Large-scale mapping of boreal forest in SIBERIA using ERS tandem coherence and JERS backscatter data

Siberia's boreal forests represent an economically and ecologically precious resource, a significant part of which is not monitored on a regular basis. Synthetic aperture radars (SARs), with their sensitivity to forest biomass, offer mapping capabilities that could provide valuable up-to-date information, for example about fire damage or logging activity. The European Commission SIBERIA project had the aim of mapping an area of approximately 1 million km² in Siberia using SAR data from two satellite sources: the tandem mission of the European Remote Sensing Satellites ERS-1/2 and the Japanese Earth Resource Satellite JERS-1. Mosaics of ERS tandem interferometric coherence and JERS backscattering coefficient show the wealth of information contained in these data but they also show large differences in radar response between neighbouring images. To create one homogeneous forest map, adaptive methods which are able to account for brightness changes due to environmental effects were required. In this paper an adaptive empirical model to determine growing stock volume classes using the ERS tandem coherence and the JERS backscatter data is described. For growing stock volume classes up to 80 m³/ha, accuracies of over 80% are achieved for over a hundred ERS frames at a spatial resolution of 50 m.     

Analysis of numerical methods for the simulation of deformable models

Simulating deformable objects based on physical laws has become the most popular technique for modeling textiles, skin, or volumetric soft objects like human tissue. The physical model leads to an ordinary differential equation. Recently, several approaches to fast algorithms have been proposed.In this work, more profound numerical background about numerical stiffness is provided. Stiff equations impose stability restrictions on a numerical integrator. Some one-step and multistep methods with adequate stability properties are presented. For an efficient implementation, the inexact Newton method is discussed. Applications to 2D and 3D elasticity problems show that the discussed methods are faster and give higher-quality solutions than the commonly used linearized Euler method.     

Coordination in networks: An economic equilibrium analysis

Networks utilizing modern communication technologies can offer competitive advantages to those using them wisely. But due to the existence of network effects, planning and operating cooperation networks is difficult. In this paper, the strategic situation of individual agents deciding on network participation is analysed. A systematic equilibrium analysis using computer-based simulations reveals principal solution scenarios for network agents and shows that network cooperation problems might frequently be not as difficult to resolve as often feared. In particular, strategic situations are identified showing that a majority of individuals might be better off getting the optimal solution from a central principal and that in many cases simple information intermediation can solve the start-up problem notorious in network economics.     

Electrodiffusion Model Simulation of Ionic Channels: 1D Simulations

The drift-diffusion (Poisson-Nernst-Planck) model is applied to ionic channels in biological membranes plus surrounding solution baths. Simulations of the K channel in KCl solutions using the TRBDF2 method are presented which show significant boundary layers at the ends of the channel. The computed current-voltage curve for the K channel shows excellent agreement with experimental measurements.     

The Attentional Dynamics of Masked Detection.

A dichoptic masking procedure was used to test whether the mask-dependent cuing effects found in luminance detection by P. L. Smith (2000a) were due to integration masking or interruption masking. Attentional cuing enhanced detection sensitivity (d') when stimuli were backwardly masked with either dichoptic or monoptic masks, whereas no cuing effect was found with unmasked stimuli, implying the mask dependencies were due to interruption of stimulus processing in visual cortex by the mask. The effect is predicted by a gated diffusion process model in which masks interrupt stimulus processing and attention controls the flow of information to a sequential-sampling decision mechanism. The model correctly predicts different patterns of performance for detection and discrimination and cuing effects in simple reaction time. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Influence of Powder Morphology and Chemical Composition on Metallic Foams produced by SlipReactionFoamSintering (SRFS)‐ Process

The SlipReactionFoamSintering (SRFS)‐ process is a metallurgical method to produce open‐cell metallic foams of iron based materials, steels and nickel based materials. In this process several chemical reactions take place. Through the most influential parameter, the morphology of the metallic powder, different properties of the foam can be adjusted, such as the viscosity of the slip, the cell structure and the mechanical properties. Several examples are presented in this paper. Moreover, the thermal conductivity of three foams is measured with the transient‐heat‐source‐technique.     

The Influence of Rapid Annealing Cycles on the Recrystallisation Behaviour of Cold Rolled Ultra Low Carbon and Low Carbon Steel

For ultra low carbon (ULC) and low carbon steel (LC), the influence of heating rate, annealing temperature, and holding time on the recrystallisation behaviour and the resulting grain size was investigated. For ULC smallest grain sizes of about 9 μm were obtained at the lowest heating rate whereas for LC significant smaller grain sizes of about 5 μm were determined at the highest heating rate. Furthermore, the evolution of the grain size distribution with varying heating rate, annealing temperature, and holding time was studied in dependence of the rolling and normal direction. The state of the as‐hot rolled microstructure as well as the precipitation state exert a strong influence on the development of the recrystallised microstructure along the different directions for both steel grades. The inherent prolonged microstructure due to the cold rolling process is still obvious just after recrystallisation. With ongoing annealing and grain growth, the aspect ratio approaches the equiaxed state. This change proceeds faster for the ULC steel grade. With increasing annealing temperature, the bimodal character of the grain size distribution disappears and the distribution becomes more homogeneous.     

Charging effect in electron-irradiated ice

To maintain the original distribution pattern of diffusible elements in biological samples, electron probe microanalysis is carried out with frozen hydrated bulk specimens and cryosections, analysed at temperatures below 130 K. Ice has a very low intrinsic conductivity at this working temperature and surface- and space-charging appears, when uncoated specimens are irradiated with non-penetrating electrons. Although coating with a grounded conductor abolishes the surface potential, the build-up of an internal space-charge field is possible, depending on the sample thickness and beam voltage used. Consequently, the geometry of the X-ray source volume and the spectral distribution of the emitted continuous and characteristic X-rays are affected. To simulate the situation for microanalysis of frozen hydrated specimens the charging process in electron irradiated ice is studied by recording simultaneous specimen currents from the top and bottom of ice layer preparations. The external currents yield information on the build-up of internal space-charge fields which result from the balance of charge injection, storage, and transport. Irradiation of uncoated bulk specimens with a finely focused beam results in the build-up of a space-charge field close to the surface, which causes a reduction of the depth of microprobe analysis. In coated bulk specimens the induced conductivity renders possible a current flow to the front electrode, thereby limiting the space-charge field. Sections with an effective rear electrode will not charge appreciably if the electron range is larger than about half the section thickness.     

Energy Spectra Of Dislocations In Silicon And Germanium

The properties of edge-type dislocations are strongly dependent on the temperature at which they have been introduced into the crystal. Dislocations produced at T < 0·6 T_m (T_m melting point) exhibit a richer variety of properties than those introduced at T > 0·6 T_m: in germanium a strong increase of the hole density, in silicon an electron para-magnetic resource (EPR)-signal, showing many fine details, and several peaks in the deep level transient spectroscopy (DLTS)-signal, are only found after low-temperature deformation. The increase in the hole density has been ascribed to point defect clouds, which surround the dislocation, and seem to control their mobility. The clouds are not stable at the deformation temperature. The electrical and optical properties of edge-type dislocations, introduced at T > 0·6 T_m into germanium, can be interpreted in terms of a half-filled one-dimensional band (for T ≥ 50 K), which might be due to dangling bonds in the dislocation core. In silicon the experimental data indicate a similar form of the local energy spectrum at dislocations.