Synthesis and biological activity of phthalimide‐based polymers containing 5‐fluorouracil

The attachment of anticancer agents to polymers is a promising approach towards reducing the toxic side‐effects and retaining the potent antitumour activity of these agents. A new tetrahydrophthalimido monomer containing 5‐fluorouracil (ETPFU) and its homopolymer and copolymers with acrylic acid (AA) and with vinyl acetate (VAc) have been synthesized and spectroscopically characterized. The ETPFU contents in poly(ETPFU‐co‐AA) and poly(ETPFU‐co‐VAc) obtained by elemental analysis were 21 mol% and 20 mol%, respectively. The average molecular weights of the polymers determined by gel permeation chromatography were as follows: M_n = 8900 g mol^?1, M_w = 13 300 g mol^?1, M_w/M_n = 1.5 for poly(ETPFU); M_n = 13 500 g mol^?1, M_w = 16 600 g mol^?1, M_w/M_n = 1.2 for poly(ETPFU‐co‐AA); M_n = 8300 g mol^?1, M_w = 11 600 g mol^?1, M_w/M_n = 1.4 poly(ETPFU‐co‐VAc). The in vitro cytotoxicity of the compounds against FM3A and U937 cancer cell lines increased in the following order: ETPFU > 5‐FU > poly(ETPFU) > poly(ETPFU‐co‐AA) > poly(ETPFU‐co‐VAc). The in vivo antitumour activities of all the polymers in Balb/C mice bearing the sarcoma 180 tumour cell line were greater than those of 5‐FU and monomer at the highest dose (800 mg kg^?1). © 2002 Society of Chemical Industry     

Polyurethane–poly(methyl methacrylate) block copolymer dispersions through polyurethane macroiniferters

Polyurethane macroiniferter/poly(methyl methacrylate) block copolymer dispersions with inverse core‐shell morphologies were obtained from 1,1,2,2,‐tetraphenylethane‐1,2‐diol, dimethylol propionic acid, 4,4′‐diphenylmethane diisocyanate, and poly(propylene glycol) via a living radical mechanism. Molecular weight, particle size and dispersion viscosity, and thermal, mechanical, and dynamic mechanical properties of the dispersion cast films are reported as a function of copolymerization time. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1971–1975, 2003     

Fabrication of Patterned Inorganic–Organic Hybrid Film for the Optical Waveguide by Microfluidic Lithography

Inorganic–organic hybrid materials for the optical waveguide were synthesized by the sol–gel process starting from the acid-catalyzed solutions of phenyltrimethoxysilane, methyltriethoxysilane, and tetraethylorthosilicate. The control of the refractive index in the organically modified silicate films was achieved by varying the content of phenyltrimethoxysilane incorporated as a refractive index modifier. A single spin-coating with the precursor solution produced a crack-free buffer layer of 22-μm thickness with a dense microstructure. For the fabrication of the patterned guiding layer on top of the buffer layer, the microfluidic lithography method was used. The patterned microlines of the linewidth of 20–35 μm with a sharp edge definition could form by filling the precursor solutions into the microchannels associated with the polydimethylsiloxane microfluidic device. The patterned guiding layer was optically transparent as similar as the bare quartz glass at the wavelength above 500 nm and had a low propagation loss of 0.77 dB/cm at 1310 nm.     

Aqueous dispersion of polyurethane anionomers from H12MDI/IPDI,PCL, BD,and DMPA

Polyurethane anionomer dispersions were prepared from hydrogenated diphenylmethane diisocyanate (H₁₂MDI) or isophorone diisocyanate (JPDI), poly(caprolactone) (PCL) diol, 1,4-butane diol (BD), and dimethylolpropionic acid (DMPA). Upon neutralization of the DMPA with triethylamine (TEA), the NCO-terminated polyurethane (PU) ionomers were self-emulsified by adding water, followed by chain extension using triethylenetetramine (TETA) in aqueous media. Polyurethanes from H₁₂MDI showed coarser dispersion and better tensile properties over those from IPDI. Polyurethanes prepared by the one-shot method had better dispersion and tensile properties over those by the two-shot method. When some of the PCL diol was replaced by DMPA or BD, tensile strength increased and ductility decreased due mainly to the increased chain rigidity and intermolecular forces. © 1994 John Wiley & Sons, Inc.     

Stormer-numerov approximation for numerical solutions of ordinary and partial differential equations

Stormer-Numerov approximations of high accuracy were developed for solutions of non-linear boundary value problems and nonlinear elliptic partial differential equations. The approximations can be easily adopted also for parabolic partial differential equations in one and more space dimensions and feature fourth-order accuracy. For boundary value problems only three nodes are necessary to obtain the desired fourth order accuracy. The finite difference formula for parabolic partial differential equations can be readily generalized to a nonequidistant mesh so that automatic regridding in space may be used. The Stomer-Numerov approximations are important for solution of problems where storage limitations and computer time expenditure preclude standard second order methods. Because of the fourth order approximations a low number of mesh points can be used for a majority of chemical engineering problems. The application of Stormer-Numerov approximations is illustrated on a number of examples.     

Effects of estrogen-induced hyperlipidemia on the erythrocyte membrane in chicks

The effects of estrogen-induced hyperlipidemia on plasma lipid peroxidation, fatty acid composition and osmotic fragility of erythrocytes in chickens were studied. Young male chickens implanted with estrogen for three wk developed a marked hyperlipidemia. Plasma levels of triglyceride, cholesterol and phospholipid were elevated 68-, four- and 24-fold, respectively, over controls. There was also a two-fold increase in plasma lipid peroxidation measured by the thiobarbituric acid test. Vitamin E supplement (1,000 IU/kg diet) reduced the plasma lipid peroxidation to the control level, but had no effect on the plasma lipid content. Estrogen-induced hyperlipidemia resulted in changes in the fatty acid composition of membrane lipids of erythrocytes. The major changes were an increase in oleic acid from 10.0% to 14.2% and a decrease in linoleic acid from 31.3% to 26.0%. The erytrocytes with an altered membrane fatty acid composition were found to have an increased osmotic fragility. It was apparent that there was a direct correlation between the oleic acid content and the osmotic fragility of erythrocytes.     

A visual study on flame behavior in tone-excited non-premixed jet flames

A visualization study on the effect of forcing amplitude in tone-excited jet diffusion flames has been conducted. Visualization techniques are employed using optical schemes, which are a light scattering photography. Flame stability curve is attained according to Reynolds number and forcing amplitude at a fuel tube resonant frequency. Flame behavior is globally grouped into two from attached flame to blown-out flame according to forcing amplitude; one sticks the tradition flame behavior which has been observed in general jet diffusion flames and the other shows a variety of flame modes such as the flame of a feeble forcing amplitude where traditionally well-organized vortex motion evolves, a fat flame, an elongated flame, and an in-burning flame. Particular attention is focused on an elongation flame, which is associated with a turnabout phenomenon of vortex motion, and on a reversal of the direction of vortex roll-up. It is found that the flame length with forcing amplitude is the direct outcome of the evolution process of the formed inner flow structure. Especially the negative part of the acoustic cycle under the influence of a strong positive pressure gradient causes the shapes of the fuel stem and fuel branch part and even the direction of vortex roll-up to dramatically change.     

Desulfurization in a plate-type gas-lift photobioreactor using light emitting diodes

Hydrogen sulfide gas was removed in a 2-dimensional gas-lift reactor by the photosynthetic microorganismChlorobium thiosulfatophilum using light emitting diodes (LEDs) as a light source. LEDs saved light energy by 99% compared with the incandescent light source. The plate-type gas-lift reactor removed hydrogen sulfide five times better per unit mg of protein, and performed two times better in the maximum performance per unit luminous flux, compared with cylindrical fermentors.     

A study on carbon coating to silicon and electrochemical characteristics of Si-C/Li cells

The aim of this paper is to study the electrochemical behavior of Si-C material synthesized by heating a mixture of silicon and polyvinylidene fluoride (PVDF) in the ratios of 5, 20, and 50 wt%. The particle size of the synthesized material was found to be increased with increase in the PVDF ratio. The coexistence of silicon with carbon was confirmed from the XRD analysis. A field emission scanning electron microscope (FESEM) study performed with the material proved the improvement in coating efficiency with increase in the PVDF ratio. Coin cells of the type 2025 were made by using the synthesized material, and the electrochemical properties were studied. An electrode was prepared by using the developed Si-C material. Si-C|Li cells were made with this electrode. A charge|discharge test was performed for 20 cycles at 0.1 C hour rate. Initial charge and discharge capacities of Si-C material derived from 20 wt% of PVDF was found to be 1,830 and 526 mAh|g, respectively. Initial charge/discharge characteristics of the electrode were analyzed. The level of reversible specific capacity was about 216mAh/g at Si-C material derived from 20 wt% of PVDF, initial intercalation efficiency (IIE), intercalation efficiency at initial charge/discharge, was 68%. Surface irreversible specific capacity was 31 mAh/g, and average specific resistance was 2.6 ohm * g.     

Measurement and modeling solubility of bioactive coumarin and its derivatives in supercritical carbon dioxide

To design a supercritical fluid extraction process for the separation of bioactive substances from natural products, a quantitative knowledge of phase equilibria between target biosolutes and solvent is necessary. How-ever, mostly no such information is available in literature to date. Thus in the present study, illustratively the solubility of bioactive coumarin and its various derivatives (i.e., hydroxy-, methyl-, and methoxy-derivatives) in supercritical CO₂ were measured at 308.15–328.15 K and 10–30 MPa. Also, the pure physical properties such as normal boiling point, critical constants, acentric factor, molar volume and standard vapor pressure for coumarin and its derivatives were estimated. By these estimated information, the measured solubilities were quantitatively correlated by an approximate lattice equation of state proposed recently by the present authors.