赋予针织服装个性魅力的女红工艺

将富于变化的女红工艺与单调的针织服装相结合，会使针织服装由平淡变为丰富，由呆板变为活泼。文章论述了在针织服装中运用女红图案、色彩、材料、针法的原理。     

Heat transfer of a row of three butane/air flame jets impinging on a flat plate

Experiments were performed to investigate the heat transfer characteristics of a row of three premixed, laminar, butane/air flame jets impinging on a water-cooled flat plate. The between-jet interference was found to reduce the heat transfer rate in the jet-to-jet interacting zone due to the depressed combustion. The interference became stronger when the jet-to-jet spacing and/or the nozzle-to-plate distance were/was small. The positive pressure existed in the between-jet interacting zone caused the asymmetric flame and heat transfer distribution of the side jet. The meeting point of the spreading wall jets of the central and the side jets did not occur at the midpoint of the neighboring jets, but at a location shifted slightly outwards. The maximum local heat flux and the maximum area-averaged heat flux occurred at a moderate nozzle-to-plate distance of 5d with a moderate jet-to-jet spacing of 5d. The lowest area-averaged heat flux was produced when both the jet-to-jet spacing and the nozzle-to-plate distance were small. Comparing with a single jet under the same experimental conditions, the heat transfer rates in both the stagnation point and the maximum heat transfer point were shown to be enhanced in a row of three-jet-impingement system. The present study provided detailed information on the heat transfer characteristics of a row of three in-line impinging flame jets, which had rarely been reported in previous study.     

裂缝性潜山储层地震描述技术

裂缝是潜山油气藏的重要储集层 ,潜山的油气产出与裂缝的发育情况密切相关 ,因此 ,对裂缝发育控制因素和裂缝发育规律进行了分析和探讨。尽管单条裂缝在地震资料上难以识别 ,但是裂缝带在地震资料上有其特征。描述了裂缝储层的地球物理特征 ,并利用测井约束反演技术、吸收系数技术、地震相分类和相干分析技术对潜山储层进行预测。通过在车古 2 0 1潜山的应用实例分析 ,说明以上 4种储层描述技术比较有效     

计算机辅助维修性设计与分析中的版本管理

为了支持渐进的和探索武的维修性设计与分析过程，必须进行有效的版本管理。本文研究了维修性CAD框架中版本管理的设计方案以及实现过程。     

牵引一制动型液力变矩器原始特性研究

 基于束流理论建立了牵引一制动型液力变矩器原始特性参数计算数学模型．对以D430型液力变矩器为原
型设计的牵引一制动型液力变矩器进行了原始特性参数计算，并将计算结果同D430型液力变矩器原始特性参数进
行了比较分析，结论合理． 对设计牵引一制动型液力变矩器具有一定的指导意义．     

在ad hoc网络中一种新的节能路由切换模型

提出了一种基于能量消耗的路由切换模型(ERHM),它在路由维护中利用切换技术来使路由的能量消耗最小.仿真结果表明采用切换技术的ERHM模型的能量节省量要比不采用切换技术节约1.5～7.5倍,且节点的移动性越大,能量节约越多.     

Digital watermarking robust to geometric distortions.

In this paper, we present two watermarking approaches that are robust to geometric distortions. The first approach is based on image normalization, in which both watermark embedding and extraction are carried out with respect to an image normalized to meet a set of predefined moment criteria. We propose a new normalization procedure, which is invariant to affine transform attacks. The resulting watermarking scheme is suitable for public watermarking applications, where the original image is not available for watermark extraction. The second approach is based on a watermark resynchronization scheme aimed to alleviate the effects of random bending attacks. In this scheme, a deformable mesh is used to correct the distortion caused by the attack. The watermark is then extracted from the corrected image. In contrast to the first scheme, the latter is suitable for private watermarking applications, where the original image is necessary for watermark detection. In both schemes, we employ a direct-sequence code division multiple access approach to embed a multibit watermark in the discrete cosine transform domain of the image. Numerical experiments demonstrate that the proposed watermarking schemes are robust to a wide range of geometric attacks.     

聚氨酯/聚(甲基丙烯酸甲酯-甲基丙烯酸丁酯)互穿聚合物网络聚合物的阻尼性能

采用本体聚合法合成出一系列阻尼性能良好的聚氨酯/聚(甲基丙烯酸甲酯-甲基丙烯酸丁酯)(PU/P(MMA-BMA))互穿聚合物网络(IPN)聚合物,通过动态力学分析方法表征了PU/P(MMA-BMA)IPN聚合物的阻尼性能。探讨了加入催化剂、高温后处理、交联剂用量及PU与P(MMA-BMA)的质量比对PU/P(MMA-BMA)IPN聚合物阻尼性能的影响。实验结果表明,经高温后处理后,以二月桂酸二丁基锡为催化剂、交联剂二乙烯基苯用量(占MMA和BMA的摩尔分数)为1.5%、PU与P(MMA-BMA)的质量比接近1或小于1时,PU/P(MMA-BMA)IPN聚合物具有良好的阻尼性能。