Vermeidung von str?mungsinduzierte CO2-Korrosion in der Erdgasproduktion mit Hilfe von Korrosionsinhibitoren

CO₂ corrosion of carbon steel is a serious problem in oil and gas production, since the most used materials are low alloyed carbon steels. There are many approaches to handle the problem of CO₂ corrosion. One flexible and economic way to control corrosion in oil and gas facilities is inhibition but the efficiency of an inhibitor is often limited by flow velocities. To investigate inhibitor efficiency in a superficial flow with high gas velocities neither standardized test had been available nor publications about that topic. Therefore the goal was to do the first investigations in that important field. To reach this aim a special, not standardized flow loop test system has been constructed. Results of these investigations have shown that differences in inhibitor efficiencies are related to chemical composition and flow velocities.     

Charge transfer in thin films of donor–acceptor complexes studied by infrared spectroscopy

The degree of charge transfer in thin films of organic charge transfer (CT)-complexes, which are deposited via thermal evaporation, is examined via infrared-spectroscopy. We demonstrate a linear relationship between the shift in the excitation energy of the CN-stretching mode of CT-complexes with the acceptor 7,7,8,8-tetracyanoquinodimethane (TCNQ) and the charge transfer. The measured correlation corresponds very well with DFT calculations. For Na-TCNQ we observe a splitting in the peak of the CN-stretching mode, which can be explained by the coupling of two modes and was confirmed by the calculations. In CT-complexes with partial charge transfer the appearance of an electronic excitation is demonstrated.     

Effective turbulence and its implications in wind turbine fatigue assessment

The effective turbulence approximation is widely used in the wind energy industry for site‐specific fatigue assessment of wind turbines with reference to loads. It significantly reduces the amount of aero‐elastic simulations required to document structural integrity by integrating out the directional variation of turbulence. Deriving the effective turbulence involves assumptions related to load effect histories, structural dynamics, and material fatigue strength. These assumptions may lead to low accuracy of fatigue load assessments by the effective turbulence compared with full directional simulations. This paper quantifies the implications of the effective turbulence for a multimegawatt wind turbine during normal operation. Analyses based on wind measurements from almost one hundred international sites document that the effective turbulence provides accurate results compared with full sector‐wise simulations, but only when linear SN ‐curves are assumed. For a more advanced steel tower design approach using a bilinear SN ‐curve, a reduction of the cross‐sectional design parameters by almost 10% is achieved. Additional 10% reduction can be obtained if fatigue damage is estimated utilizing the wind direction information. By applying a probabilistic approach, it is shown that this reduction in the design parameter of the steel tower does not compromise the structural integrity when the current IEC 61400‐1 standard is followed. The results presented may improve decision making in site‐specific fatigue assessments of wind turbines and prevent overconservative design, which results from the use of the effective turbulence, and thereby reduce the cost of wind energy.     

Development and Performance of Crystallization with Additives Applied on Different Milk Samples

Crystallization with additives is developed on milk samples from different processing treatments. Performance tests are carried out based on structure analysis of the crystallization patterns. Crystallization with milk as additive is applied following changes in milk after different processing treatments. When an aqueous cupric chloride dihydrate solution crystallizes in the presence of milk as additive, specific patterns emerge, which can be evaluated by image analysis. Milk samples were heated and homogenized in a pilot plant and characterized by various parameters. Furthermore, milk samples from the market were tested. Patterns from milk after heat treatment and homogenization are significantly different from those derived from untreated milk. The experiments could be reproduced for other milk samples, on different days and in another laboratory.     

A review of fracture in viscoelastic materials

This review is written in honor of Max L. Williams who not only started this International Journal of Fracture (the author’s Ph.D. advisor. Originally the Journal was called International Journal of Fracture Mechanics) but who had a seminally fundamental influence on the course of fracture mechanics in general, and specifically as applied to the time dependent failure of elastomers/polymers. In view of that background this article reviews developments over more than 50 years, as colored by my own experiences in regard to this topic. It seems appropriate to include a historical perspective that starts during pre-journal times and addresses the need for understanding time dependent processes governing fracture in rate sensitive materials. To the largest extent, the rate dependence is important where polymers are involved, though under more limited conditions metals and igneous solids as well as ligneous ones exhibit time dependent fracture characteristics. Such facts notwithstanding, the major discussion in this contribution is devoted here to the time dependent fracture of polymeric materials, and elastomeric ones in particular. The emphasis will be thus on time dependent issues governed primarily by the fracture processes in elastomeric solids, which have evolved largely in parallel to problems devoted to the more rigid polymers. Because consideration of fracture of the rigid polymers has often, if not usually, minimized the time dependence, only cursory attention is paid to these, in spite of the fact that they constitute a very important class of materials in the modern engineering community. From an engineering perspective this review is motivated also by an exposition of a persistent lack of knowledge concerning time dependent fracture issues. Most of the work attached to the notion of viscoelastic fracture is—intentionally or by omission—associated with the phenomenon of crack growth under steady state conditions with the expectation that this understanding leads implicitly to resolution of problems governed by transient loadings. Besides reviewing the historical evolution of the knowledge in this field over the past half century, it is a main purpose of this paper to offer information that has either been ignored or has not been explored (this includes the work of the author), but which contradicts this “popular” perception. It is thus an intentionally large part of this presentation which documents compelling motivation for addressing fracture aspects, that are generally important from an engineering design and analysis point-of-view: specifically, it is intended to illustrate the remarkable degree by which the steady state solution to crack propagation deviates from experimental information when transient conditions prevail, and the large range of time scales over which this failure behavior is observed.     

Diamine oxidase supplementation improves symptoms in patients with histamine intolerance

Food Science and Biotechnology - Histamine intolerance (HIT) is thought to be caused by a disproportionate amount of histamine in the body. The enzyme diamine oxidase (DAO) is considered for the...