Permeability of low molecular weight organics through nanofiltration membranes

The removal of natural organic matter (NOM) using nanofiltration (NF) is increasingly becoming an option for drinking water treatment. Low molecular weight (LMW) organic compounds are nevertheless only partially retained by such membranes. Bacterial regrowth and biofilm formation in the drinking water distribution system is favoured by the presence of such compounds, which in this context are considered as the assimilable organic carbon (AOC). In this study, the question of whether NF produces microbiologically stable water was addressed. Two NF membranes (cut-off of about 300 Da) were tested with different natural and synthetic water samples in a cross-flow filtration unit. NOM was characterised by liquid chromatography with organic carbon detection (LC-OCD) using a size-exclusion column in addition to specific organic acid measurements, while AOC was measured in a batch growth bioassay.Similarly to high molecular weight organic compounds like polysaccharides or humic substances that have a permeability lower than 1%, charged LMW organic compounds were efficiently retained by the NF membranes tested and showed a permeability lower than 3%. However, LMW neutrals and hydrophobic organic compounds permeate to a higher extent through the membranes and have a permeability of up to 6% and 12%, respectively. Furthermore, AOC was poorly retained by NF and the apparent AOC concentration measured in the permeated water was above the proposed limit for microbiologically stable water. This indicates that the drinking water produced by NF might be biologically unstable in the distribution system. Nevertheless, in comparison with the raw water, NF significantly reduced the AOC concentration.     

A biofilm model for flowing systems in the food industry

When bacteria attach to the walls of pipelines, they can form biofilms, which can cause the recontamination of food products. In order to quantify such recontamination, a one-dimensional biofilm model was developed taking into account adsorption, desorption, and the growth of cells. The model consisted of two mass balances describing increases in biofilm formation at the wall and the accumulation of cells in the liquid phase. The necessary parameters for the model were obtained in laboratory biofilm experiments. These experiments involved a flowing system and the use of Staphylococcus aureus as a model pathogen and silicon tubing as a testing material. S. aureus was inoculated into the system for 2 h, and then the system was changed to a sterile medium. Both biofilm formation and the release of cells into the flowing liquid were measured until steady-state conditions were reached (for up to 9 days). The experiments were performed in duplicate for different flow conditions (i.e., for Reynolds numbers of 3.2, 32, and 170). It was shown that at higher Reynolds numbers, the biofilm developed faster, probably owing to an increase in the transfer of nutrients to the surface. The proposed biofilm model was capable of describing the data obtained for the three different flow conditions with the use of the specific growth rate in the biofilm and the desorption coefficient as fit parameters. The specific growth rates were 0.16, 0.27, and 0.49 h(-1) for Reynolds numbers of 3.2, 32, and 170, respectively, and the desorption coefficients were about 1% of these values.     

HAWT near‐wake aerodynamics,Part I: axial flow conditions

An improved physical understanding of the rotor aerodynamics of a horizontal axis wind turbine (HAWT) is required to reduce the uncertainties associated with today's design codes. Wind tunnel experiments contribute to increased knowledge and enable validation and construction of models. The present study focuses on the near‐wake of a model HAWT in both axial and yawed flow conditions. At three downstream planes parallel to the rotor plane, single‐sensor hot‐film traverses are made. The phase‐locked unsteady three‐dimensional flow velocity vector is determined by a novel data reduction method. A series of two papers discusses the near‐wake aerodynamics of a model HAWT. The main goals are to obtain a detailed understanding of the near‐wake development and to arrive at a base for model construction and validation. The first paper presents the experimental setup, data reduction and the results for the baseline case (axial flow conditions). In the second paper, the results for the yawed flow cases are presented and the effect of yaw misalignment on the near‐wake development is discussed. Copyright © 2008 John Wiley & Sons, Ltd.     

In situ TEM nanoindentation and dislocation-grain boundary interactions: a tribute to David Brandon

As a tribute to the scientific work of Professor David Brandon, this paper delineates the possibilities of utilizing in situ transmission electron microscopy to unravel dislocation-grain boundary interactions. In particular, we have focused on the deformation characteristics of Al–Mg films. To this end, in situ nanoindentation experiments have been conducted in TEM on ultrafine-grained Al and Al–Mg films with varying Mg contents. The observed propagation of dislocations is markedly different between Al and Al–Mg films, i.e. the presence of solute Mg results in solute drag, evidenced by a jerky-type dislocation motion with a mean jump distance that compares well to earlier theoretical and experimental results. It is proposed that this solute drag accounts for the difference between the load-controlled indentation responses of Al and Al–Mg alloys. In contrast to Al–Mg alloys, several yield excursions are observed during initial indentation of pure Al, which are commonly attributed to the collective motion of dislocations nucleated under the indenter. Displacement-controlled indentation does not result in a qualitative difference between Al and Al–Mg, which can be explained by the specific feedback characteristics providing a more sensitive detection of plastic instabilities and allowing the natural process of load relaxation to occur. The in situ indentation measurements confirm grain boundary motion as an important deformation mechanism in ultrafine-grained Al when it is subjected to a highly inhomogeneous stress field as produced by a Berkovich indenter. It is found that solute Mg effectively pins high-angle grain boundaries during such deformation. The mobility of low-angle boundaries is not affected by the presence of Mg.Special title: Advanced Materials and Characterization: Proceedings of the Brandon Symposium; Guest Editors: Wayne D. Kaplan and Srinivasa Ranganathan     

Influence of thermal ageing on the stability of polymer bulk heterojunction solar cells

A new approach is presented in order to improve the thermal stability of polymer: [6-6]-phenyl C₆₁ butyric acid methyl ester (PCBM) bulk heterojunction solar cells. The central idea in this approach is the use of a polymer with high glass transition temperature (T_g), well above the normal operating temperatures of the devices. In this paper, a PPV-derivative with a T_g of 150 °C was used as an electron donor and the thermal stability of the obtained solar cells was compared with solar cells based on the reference material poly[2-methoxy-5-(3′,7′-dimethyloctyloxy)-1,4-phenylene vinylene] (MDMO-PPV) with a T_g of 45 °C. The use of the material with higher glass transition temperature resulted in a significant improvement of the thermal stability of the photovoltaic parameters. Furthermore, a systematic transmission electron microscope (TEM) study demonstrates that the better thermal stability of performance coincides with a more stable active layer morphology. Both improvements are attributed to the reduced free movement of the electron donor material (PCBM) within the active layer of the solar cell.     

Pixel selection for near-infrared chemical imaging (NIR-CI) discrimination between fish and terrestrial animal species in animal protein by-product meals

This paper proposes a method based on near-infrared hyperspectral imaging for discriminating between terrestrial and fish species in animal protein by-products used in livestock feed. Four algorithms (Mahalanobis distance, Kennard-Stone, spatial interpolation, and binning) were compared in order to select an appropriate subset of pixels for further partial least squares discriminant analysis (PLS-DA). The method was applied to a set of 50 terrestrial and 40 fish meals analyzed in the 1000-1700 nm range. Models were then tested using an external validation set comprising 45 samples (25 fish and 20 terrestrial). The PLS-DA models obtained using the four subset-selection algorithms yielded a classification accuracy of 99.80%, 99.79%, 99.85%, and 99.61%, respectively. The results represent a first step for the analysis of mixtures of species and suggest that NIR-CI, providing valuable information on the origin of animal components in processed animal proteins, is a promising method that could be used as part of the EU feed control program aimed at eradicating and preventing bovine spongiform encephalopathy (BSE) and related diseases.     

Characterisation of aquatic humic and non-humic matter with size-exclusion chromatography--organic carbon detection--organic nitrogen detection (LC-OCD-OND)

Size-exclusion chromatography in combination with organic carbon detection (SEC-OCD) is an established method to separate the pool of NOM into major fractions of different sizes and chemical functions and to quantify these on the basis of organic carbon. One specific approach, also known as LC-OCD-OND, is based on the Gräntzel thin-film UV-reactor. This approach is described with recent improvements in fraction assignation (humic substances, biopolymers, building blocks, low molecular weight organic acids and neutrals, hydrophobic organic carbon), the coupling of a novel organic nitrogen detector (OND), and an improved diagram for the characterisation of aquatic humic substances (HS-diagram). The diagram replaces the operational distinction between humic and fulvic acids by a continuum ranging from aquagenic fulvic acids to pedogenic humic acids.