Analysis of culture fluorescence by a fiber-optic sensor inNicotiana tabacum plant cell culture

The on-line sensing of viable cell weight in plant cell culture process is applied to analysis and control of process. The fiber-optic fluorescence sensor was constructed to measure the NADH-dependent fluorescence inNicotiana tabacum plant cell culture and the analysis of fluorescence signal was done to be correlated with the viable cell weight. The structured kinetic model for cell growth was proposed to estimate the theoretical viable cell weight. The dimensional analysis was proposed for the interpretation of fluorescence signal, in which the path length, the inner filter effect and the hydrodynamic conditions were considered as the key factors on fluorescence signal. The dimensional analysis and empirical correlation of fluorescence signal to viable cell weight was applied to the interpretation of the detected fluorescence signal during cultivation. The proposed interpretation of fluorescence signal using dimensional analysis was well correlated with the viable cell weight estimated by the structured kinetic model as well as by empirical correlation.     

Development of the Base Station Controller and Manager in the CDMA Mobile System

The base station (BS) in the CDMA Mobile System (CMS) connects calls through the radio interface and is designed to provide mobile subscribers with high quality service in spite of mobile subscribers’ motions. The BS consists of multiple base station transceiver subsystems (BTSs), a base station controller (BSC) and a base station manager (BSM). This paper is concerned with the BSC and the BSM. The BSC is located between the BTSs and the mobile switching center (MSC) connected with the public network, and is responsible for controlling mobile calls from and to mobile subscribers via the BTSs. The BSM provides operator-interfaces per the BS and takes responsibility of operation and maintenance (OAM) of the BS. Design of the BSC is based on two module types: functional module and unit module. The functional module is used to support new services easily and the unit module to increase the system capacity economically. Both modular types are easily achieved by inserting the corresponding modules to the system. Particularly, in order to efficiently support the soft handover which is one of CDMA superior advantages, the BSC adopts a large high-speed packet switch connecting up to 512 BTSs, and thus mobile subscribers can be provided with soft handover in high probability. The BSM is based on a commercial workstation to support OAM functions efficiently and guarantee high reliability of the functions. The BSM uses graphical user interface (GUI) for efficient OAM functions of the BS.     

Insight into the chemical reaction of CH2OH with NO: Formation of N-hydroxy formamide as an isocyanic acid precursor

This study has explored the potential energy surface on the chemical reaction of CH₂OH with NO by using ab initio calculation. We have found the new reaction pathway producing N-hydroxy formamide, which can further decompose to generate isocyanic acid as a reducing agent of hydrocarbons selective catalytic reduction.     

Optical packet switching in core networks: between vision andreality

The research on optical packet switching (OPS) has witnessed considerable progress in the 1990s. We examine the future potential of OPS in the core network by discussing this switching approach and the current status of a number of its enabling technologies. Many of these technologies are still in the stage of research and experimentation. We see that optical packet switching may be deployed in the long-term future subject to satisfaction of three main conditions/developments. First, additional technological developments have to take place to overcome remaining implementation challenges while making OPS cost-effective to deploy. Second, a rational migration scenario of the network toward gradual deployment of packet-based optical switching approaches should exist. Finally, carriers have to become more interested in packet-based optical switching solutions     

A 17-GHz Push–Push VCO Based on Output Extraction From a Capacitive Common Node in GaInP/GaAs HBT Technology

This paper presents a new push-push voltage-controlled oscillator (VCO) technique that extracts a second harmonic output signal from a capacitive common node in a negative-g_m oscillator topology. The generation of the second harmonics is accounted for by the nonlinear current-voltage characteristic of the emitter-base junction diode causing: 1) significant voltage clipping and 2) different rise and fall times during the switching operation of the core transistors. Comparative investigations show the technique is more power efficient in the high-frequency region than a conventional push-push technique using an emitter common node. A prototype 17-GHz VCO realized in GaInP/GaAs HBT technology produces an output power of -6dBm and a phase noise of -110.4dBc/Hz at 1-MHz offset, which is equivalent to a VCO figure-of-merit of -184.3dBc/Hz, while drawing 4.38 mA from a 3.0-V supply     

A noncontact NDE method using a laser generated focused-Lamb wave with enhanced defect-detection ability and spatial resolution

The laser generation method of a focused Lamb wave is expected to have high defect-detection abilities and spatial resolution, with the added advantage of noncontact testing. In this method, the laser beam is illuminated on the surface of an object through an arrayed arc slit. The energy of the generated Lamb wave is then concentrated at a focus of an arc. This focusing effect improves the NDE (nondestructive evaluation) performance, which is dependent on the geometries of an arrayed arc slit. In this paper, the relationships between the parameters determining the slit geometry and the focusing effect of the generated Lamb wave was investigated using a parametric study, and appropriate values of the parameters were obtained to maximize the focusing ability. In order to validate the performance of this method, an NDE system was constructed and experiments were performed to detect through-hole defects in a plate. The results showed that the proposed system could clearly detect defects as small as 0.3 mm in diameter, while the conventional line array method failed to detect defects smaller than 1 mm in diameter. Moreover, this method showed possible detection of defects much smaller than 0.3 mm, and great improvements in the spatial resolution as compared with the line array method.     

A QoS management framework for distributed multimedia systems

This paper proposes a high‐performance connection management architecture to design a common QoS framework applied to an ATM network based on the Open Distributed Processing (ODP) concept. We design the QoS framework in accordance from the RM‐ODP information and computational viewpoints. Copyright © 2003 John Wiley & Sons, Ltd.     

Examination of the role of oxygen in the photografting of methacrylic acid on a polyethylene film with a mixed solvent consisting of water and organic solvents

The photografting of methacrylic acid (MAA) on a linear low‐density polyethylene film (thickness = 30 μm) under air and nitrogen atmospheres was investigated at 60°C in mixed solvents consisting of water and an organic solvent, with xanthone as a photoinitiator. The organic solvents used were acetone, methanol, tetrahydrofuran, and dioxane. A maximum percentage of grafting occurred at a certain concentration of the organic solvent in the mixed solvent. This was observed for the systems under both air and nitrogen. The grafting reaction under air exhibited an induction period, but the rate of grafting after the period was greater than that under nitrogen. The formation of poly(ethylene peroxide)s by photoirradiation seemed to be a factor for the accelerated photografting under air. On the basis of attenuated total reflection infrared spectroscopy and scanning electron microscopy of the grafted film, the MAA‐grafted chains of the sample prepared under air tended to penetrate more deeply inside the film than those of the sample prepared under nitrogen. The resulting grafted films exhibited a pH‐responsive character: the grafted films shrank in an acidic medium but swelled in alkaline medium. This was evaluated from measurements of dimensional changes in the grafted films. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 992–998, 2003