On the interior resonance problem when applying a hybrid FEM/MoMapproach to model printed circuit boards

A hybrid finite element method/method of moments (FEM/MoM) technique is used to analyze a printed circuit board power bus structure where the source and observation points are in the near field. The FEM is used to model the lossy region between the planes of the board including the source. The MoM is used to model the region outside the planes and provide a radiation boundary condition to terminate the FEM mesh. Numerical results for a bridged power bus structure are compared with measurements. A nonphysical interior resonance of the electric field integral equation is observed. The problem can be avoided by using a hybrid technique based on a combined field integral equation     

An iterative ADI-FDTD with reduced splitting error

We present a new iterative alternating-direction-implicit finite-difference time-domain (ADI-FDTD) method. By recognizing the ADI-FDTD method as a special case of a more general iterative approach to solve the Crank-Nicolson (CN) FDTD scheme, the splitting error in ADI-FDTD can be reduced systematically. Numerical examples are used to illustrate the improved accuracy of this method.     

Cooling and Solidification of Melted Drops in an Immiscible Cooling Medium

The cooling and solidification of melted drops during their movement in an immiscible cooling medium is widely employed for granulation in the chemical industry, and a study of these processes to provides a basis for the design of the granulation tower height and the temperature of the cooling medium is reported. A physical model of the cooling and solidification of the drop is established and the numerical calculation is performed. The influences of the key factors in the solidification, i.e., Bi number, drop diameter, temperature of the cooling medium, etc. are presented. The cooling and solidification during wax granulation in a water‐cooling tower and during urea granulation in an air‐cooling tower (spraying tower) are described in detail. Characteristics of the solidification and temperature distribution within the particle at different times are shown. The model and calculations can be used for structure design of the granulation tower and optimization of the operation parameters.     

美国、加拿大城市规划与建设考察报告

为扩大我省工程咨询业在国外的影响,进一步加强工程咨询企业的国际合作,学习和借鉴发达国家在城市规划与建设领域的先进理念和经验,受美国、加拿大相关部门的的邀请,经省发展改革委批准,由江苏省工程咨询协会组织的业内领导及工程咨询专业技术骨干赴美国、加拿大考察团一行9人,于6月15日至27日对美国、加拿大城市规划与建设情况进行了学习考察.     

Effects of contact shape on biological wet adhesion

Wet adhesion is widely adopted in biological adhesion systems in nature. Wet adhesion is studied in this paper with the focus on the effect of different contact shapes (flat, concave, convex, and ring-like) on the adhesion force. The evolution of the liquid bridge between a fiber tip and substrate during the detaching process shows two transition points. The first transition from the radius-controlled to the contact-angle controlled process is critical to influence the strength and robustness of adhesion. We show that a concave shape is more effective than a flat one, while a convex shape has no advantage. A ring-like contact shape has advantages in a hydrophobic environment and on a rough surface.     

基于PNX1300系列多媒体处理器的MPEG-4视频压缩卡设计

介绍了一种基于MPEG—4视频压缩标准和PNX1300系列多媒体处理器的MPEG—4视频压缩卡的设计方案，给出了该视频压缩卡的硬件结构框图，详细分析了其软件编码器的设计流程。     

软件无线电中采样率转换技术的实现及在3G中的应用

目前移动通信标准繁多,且新旧体制混杂,很难做到统一.为了实现互连互通,目前比较可行的方法是采用软件无线电.采样率转换技术是实现互连互通的关键.文中针对第三代移动通信系统(3G)中不同通信体制的带宽、速率要求,根据分级变换的思想,对3G中的CDMA2000和TDSCDMA的采样率转换方案进行了设计,并对3G中的5种制式的采样率转换方案进行了分析比较.实验表明,这一方案可以在采样率变换的高效网络结构基础上进一步降低滤波运算量和存储量.     

基于μCLinux的NAT设备的设计与开发

NAT(网络地址翻译)技术有效地解决了IP地址紧缺的问题,为实现IPv4到IPv6的平滑过渡发挥了巨大的作用.在一个体积小、重量轻、价格低廉的嵌入式平台上实现NAT设备具有很好的实际意义.文中介绍了NAT技术的原理和实现过程,在自行设计的ARM7嵌入式硬件平台上基于μCLinux操作系统实现了NAT的功能,并通过实现其他相关功能,构建了完整的NAT设备,完成了小型网络接入Internet的方案.     

1995年中国极致华彩

1995年4月下旬，中国服装设计师协会主办了首届中国“十佳”服装设计师评选活动。在符合条件的上万名设计师当中选拔出15名候选人，进而评选出十位最佳设计师，被赋予“十佳”称号。首届获得十佳称号的设计师为张肇达、刘洋、王新元、吴海燕、马可、于泽正、崔游、陈红、刘丽丽和罗亚平等十人。