meso-四（3-三氟甲基苯基）卟啉与锌的微波催化显色反应的研究

研究了用新显色剂meso-四(3-三氟甲基苯基)卟啉(T(3-TFMP)P)光度法测定痕量锌(Ⅱ)时微波对于显色反应的催化作用和微波操作条件.实验表明,在pH 10.8的缓冲液、Tween-80及盐酸羟胺介质中,经微波加热50 min,显色反应完全,锌(Ⅱ)量在0～4.0 μg/25 mL范围内具有线性关系,表观摩尔吸光系数ε429为5.13×105 L·mol<-1·cm-1.采用加入CyDTA进行退色光度法测定,同时加入混合掩蔽剂,可以消除大多数共存离子的干扰.方法可应用于三甘醇和保健品中痕量锌(Ⅱ)的测定.     

浅谈项目的形象包装

对房地产项目的样板房包装、售楼部包装及包装应注意的问题进行了论述,同时介绍了楼盘包装的内容及具体的包装策略,并指出楼盘的销售推广是房地产项目开发后期的关键环节,其成效直接影响到投资项目的市场价值实现.     

错金工艺及对其运用的探讨

为了继承和发扬错金工艺，从其定义出发，探讨了该工艺在中国古代及国外的发展与应用以及笔者对该工艺的实验研究。针对在错金工艺实践过程中出现的问题，在查阅了相关的资料后，对传统错金工艺的实现方法提出了质疑。     

一种基于像素自适应仲裁的OSD分层混合结构设计

数据混合是OSD分层显示的关键技术之一.本文基于OSD的分层结构及数据组织结构特点,提出一种OSD分层显示的单混合结构,该结构采用基于像素自适应仲裁的策略,按照层优先级次序,对多个OSD图层信号实时地切换显示.FPGA验证结果表明,该结构在满足OSD分层混合显示、实现菜单选择鼠标控制等高级人机对话功能的前提下,其硬件资源开销比多混合结构节省约33%以上,且具有良好的层次可扩展性和操作灵活性.     

Organic‐acid‐catalyzed sol–gel route for preparing poly(methyl methacrylate)–silica hybrid materials

In this study, a series of organic–inorganic hybrid sol–gel materials consisting of a poly(methyl methacrylate) (PMMA) matrix and dispersed silica (SiO₂) particles were successfully prepared through an organic‐acid‐catalyzed sol–gel route with N‐methyl‐2‐pyrrolidone as the mixing solvent. The as‐synthesized PMMA–SiO₂ nanocomposites were subsequently characterized with Fourier transform infrared spectroscopy and transmission electron microscopy. The solid phase of organic camphor sulfonic acid was employed to catalyze the hydrolysis and condensation (i.e., sol–gel reactions) of tetraethyl orthosilicate in the PMMA matrix. The formation of the hybrid membranes was beneficial for the physical properties at low SiO₂ loadings, especially for enhanced mechanical strength and gas barrier properties, in comparison with the neat PMMA. The effects of material composition on the thermal stability, thermal conductivity, mechanical strength, molecular permeability, optical clarity, and surface morphology of the as‐prepared hybrid PMMA–SiO₂ nanocomposites in the form of membranes were investigated with thermogravimetric analysis, differential scanning calorimetry, dynamic mechanical analysis, gas permeability analysis, ultraviolet–visible transmission spectroscopy, and atomic force microscopy, respectively. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and characterization of novel copolymer containing pyridylazo-2-naphthoxyl group via reversible addition–fragmentation chain transfer (RAFT) polymerization

A novel monomer containing pyridylazo-2-naphthoxyl group, 1-(1-(4-vinylbenzyloxy)naphthalen-2-yl)-2-(pyridin-2-yl)diazene (VBNPA), was successfully synthesized and copolymerized with styrene (St) in N,N-dimethyl formamide (DMF) via reversible addition–fragmentation chain transfer (RAFT) polymerization using 2-cyanoprop-2-yl-1-dithionaphthalate (CPDN) as RAFT agent. The polymerization behavior exhibited “living”/controlled characters. The obtained copolymer, poly(St-co-VBNPA), with pre-determinable molecular weight and narrow molecular weight distribution can be used as a carrier in metal ion detection and analysis via pre-concentration technique. The copolymer–metal ion (copper (Cu) and europium (Eu)) complexes were prepared and characterized.     

Enhanced Topology Error Processing via Optimal Measurement Design

Topology errors constitute one of the significant source of problems for today's state estimators. They may cause significant biases in state estimation solutions and may occasionally lead to divergence of the numerical solution algorithms. Existing methods of detecting and identifying topology errors rely on the measurement residuals which are in turn dependent on the measurement configuration and network topology. Hence, the capability to effectively process topology errors is closely linked to proper measurement design. In particular, detection of a topology error associated with a given branch may or may not be possible depending upon the existing measurement configuration. Hence, it is possible to efficiently improve the topology error processing capability for a given system by strategically placing few extra measurements. In this paper, a systematic procedure will be developed in order to accomplish this by using not only the traditional power flow and injection measurements but also the newly emerging phasor measurement units (PMUs). Numerical examples will be provided in order to illustrate the proposed measurement placement strategy.      

"摩圣"技术在空气压缩机上的应用

介绍了4L-20/8型空气压缩机采用"摩圣"技术后的运行情况。"摩圣"技术在设备正常运行条件下能成功修复摩擦副的磨损,使之恢复原设计的尺寸和要求,因而提高了生产效率,取得了显著的经济效益。