Medical imaging research on idiopathic hemifacial spasm

In order to have a medical imaging examination for idiopathic hemifacial spasm before surgery, we designed a new method by using vertebroarterial DSA and vertebroarterial CTA based on an aired cisternapontis, 36 patients were examined since 1989 and the compression of the facial nerve from brain stem to porus acousticus internus was showed clearly in all the cases. The arteries responsible for the compression were cerebellar inferior posterior (55.6%), cerebellar inferior anterior (44.4%), auditory internus (25.0%) and vertebroarterial (11.1%), 36% of all the cases had more than one responsible arteries, 22.2% cases had only one compression point, 38.9% had two points, 25.0% had 3 and 13.9% had more. 85.7% of the compression points located in the root zone and 14.3% near the porus acousticus internus. 24 cases were treated with decompression surgery, it indicated that the compression conditions just met the medical imaging examinationg results. After surgery the symptom disappeared in 23 cases and remarkably released in one case with no death case. We believed that this method might be helpful to idiopathic hemifacial spasm decompression surgery and other surgeries in the CP angle.     

Development of the Base Station Controller and Manager in the CDMA Mobile System

The base station (BS) in the CDMA Mobile System (CMS) connects calls through the radio interface and is designed to provide mobile subscribers with high quality service in spite of mobile subscribers’ motions. The BS consists of multiple base station transceiver subsystems (BTSs), a base station controller (BSC) and a base station manager (BSM). This paper is concerned with the BSC and the BSM. The BSC is located between the BTSs and the mobile switching center (MSC) connected with the public network, and is responsible for controlling mobile calls from and to mobile subscribers via the BTSs. The BSM provides operator-interfaces per the BS and takes responsibility of operation and maintenance (OAM) of the BS. Design of the BSC is based on two module types: functional module and unit module. The functional module is used to support new services easily and the unit module to increase the system capacity economically. Both modular types are easily achieved by inserting the corresponding modules to the system. Particularly, in order to efficiently support the soft handover which is one of CDMA superior advantages, the BSC adopts a large high-speed packet switch connecting up to 512 BTSs, and thus mobile subscribers can be provided with soft handover in high probability. The BSM is based on a commercial workstation to support OAM functions efficiently and guarantee high reliability of the functions. The BSM uses graphical user interface (GUI) for efficient OAM functions of the BS.     

Activity of NiO in (Ni,Mg)O Solid Solutions

Disagreement exists in the literature concerting the activity of NiO in (Ni,Mg)O solid solutions. Ideal behavior, as well as strong positive deviations and strong negative deviations from ideality, has been reported. In the present study, the activity of NiO was determined by electromotive force measurements using the solid-state cell Pt/Ni-NiO/0.92ZrO₂-0.08Y₂O₃/Ni-(Ni,Mg)O/Pt. The compositions studied had NiO mole fractions of 0.1,0.3,0.5,0.7, and 0.9. In agreement with theoretical expectations, the solid solutions exhibited ideal behavior at 882° and 982°C. Possible reasons for the conflicting results in the literature arc presented.     

Energy release rates of crack kinking by boundary condition sensitivity analysis

The energy release rate, which is the total derivative of the energy with respect to crack length, is recognized as corresponding to the shape sensitivity analysis with the crack length change represented by the tangential component of design velocity. In this paper the sensitivity formula recently developed for a changing boundary condition has been further extended to cover crack kinking under mixed mode loading. Due to difficulty in defining the velocity field at the corner, the energy release rate at the onset of crack kinking is obtained by extrapolating the energy release rates for finite length kinked cracks. A rectangular plate with a single edge slant crack under uniform tension is taken as a numerical example. The multi-region technique in the numerical implementation of the boundary integral equation is adopted to consider the asymmetry of the problem. Excellent accuracy is observed as compared with reference analytic solutions.     

硅中硼离子注入校准样品的研制

本文主要介绍了硅中硼离子注入校准样品的制备与研究。分别用三台SIMS仪器对样品进行了深度剖析与比对,并对用作校准目的的样品主要参数进行了定值。     

缝纫机和导向机在BOPP二次套装上的应用

用户工艺要求树脂BOPP无杂质，一次包装在运输和使用中都会不同程度带进一些污物。人工二次套装费用高，极易形成二次污染。应用缝纫机、导向机、一次性完成二次套装，解决了人工二次套装解决不了的问题，具有很高经济效益和社会效益。     

高合金铁基烧结材料在轧钢导位中的应用研究

本文研究了高合金铁基烧结材料在轧钢导位中的应用。实验表明,通过粉末冶金液相烧结技术,可以获得具有优良综合性能的制品,材料密度ρ≥7.5 g/cm3,硬度≥55 HRC,抗弯强度≥1 000 MPa,冲击韧度αk≥3.9 J/cm2,满足了轧钢导位辊的工作要求。材料利用率可达95%以上、降低了制备成本。使用寿命是普通轧辊寿命的3~6倍,适用于线材和小型型材的轧钢生产。     

Highly active lanthanum doped nickel anode for solid oxide fuel cells directly fuelled with methane

Lanthanum doped nickel and YSZ composite anode (LaNi–YSZ) exhibited a greatly reduced polarization resistance and high performance for electrochemical oxidation of hydrogen and methane, which resulted from a fine anode structure with a high dispersion of nickel catalyst and a high catalytic activity towards methane.     

山东省水利系统推行政务公开工作探讨

1水利部门政务公开的重要意义水是基础性的自然资源和战略性的经济资源,又是控制性的生态要素。水利工作事关全省经济社会发展大局,事关广大人民群众的根本利益。在全省水利系统推行政务公开,是实践"三个代表"重要思想,坚持治