Integrated-Optic Polarization Controlling Devices Using Electro-Optic Polymers

Integrated-optic polarization controlling devices such as polarizers, polarization splitters, and polarization converters, are proposed and demonstrated in nonlinear optic polymers. Poling-induced birefringence in electro-optic polymers is exploited to fabricate the devices. The polymeric waveguide polarizers show low excess losses, and extinction ratios of 20.7 dB and 17.1 dB for TM-pass and TE-pass polarizers, respectively. The polymeric waveguide polarization splitters exhibit TE-TM mode splittings with crosstalk of 14.2 dB and 10.1 dB for TM and TE mode splittings, respectively. The polymeric waveguide polarization converters show successful TE/TM polarization mode conversion with conversion efficiencies of higher than 30 dB. The device employs poling-induced waveguides which have slowly rotating azimuth angle of optic axis along the light propagation direction. The novel polarization converter is insensitive to wavelength and easier to fabricate than the other polarization converters containing periodic structures.     

A location‐aware peer‐to‐peer overlay network

This work describes a novel location‐aware, self‐organizing, fault‐tolerant peer‐to‐peer (P2P) overlay network, referred to as Laptop. Network locality‐aware considerations are a very important metric for designing a P2P overlay network. Several network proximity schemes have been proposed to enhance the routing efficiency of existing DHT‐based overlay networks. However, these schemes have some drawbacks such as high overlay network and routing table maintenance overhead, or not being completely self‐organizing. As a result, they may result in poor scalability as the number of nodes in the system grows. Laptop constructs a location‐aware overlay network without pre‐determined landmarks and adopts a routing cache scheme to avoid maintaining the routing table periodically. In addition, Laptop significantly reduces the overlay maintenance overhead by making each node maintain only the connectivity between parent and itself. Mathematical analysis and simulations are conducted to evaluate the efficiency, scalability, and robustness of Laptop. Our mathematical analysis shows that the routing path length is bounded by log_d N, and the joining and leaving overhead is bounded by d log_d N, where N is the number of nodes in the system, and d is the maximum degree of each node on the overlay tree. Our simulation results show that the average latency stretch is 1.6 and the average routing path length is only about three in 10 000 Laptop nodes, and the maximum degree of a node is bounded by 32. Copyright © 2006 John Wiley & Sons, Ltd.     

Differential Game for Distributed Power Control in Device-to-Device Communications Underlaying Cellular Networks

Wireless Personal Communications - In the formulating of power control for wireless networks, the radio channel is commonly formulated using static models of optimization or game theory. In these...     

End-to-End Security Protocol for Mobile Communications with End-User Identification/Authentication

As great progress has been made in mobile communications, many related researches on this topic have been proposed. In most of the proposed protocols so far, it has been assumed that the person using the mobile station is the registrar of the SIM card; as a matter of, the previous protocols for authentication and session key distribution are built upon this assumption. This way, the mobile user can only verify the identity of the owner of the SIM card. This means that the mobile user can only know that who registers the SIM card with which he communicates. Note that the human voice can be forged. To make sure that the speaker at the other end is the right owner of the SIM card, concept of the password is involved to construct the end-to-end security authentication protocol. In the proposed protocol, each mobile user can choose a password. When two mobile users want to communicate with each other, either user can request to perform a end-user identification process. Only when both of the end users input the correct passwords can the correct common session key be established.     

Performance of GaAs-AlGaAs V-grooved inner stripe quantum-well wirelasers with different current blocking configurations

GaAs-AlGaAs V-grooved inner stripe (VIS) quantum-well wire (QWW) lasers grown by metalorganic chemical vapor deposition with different current blocking configurations, n-blocking on p-substrate (VIPS), p-n-p-n blocking on n-substrate (VI(PN)_nS) and p-blocking on n-substrate (VINS) have been fabricated and characterized. The VIPS QWW lasers show the most stable characteristics with effective current confinement: one of the lasers shows fundamental transverse mode, lasing up to 5 mW/facet, typical threshold current of 39.9 mA at 818.5 mm, an external differential quantum efficiency of 24%/facet, and characteristic temperature of 92 K. The current tuning rate was almost linear at 0.031 mm/mA, and the temperature tuning rate was measured to be 0.14 nm/°C. Comparison of the light output versus current characteristics of the lasers with different current blocking configurations is presented here     

A generalized suboptimum unequally spaced channel allocationtechnique. I. In IM/DD WDM systems

Four-wave mixing (FWM) is the most serious fiber nonlinearity associated with low-input optical power levels in long-haul multichannel optical systems employing dispersion-shifted fiber. To reduce the crosstalk due to FWM, a generalized suboptimum unequally spaced channel allocation (S-USCA) technique is proposed and investigated. Even though the developed technique is useful in combating FWM crosstalk in wavelength division multiplexing (WDM) lightwave systems with up to 12 channels, its main virtue is in designing multichannel WDM lightwave systems with more than 12 channels. Comparisons of power penalty due to FWM between equal channel spacing (ECS) systems and the S-USCA systems are presented. It is shown that for an intensity modulation/direct detection (IM/DD) transmission system operating in an optical bandwidth of 16 nm with 0 dBm (1 mW) peak optical input power per channel, while a conventional ECS WDM system with 0.84-nm channel spacing cannot even achieve a bit-error rate (BER)=10^-9, the suboptimum technique developed in this paper, for the same minimum channel spacing, can achieve a BER=10^-9 with an FWM crosstalk power of less than 1 dB at the worst channel in a 20-channel WDM system     

Low-complexity architecture of rake receiver for multi-code CDMAsystem

A new low-complexity architecture CDMA rake receiver for multi-code CDMA systems is proposed. It contains shared hardware blocks to reduce hardware complexity. The hardware complexity of the proposed architecture is compared with that of a conventional CDMA rake receiver in terms of the number of Walsh code channels. The result shows that our proposed architecture has a 12 and 18.6% reduction in gate count when the number of Walsh code channels is 4 and 7, respectively     

Long-wavelength erbium-doped fiber amplifier gain enhanced by ASEend-reflectors

We use for what we believe is the first time narrow-band end-reflectors to reduce losses through short-wavelength amplified stimulated emission (ASE) in silica-based erbium-doped fiber amplifiers operating at wavelengths above 1570 mm. The end-reflectors feed a small fraction of the ASE, up to a few tenths of a milliwatt, back into the amplifying fiber. The reflected ASE compresses the short-wavelength gain and thus reduces the ASE-losses, from, e,g., 50 mW for a launched pump power of 110 mW at 980 nm without end-reflector to 10 mW with an optimized end-reflector. We investigate possible improvements of gain (around 5 dB) and output power (up to 17 mW), and the influence of the amount and wavelength of the feedback     

Measurements and Statistical Modeling of 900 MHz Radio Propagation Channels for Microcellular and Personal Communications in Tunnels

This paper reports the results of measurements of 900 MHz narrow-band radio wave propagation in four tunnels with pedestrians and vehicles. Analysis of the measured data files shows that the power distance factor ranges from 1.87 to 4.44. The power attenation rate with distance is insensitive to the location of the transmit antenna in the cross section of a tunnel, but the transmit antenna insertion loss is. The log-normal distribution fits slow variation of the received signals. The Racian distribution closely describes fast fading in the straight sections of tunnels. However, the Rayleigh distribution does not fit the fast fading in the curved sections of tunnels, as expected.     

Effect of shroud flow on high quality InxGa1−xN deposition in a production scale multi-wafer-rotating-disc reactor

High quality InGaN thin films and InGaN/GaN double heterojunction (DH) structures have been epitaxially grown on c-sapphire substrates by MOCVD in a production scale multi-wafer-rotating-disc reactor between 770 to 840°C. We observed that shroud flow (majority carrier gas in the reaction chamber) is the key to obtaining high quality InGaN thin films. High purity H₂ as the shroud flow results in poor crystal quality and surface morphology but strong photolumines-cence (PL) at room temperature. However, pure N₂ as the shroud flow results in high crystal quality InGaN with an x-ray full width at half maximum (FWHM)_InGaN(0002) of 7.5 min and a strong room temperature PL peaking at 400 nm. In addition, InGaN/GaN single heterojunction (SH) and DH structures both have excellent surface morphology and sharp interfaces. The full width at half maximum of PL at 300K from an InGaN/GaN DH structure is about 100 meV which is the best reported to date. A high indium mole fraction in InGaN of 60% and high quality zinc doped InGaN depositions were also achieved.