熔融织构YBCO块样品的磁特性研究

对MTG区熔生长法,慢冷法,粉末熔融生长法这3种方法制备的熔融织构YBCO块样品进行了交流磁化率和磁阻的测量。根据实验结果计算了样品的钉扎势,并且发现3种方法制备的样品在150 mT外磁场下均显示出基本消除弱连接的特性;粉末融熔生长法所制样品中有较纯净123相和较好织构,质量最好。     

Nanoscale Studies of the Early Stages of Oxidation of a TiAl-Base Alloy

The strategy to perform nanoscale studies of the initial stages of oxidation of TiAl involved first gaining some information on the electronic structure of pure TiO₂ surfaces and then on TiAl surfaces before and after oxidation both in low- and high-oxygen potentials. Both materials were studied in atomically-cleaned states generated by repeated sputtering and heating. It was found that the oxygen vacancies created additional defect states in the band gap of stoichiometric TiO₂. The results obtained on TiO₂ were used as fingerprints to study the oxide nucleation. The results on the initial stages of oxidation of TiAl confirm the nucleation of Ti₂O₃ islands of nanometer size and monolayer height in a low-oxygen-pressure environment, whilst a TiO₂ layer developed in an atmospheric environment. The ledges on atomically-cleaned surfaces usually acted as nucleation sites.     

An investigation of ultrasonic-assisted electrical discharge machining in gas

This study focuses on using ultrasonic to improve the efficiency in electrical discharge machining (EDM) in gas medium. The new method is referred to as ultrasonic-assisted electrical discharge machining (UEDM). In the process of UEDM in gas, the tool electrode is a thin-walled pipe, the high-pressure gas medium is applied from inside, and the ultrasonic actuation is applied onto the workpiece. In our experiment, the workpiece material is AISI 1045 steel and the electrode material is copper. The experiment results indicate that (a) the Material Removal Rate (MRR) is increased with respect to the increase of the open voltage, the pulse duration, the amplitude of ultrasonic actuation, the discharge current, and the decrease of the wall thickness of electrode pipe; and (b) the surface roughness is increased with respect to the increase of the open voltage, the pulse duration, and the discharge current. Based on experimental results, a theoretical model to estimate the MRR and the surface roughness is developed.     

CdZnTe Crystal Growth by Vertical Gradient Freezing Method

ＣｄＺｎＴｅＣｒｙｓｔａｌＧｒｏｗｔｈｂｙＶｅｒｔｉｃａｌＧｒａｄｉｅｎｔＦｒｅｅｚｉｎｇＭｅｔｈｏｄＨｏｕＱｉｎｇｒｕｎ；ＷａｎｇＪｉｎｙｉ；ＤｅｎｇＪｉｎｃｈｅｎｇ；ＤｕＢｉｎｇ，（侯清润）（王金义）（邓金诚）（杜冰）；ＬｉＭｅｉｒｏｎｇａｎｄＣ...     

RTM工艺中气泡形成及消除研究

总结了关于RTM（树脂压铸）工艺中气泡缺陷的文献报道，对RTM中气泡缺陷的形成机理、影响因素及各研究者提出的消泡方法、理论和模型进行了概述，同时对RTM工艺中气泡缺陷的研究现状给予充分关注，并对RTM缺陷研究的未来方向进行了展望。     

纳米层状双金属氢氧化物的制备及结构表征

采用恒定pH 12±0.2,按n(Mg2+)∶n(Al3+)∶n(OH-)∶n(CO2-3)=6∶2∶16∶1配制溶液,采用一步反应液相法,制备纳米层状双金属氢氧化物(LDH)粉体.为了获得无团聚、分散均匀的纳米粉体,探讨了溶剂置换干燥、真空干燥、常压干燥对纳米LDH粉体形成团聚的影响;用X射线衍射仪、透射电镜、红外光谱仪和元素分析仪对样品的物相、形貌、粒径和组成进行了表征.结果表明,溶剂置换干燥能够有效防止纳米粉体形成硬团聚,样品分散性好,呈针状形态,长50 nm,宽5 nm.     

透明聚烯烃用成核剂合成的研究

介绍了聚烯烃成核剂合成反应所用助剂选择,反应条件的确立,利用均匀设计实现最佳配比实验,对不同侧基苯甲醛缩合反应进行了研究。     

Security-aware intermediate data placement strategy in scientific cloud workflows

Massive computation power and storage capacity of cloud computing systems allow scientists to deploy data-intensive applications without the infrastructure investment, where large application datasets can be stored in the cloud. Based on the pay-as-you-go model, data placement strategies have been developed to cost-effectively store large volumes of generated datasets in the scientific cloud workflows. As promising as it is, this paradigm also introduces many new challenges for data security when the users outsource sensitive data for sharing on the cloud servers, which are not within the same trusted domain as the data owners. This challenge is further complicated by the security constraints on the potential sensitive data for the scientific workflows in the cloud. To effectively address this problem, we propose a security-aware intermediate data placement strategy. First, we build a security overhead model to reasonably measure the security overheads incurred by the sensitive data. Second, we develop a data placement strategy to dynamically place the intermediate data for the scientific workflows. Finally, our experimental results show that our strategy can effectively improve the intermediate data security while ensuring the data transfer time during the execution of scientific workflows.     

3－甲基－4－甲硫基苯酚的气相色谱分析

采用ＸＥ－６０为固定液，磷酸三丁酯为内标物，气相色谱法测定３－甲基－４－甲硫基苯酚的含量，具有简便、快速、准确度高等优点。方法的平均回收率为１００．２％，标准偏差为０．１７％。     

绿色水处理剂氢氧化镁应用的研究进展

氢氧化镁(氧化镁)被称为绿色安全的废水处理剂,本文评述了氢氧化镁在环境保护方面的研究与应用进展,包括工业废水中铅、铬、镍等重金属离子的去除和酸性废水的中和处理,并列举了氢氧化镁对一些实际废水的良好处理效果,包括其对一些特殊废水如含硼废水和放射性废水的处理效果,最后展望了其在生产和应用方面的发展前景。