Enhanced light output in nitride-based light-emitting diodes by roughening the mesa sidewall

In this letter, we will report on a nitride-based light emitting diode with a mesa sidewall roughening process that increases light output power. The fabricated GaN-based light-emitting diode (LED) wafers were first treated through a photoelectrochemical (PEC) process. The Ga/sub 2/O/sub 3/ layers then formed around the GaN : Si n-type mesa sidewalls and the bottoms mesa etching regions. Selective wet oxidation occurred at the mesa sidewall between the p- and the n-type GaN interface. The light output power of the PEC treated LED was seen to increase by about 82% which was caused by a reduced index reflectance of GaN-Ga/sub 2/O/sub 3/-air layers, by a rough Ga/sub 2/O/sub 3/ surface, by a microroughening of the GaN sidewall surface, and by a selective oxidation step profile of the mesa sidewall that increases the light-extraction efficiency from the mesa sidewall direction. Consequently, this wet PEC treated process is suitable for high powered nitride-based LEDs lighting applications.     

S盒设计中的一种新准则

本文提出了强扩散准则,强雪崩效应以及扩散效应的逼近优势等相关概念,给出了差分均匀性与强k阶扩散准则之间的相互关系,利用给出的设计准则改进了Rijndael密码的S盒。     

择形催化合成2,6-DMN的研究进展

介绍了2,6-二甲基萘(2,6-DMN)的制备方法,详细论述了萘、甲基萘在分子筛催化剂上择形催化合成2,6-DMN的研究进展,提出了择形催化合成2,6-DMN的研究方向。     

憎水性栀子蓝色素制备的研究

以浓盐酸为催化剂,采用乙酸酐酯化处理水溶性栀子蓝色素,制备了憎水性栀子蓝色素.探讨了栀子蓝色素与乙酸酐料液比、反应时间和反应温度等因素对憎水性栀子蓝色素色价的影响.结果表明:采用料液比1:20,在常温下反应4 h,为制备憎水性栀子蓝色素的最优条件.同时,通过红外光谱、可见吸收光谱及溶解性对栀子蓝色素的酯化改性进行了初步的探讨.     

A new method for producing high melt strength polypropylene with reactive extrusion

A high‐melt‐strength polypropylene (HMSPP) was prepared using a twin‐screw reactive extruder from a commercial isotactic polypropylene through two stages, first, maleic anhydride is grafted to polypropylene to obtain a maleic anhydride‐grafted polypropylene (PP‐g‐MA), and then the grafted polymer is reacted with epoxy to extend the branched chain. Fourier transformed infrared spectroscopy indicated that maleic anhydride was grafted on polypropylene and reacted with epoxy. Melt flow rate and sag resistance test showed that the melt strength of the HMSPP improved considerably. Differential scanning calorimetry test showed that the long chain branches (LCBs) act as a nucleating agent in the crystallization of the HMSPP, which leads to a high crystallization temperature and crystallinity. Furthermore, the LCB efficiency of the HMSPP can also be calculated by analyzing its rheological property. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics Engineers     

基于OpenGL和MFC的石油井管道的绘制

介绍了O penGL的知识和石油井的基本概念,利用O penGL实现石油井管道的绘制,包括石油井数据的变换和管道起始点的跟踪和角度的旋转。纹理光照效果增强图形生动性,交互操作改变图形视角。并且利用DAO数据库和L istv iew控件实现数据保存和修改。该程序能够完成石油井的管道绘制和数据保存。     

Tri-Gate Bulk MOSFET Design for CMOS Scaling to the End of the Roadmap

A tri-gate bulk MOSFET design utilizing a low-aspect-ratio channel is proposed to provide an evolutionary pathway for CMOS scaling to the end of the roadmap. 3-D device simulations indicate that this design offers the advantages of a multi-gate FET (reduced variability in performance and improved scalability) together with the advantages of a conventional planar MOSFET (low substrate cost and capability for dynamic threshold-voltage control).     

Evolving artificial neural network ensembles

Using a coordinated group of simple solvers to tackle a complex problem is not an entirely new idea. Its root could be traced back hundreds of years ago when ancient Chinese suggested a team approach to problem solving. For a long time, engineers have used the divide-and-conquer strategy to decompose a complex problem into simpler sub-problems and then solve them by a group of solvers. However, knowing the best way to divide a complex problem into simpler ones relies heavily on the available domain knowledge. It is often a manual process by an experienced engineer. There have been few automatic divide-and-conquer methods reported in the literature. Fortunately, evolutionary computation provides some of the interesting avenues to automatic divide-and-conquer methods. An in-depth study of such methods reveals that there is a deep underlying connection between evolutionary computation and ANN ensembles. Ideas in one area can be usefully transferred into another in producing effective algorithms. For example, using speciation to create and maintain diversity had inspired the development of negative correlation learning for ANN ensembles, and an in-depth study of diversity in ensembles. This paper will review some of the recent work in evolutionary approaches to designing ANN ensembles.     

Structured optimal and robust control with multiple criteria: a convex solution

In this paper, the design of controllers that incorporate structural and multiobjective performance requirements is considered. The control structures under study cover nested, chained, hierarchical, delayed interaction and communications, and symmetric systems. Such structures are strongly related to several modern-day and future applications including integrated flight propulsion systems, platoons of vehicles, micro-electro-mechanical systems, networked control, control of networks, production lines and chemical processes. It is shown that the system classes presented have the common feature that all stabilizing controllers can be characterized by convex constraints on the Youla-Kucera parameter. Using this feature, a solution to a general optimal performance problem that incorporates time domain and frequency domain constraints is obtained. A synthesis procedure is provided which at every step yields a feasible controller together with a measure of its performance with respect to the optimal. Convergence to the optimal performance is established. An example of a multinode network congestion control problem is provided that illustrates the effectiveness of the developed methodology.