Optimal Performance in Tracking Stochastic Signal Under Disturbance Rejection

The analysis method of optimal tracking performance is proposed for multiple‐input multiple‐output (MIMO) linear time‐invariant (LTI) systems under disturbance rejection. An H₂ criterion of the error signal between the output of the plant and the reference signal is used as a measure for the tracking performance. Spectral factorization is applied to obtain the optimal solution of the system tracking error. The explicit expressions are derived for this minimal tracking error with respect to random reference signals under disturbance rejection. It is shown that the nonminimum phase zeros, the zero direction, the unstable poles, the pole direction of a given plant, statistical characteristics of the reference input signal, and disturbance signal have a negative effect on a feedback system's ability to reduce the system error with disturbance rejection. The results show that the optimal tracking performance will further be damaged because of disturbance rejection. Some typical examples are given to illustrate the theoretical results.     

Oxidation Behavior of a Single-Crystal Ni-Base Superalloy in Air—II: At 1000, 1100, and 1150°C

The oxidation behavior of a single-crystal (SC) Ni-base superalloy was studied over the temperature range from 1000–1150°C and analysed by TGA, XRD, EDAX, and SEM. The results indicated that the SC Ni-base superalloy exhibited parabolic oxidation kinetics, which were controlled by the growth of the inner -Al₂O₃ layer. A mixed scale formed on the SC Ni-base superalloy after prolonged oxidation. The scale consisted of an outer layer of spinel, a sublayer of mainly -Al₂O₃ with small amount of spinel adjoined by a very thin and even discontinuous layer of CrTaO₄-rich oxide, and an inner -Al₂O₃ layer. The inner -Al₂O₃ layer provided good protection. No internal oxides or nitrides were observed below the inner -Al₂O₃ layer after 1000 hr at 1000°C, and after 200 hr at 1100 and 1150°C.     

A perceptual evaluation of grating frequencies and velocities in the analysis of dynamic images

Dynamic images that possess beauty and are user-friendly can increase the use of digital technology. In addition to information conveyance, dynamic images also act as a communication bridge in the human–machine interface. Dynamic images are widely used in the application of digital media. Therefore, understanding the visual effects of dynamic images on viewers is a very important issue. From a visual communication design perspective, dynamic images influence not only image quality, but also the viewers’ perception and impression of the displayed image. In the contemporary age characterized by universal usage of dynamic images, designers should attain synchronized knowledge and understanding of relevant media technology so as to present preferred design quality in the management of digital design such as animation design, Web page design, multimedia design, and so on. The current study noted that psychological effects such as viewers’ visual attention, preferences, and understanding were more important than image quality. Therefore, this study adopted the viewpoint of “visual design” and conducted a perceptual evaluation of grating frequency and grating velocity. The pair-comparison method and scale method were adopted in the research methodology to simplify perceptual evaluations and enhance their validity. The purpose of this study was: (1) To propose recommendations for displaying dynamic images and improving image performance using perceptual evaluation methods. (2) To examine the influence of psychological factors on viewer’s comfort when they experience dynamic images. (3) To identify the best grating feature combinations that meet viewer’s psychological characteristics and propose recommendations for dynamic images design. The study concludes that it is useful to establish criteria for evaluating users’ perception and to, develop perceptual evaluations of dynamic images. It is recommended that designers find a balance between watching a moving imaging display “clearly” and watching it “comfortably” for successful reception by the viewer.     

Development of polarization ratio model for sea surface wind field retrieval from TerraSAR-X HH polarization data

In this article, the polarization ratio (PR) of TerraSAR-X (TS-X) vertical–vertical (VV) and horizontal–horizontal (HH) polarization data acquired over the ocean is investigated. Similar to the PR of C-band synthetic aperture radar (SAR), the PR of X-band SAR data also shows significant dependence on incidence angle. The normalized radar cross-section (NRCS) in VV polarization data is generally larger than that in HH polarization for incidence angles above 23°. Based on the analysis, two PR models proposed for C-band SAR were retuned using TS-X dual-polarization data. A new PR model, called X-PR hereafter, is proposed as well to convert the NRCS of TS-X in HH polarization to that in VV polarization. By using the developed geophysical model functions of XMOD1 and XMOD2 and the tuned PR models, the sea surface field is retrieved from the TS-X data in HH polarization. The comparisons with in situ buoy measurements show that the combination of XMOD2 and X-PR models yields a good retrieval with a root mean square error (RMSE) of 2.03 m s^–1 and scatter index (SI) of 22.4%. A further comparison with a high-resolution analysis wind model in the North Sea is also presented, which shows better agreement with RMSE of 1.76 m s^–1 and SI of 20.3%. We also find that the difference between the fitting of the X-PR model and the PR derived from TS-X dual-polarization data is close to a constant. By adding the constant to the X-PR model, the accuracy of HH polarization sea surface wind speed is further improved with the bias reduced by 0.3 m s^–1. A case acquired at the offshore wind farm in the East China Sea further demonstrates that the improvement tends to be more effective for incidence angles above 40°.     

尿基复合肥生产技术的改进

通过分析尿基复合肥生产过程中出现的问题，并相应提出技术改进措施，优化操作，对复合肥产量的提高和产品质量的控制都取得了明显的效果。     

Direct synthesis of electrorheological suspension containing salt of poly(methacrylic acid) and its electrorheological effect

Colloidal suspensions containing salts of poly(methacrylic acid) which exhibit high electrorheological (ER) activity were synthesized by inverse emulsion polymerization. Factors influencing the ER effect were studied. The results showed that maximum yield stress occurred at optimum amounts of both polymeric stabilizer and crosslinking agent used in the inverse emulsion polymerization as well as a certain water content of the particles, while yield stress increased with electric field strength, average diameter of the particles below 0.9 μm, or the molar ratio of the salt to the acid. The ER activity for the suspensions containing different monovalent counter ions decreased in the following order: Li⁺ > Na⁺ > K⁺ > NH₄⁺. The phenomena were discussed with the ionic polarization mechanism. © 1995 John Wiley & Sons, Inc.     

基于高精度流线生成的交互流场可视化

高效准确的流线绘制一直是流场可视化的重要研究内容,流线可以对流场的重要特征进行有效的稀疏表示,但流线需要长期的粒子追踪过程及大量的积分计算,在面向大规模流场可视化时时间效率较低,需要高性能计算设备进行辅助计算.本文通过设计一种基于深度学习的高精度流线生成算法,将初始的低精度流线快速映射为稠密的高精度流线,可以在较短的时间内快速生成可靠的流线可视化结果,并在此基础上设计了交互式实时流场可视化系统,涵盖了流场的特征检测,属性关联分析,信息论分析等,帮助用户快速了解流场数据,找到自己感兴趣的区域进行后续进一步深度分析,避免了获取过多冗余数据,同时优化了分析工作的效率,满足用户对于流场结构,特征属性等多维度进行关联分析的需求.     

基于多季相Sentinel-2影像的白洋淀湿地信息提取

白洋淀湿地是华北平原上重要的浅水湖泊湿地,对雄安新区绿色发展具有重要的生态价值。对白洋淀高度异质化的景观格局进行分类,能够为白洋淀湿地资源的遥感监测提供指导意义。针对湿地季节变化的特点,对白洋淀每个季节选取一期具有代表性的Sentinel-2影像,采用分类与回归树（CART）、支持向量机（SVM）、随机森林（RF）3种常用的机器学习分类器对15种季相组合实验方案进行分类,分析不同季相遥感影像及其组合对白洋淀湿地信息提取的优劣。结果表明：相较于使用单一季相影像分类,多季相影像的组合能够显著提高分类精度,春&夏季相组合能够得到最优的分类效果,相对单季影像总体分类精度提高了10.9%~25.5%,Kappa系数提高了0.09~0.29;SVM分类器的分类表现较为稳定,能够得到最高的平均分类精度,CART分类器在处理高维特征的能力不如随机森林和SVM;不同特征类型对湿地信息提取的贡献度从高到底依次是红边光谱特征、传统光谱特征、缨帽变换特征、主成分分析特征、纹理特征。实验成果能为湿地信息的遥感识别提供依据。     

基于表面反应和扩散迁移控制的灰岩单裂隙渗流—溶解模型及其数值模拟

针对碳酸盐类可溶岩地区水电站坝址流场、化学场以及固相介质属性等随时间发生改变,从而对工程安全运行造成不利影响等问题,研究了灰岩地区地下水运移过程中各物理场间的相互作用,分析了影响灰岩溶解速率的两个因素,即表面反应控制和扩散迁移控制。在此基础上,建立了单裂隙中的渗流—溶解耦合模型,并进行数值求解。模拟结果表明,在垂直裂隙延伸方向,其溶蚀锋面为非齐整平面,而是呈似“虫洞”状非均一变化,而沿裂隙延伸方向即自上游侧向下游方向溶蚀程度逐渐减轻;而通过裂隙的流量呈现随时间逐渐增大的趋势,但变幅不大;根据流量求得的等效水力隙宽,其增幅和增长速率均小于实际平均隙宽;同时,化学场中Ca2+浓度的分布与裂隙开度变化具有相似性,不同时刻下上游侧反应速率R均大于下游侧。就反应机制而言,在初期均受表面反应控制,而随反应进行,位于上游补给区部位转为受扩散迁移控制,但在下游位置仍受表面反应控制。     

Differences in electrochemical corrosion behaviours between selective laser melted and wrought Ti6Al4V alloys in acid fluoride-containing artificial saliva

Journal of Applied Electrochemistry - In this work, the electrochemical corrosion behaviours of selective laser melted (SLMed) and wrought Ti6Al4V alloys in acid fluoride-containing artificial...