict AF termination.     

Gas leak locating in steel pipe using wavelet transform and cross-correlation method

Pipelines leakage in power plant, petrochemical complexes, and refineries can lead to explosion, pollution, and severe physical damages, so precise and on time leak locating is very important. There are many techniques for detecting and locating the leakage. In this research, we represent the leak locating principle in pressurized gas pipelines by using acoustic emission theory. An algorithm for finding the location of continuous acoustic waves resulted from leakage is provided by MATLAB software. The used leak locating technique is a combination of wavelet transform, filtering, and cross-correlation methods. The resulted acoustic emission signals were analyzed into high and low frequencies by wavelet transform and available noises on them were omitted completely by filtering. Then de-noised acoustic emission signals were reconstructed. Time differences of de-noised waves were calculated precisely by using cross-correlation function. For studying the accuracy of used method, acoustic emission testing was done by continuous leakage source. The resulted signals of leakage were recorded by two acoustic sensors in two sides of leakage source, and time difference and leak location were calculated by using the algorithm. Several tests were done by changing sensor distance from leakage source and error percent of less than 3 % was resulted in leak locating that indicated high precision of used algorithm.     

Pipe damper,Part I: Experimental and analytical study

In this paper the behavior of steel pipes, filled and unfilled with concrete, is studied under cyclic shear to examine the possibility of their use as a seismic damper. Two specimens of steel pipes filled inside with concrete are tested under monotonic and cyclic shear. Four other specimens of bare steel pipes are tested under fully reversed cyclic shear loading. The results show that the bare steel pipes are capable of absorbing a great amount of energy under a severe cyclic shear loading with a stable hysteretic behavior. This behavior is also simulated using the finite element method. Then, parametric studies are performed to investigate the effects of variations in geometrical properties of the pipe on its hysteretic behavior. A simplified bi-linear model is proposed to approximate the hysteretic behavior of the steel pipe as a metallic-yielding damper.     

Transforming Hand Drawn Wireframes into Front-End Code with Deep Learning

The way towards generating a website front end involves a designer settling on an idea for what kind of layout they want the website to have, then proceeding to plan and implement each aspect one by one until they have converted what they initially laid out into its Html front end form, this process can take a considerable time, especially considering the first draft of the design is traditionally never the final one. This process can take up a large amount of resource real estate, and as we have laid out in this paper, by using a Model consisting of various Neural Networks trained on a custom dataset. It can be automated into assisting designers, allowing them to focus on the other more complicated parts of the system they are designing by quickly generating what would rather be straightforward busywork. Over the past 20 years, the boom in how much the internet is used and the sheer volume of pages on it demands a high level of work and time to create them. For the efficiency of the process, we proposed a multi-model-based architecture on image captioning, consisting of Convolutional neural network (CNN) and Long short-term memory (LSTM) models. Our proposed approach trained on our custom-made database can be automated into assisting designers, allowing them to focus on the other more complicated part of the system. We trained our model in several batches over a custom-made dataset consisting of over 6300 files and were finally able to achieve a Bilingual Evaluation Understudy (BLEU) score for a batch of 50 hand-drawn images at 87.86%     

Tensile behaviour of anchored blind bolts in concrete filled square hollow sections

In this paper, the tensile behaviour of a new type of blind bolt, the anchored blind bolt, has been studied. This type of bolt consists of a conventional blind bolt with a headed stud extension that anchors it into the infill concrete. It has been developed for use in moment-resisting connections between I-beams and concrete-filled hollow section columns. The behaviour of these connections is highly dependent on the tensile behaviour of the anchored blind bolts. Hence, the fundamental mechanics of this behaviour has been studied here, both experimentally and in simulations using FE models. The complex interactions between the headed stud anchorage, the concrete infill, and the steel tube have been examined in detail. The experimental and numerical findings were used to understand the influence of important parameters in the tensile behaviour of the anchored blind bolts. It was found that the location of the bolt with respect to the side walls of the tube had a substantial influence on the behaviour of the anchored blind bolts. All the bolts located close to the side walls of the square hollow sections reached the ultimate tensile capacity of the equivalent structural bolts. This was due to the development of a concrete strut which transferred the load to the corner of the steel section. The bolt diameter also had a significant influence on the stiffness and strength of the anchored blind bolts.     

A new method to determine the synergistic effects of area ratio and microstructure on the galvanic corrosion of LAS A508/309 L/308 L SS dissimilar metals weld

The synergistic effects of area ratio and microstructure on the galvanic corrosion of A508/309 L/308 L dissimilar metals weld(DMW)are studied by a multi-analytical approach.It was demonstrated that decreasing the anode/cathode surface area ratio obviously enhances the corrosion rate of A508,both locally and globally.Deeper analyses of the AFM results enabled quantitative comparison of the corrosion behaviour of the different surface constituents.It was revealed that in the galvanic interaction of the DMW,the grain refined region corrodes most,followed by the partial grain refined region and base metal matrix of the A508,respectively.The electrochemical localization index(LI)estimation method and AFM analysis both confirmed the presence of a mixed(localized and uniform)corrosion phenomenon occurring on the surface of the A508 anode metal in the galvanic interaction of the dissimilar metals.Finally,the degree of synergism equation was utilized to describe the synergistic effects of anode/cathode area ratio and the microstructure of the samples on the galvanic corrosion of LAS A508/309L/308L SS DMW.     

Comparison of alteplase (tissue plasminogen activator) high‐dose vs. low‐dose protocol in restoring hemodialysis catheter function: The ALTE‐DOSE study

Hemodialysis catheter (HDC) dysfunction due to thrombosis is common, and dysfunction incidence can reach up to 50% within 1 year of use. Although administration of intraluminal alteplase (tissue plasminogen activator [tPA]) is the standard of practice to pharmacologically restore HDC function, there are no evidence‐based guidelines concerning the optimal tPA dose. The purpose of this study was to compare the efficacy of 1.0‐mg vs. 2.0‐mg tPA dwell protocols in restoring the HDC function in thrombotic dysfunctional catheters. A retrospective, single‐center study was conducted on two independent cohorts of patients; the first (n = 129) received 2.0 mg tPA/catheter lumen, while the second (n = 108) received 1.0 mg tPA/catheter lumen. Kaplan–Meier and Cox regression analyses were performed to compare the catheter survival time between patients who received 1.0 mg tPA and those who received 2.0 mg tPA. Catheter removal occurred in 25 (19.4%) of those catheters treated with 1.0 mg tPA compared with 11 (10.2%) of catheters treated with 2.0 mg tPA (P = 0.05). The hazard ratio (HR) for catheter removal was 2.75 (95% confidence interval [^95%CI] = 1.25–6.04) for the 1.0‐mg tPA cohort compared with the 2.0‐mg tPA cohort. Correction added on 3 December 2012, after first online publication: The tPA cohort values were changed. Female gender (HR = 2.51; ^95%CI = 1.20–5.27) and age (HR = 0.96; ^95%CI = 0.94–0.98) were also associated with catheter survival. Our findings suggest that treatment of dysfunctional HDC with 2.0‐mg tPA dwells is superior to 1.0‐mg tPA dwells.     

A three-stage model for closed-loop supply chain configuration under uncertainty

In this paper, a general closed-loop supply chain (CLSC) network is configured which consists of multiple customers, parts, products, suppliers, remanufacturing subcontractors, and refurbishing sites. We propose a three-stage model including evaluation, network configuration, and selection and order allocation. In the first stage, suppliers, remanufacturing subcontractors, and refurbishing sites are evaluated based on a new quality function deployment (QFD) model. The proposed QFD model determines the relationship between customer requirements, part requirements, and process requirements. In addition, the fuzzy sets theory is utilised to overcome the uncertainty in the decision-making process. In the second stage, the closed-loop supply chain network is configured by a stochastic mixed-integer nonlinear programming model. It is supposed that demand is an uncertain parameter. Finally in the third stage, suppliers, remanufacturing subcontractors, and refurbishing sites are selected and order allocation is determined. To this end, a multi-objective mixed-integer linear programming model is presented. An illustrative example is conducted to show the process. The main novel innovation of the proposed model is to consider the CLSC network configuration and selection process simultaneously, under uncertain demand and in an uncertain decision-making environment.