Cataract extraction comparative study of ocular Beh?et's disease and idiopathic uveitis

A retrospective clinical trial was performed to review the management and discuss the outcome of cataract extraction in eyes with complicated cataract due to ocular Beh?et's disease (BD) (n = 55) and idiopathic uveitis (IU) (n = 43). The aim was to find the best method of treatment in each pathology. The surgical methods were intracapsular cataract extraction (ICCE), extracapsular cataract extraction (ECCE), ECCE + intraocular lens (ECCE + IOL), and ECCE + trabeculectomy (ECCE + T). The postoperative visual prognosis was found to be significantly worse in eyes with ocular BD, than in those with IU because of the severe posterior segment complications of ocular BD, particularly optic atrophy (p < 0.05). When the outcome was evaluated with regard to the individual surgical techniques, the prognosis was found to be significantly better in eyes with IU undergoing ECCE than in those with BD undergoing the same operation (p < 0.05). No significant differences were observed between the groups with regard to the other surgical treatment modalities (p < 0.05).     

A Practical Space-Code Correlator Receiver for DSP Based Software Radio Implementation in CDMA2000

Development of practical algorithms for beamforming in 3G CDMA systems and their software radio implementations are still a challenging task, which will facilitate upgrading of traditional base stations into smart antenna capable 3G base stations. In this paper, we propose a practical space-code correlator (SCC) receiver structure for its software radio implementation a DSP. SCC’s advantage comes from the fact that it doesn’t require any training sequence or learning parameter as in other algorithms (LMS or CM). DSP implementations of the SCC are performed using Texas Instruments C67xx family platforms. In the simulations, reverse link base band signal format of CDMA2000 is used and the effects of different array topologies (uniform linear array-ULA or uniform circular array-UCA) are considered. The implementation results regarding beamforming accuracy, weight vector computation time (execution time), search resolution effect on DOA estimation accuracy, DSP resource utilization, and received SINR are presented. The results show that DSP based SCC beamformer can estimate weight vectors within less than 10 ms with DOA search resolution of 2° especially when C6713 DSP is used. With faster DSPs and larger search resolutions, execution time could be significantly reduced as well. It provides comparable SINR performance with LMS and CM algorithms.

Fundamental-Frequency-Modulated Six-Level Diode-Clamped Multilevel Inverter for Three-Phase Stand-Alone Photovoltaic System

This paper presents a fundamental-frequency-modulated diode-clamped multilevel inverter (DCMLI) scheme for a three-phase stand-alone photovoltaic (PV) system. The system consists of five series-connected PV modules, a six-level DCMLI generating fundamental-modulation staircase three-phase output voltages, and a three-phase induction motor as the load. In order to validate the proposed concept, simulation studies and experimental measurements using a small-scale laboratory prototype are also presented. The results show the feasibility of the fundamental frequency switching application in three-phase stand-alone PV power systems.     

Opportunistic Beamforming over Rayleigh Channels with Partial Side Information

In recent years, diversity techniques have evolved into highly attractive technology for wireless communications in different forms. For instance, the channel fluctuations of the users in a network are exploited as multiuser diversity by scheduling the user with the best signal-to-noise ratio (SNR). When fading is slow, beamforming at a multiple antenna transmitter is used to induce artificial channel fluctuations to ensure multiuser diversity in the network. Such a beamforming scheme is called opportunistic beamforming since the transmitter uses random beamforming to artificially induce opportunism in the network [1]. Opportunism requires a large number of users in the system in order to reach the performance of the true beamforming that uses perfect channel state information (CSI). In this paper we investigate the benefit of having partial CSI at an opportunistic transmitter. In the investigation, we focus on the maximum normalized SNR scheduling where user?s feedback consists of SNR relative to its channel gain. We show that opportunism can be beneficially used to increase the average throughput of the system. Simulations support the analytical average throughput results obtained as the amount of CSI and the number of users vary.     

Control of a 3-phase 4-leg active power filter under non-ideal mains voltage condition

In this paper, instantaneous reactive power theory (IRP), also known as p–q theory based a new control algorithm is proposed for 3-phase 4-wire and 4-leg shunt active power filter (APF) to suppress harmonic currents, compensate reactive power and neutral line current and balance the load currents under unbalanced non-linear load and non-ideal mains voltage conditions. The APF is composed from 4-leg voltage source inverter (VSI) with a common DC-link capacitor and hysteresis–band PWM current controller. In order to show validity of the proposed control algorithm, compared conventional p–q and p–q–r theory, four different cases such as ideal and unbalanced and balanced-distorted and unbalanced-distorted mains voltage conditions are considered and then simulated. All simulations are performed by using Matlab-Simulink Power System Blockset. The performance of the 4-leg APF with the proposed control algorithm is found considerably effective and adequate to compensate harmonics, reactive power and neutral current and balance load currents under all non-ideal mains voltage scenarios.     

A system-wide approach to minimize the operational cost of bench production in open-cast mining operations

International Journal of Coal Science & Technology - The production cycle of open-cast coal mines generally includes drilling, blasting, loading, hauling and coal preparation activities....     

Dry powders for the inhalation of ciprofloxacin or levofloxacin combined with a mucolytic agent for cystic fibrosis patients

Objective: This study aimed to design and characterize an inhalable dry powder of ciprofloxacin or levofloxacin combined with the mucolytics acetylcysteine and dornase alfa for the management of pulmonary infections in patients with cystic fibrosis.

Methods: Ball milling, homogenization in isopropyl alcohol and spray drying processes were used to prepare dry powders for inhalation. Physico-chemical characteristics of the dry powders were assessed via thermogravimetric analysis, differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FT-IR), X-ray diffractometry and scanning electron microscopy. The particle size distribution, dissolution rate and permeability across Calu-3 cell monolayers were analyzed. The aerodynamic parameters of dry powders were determined using the Andersen cascade impactor (ACI).

Results: After the micronization process, the particle sizes of the raw materials significantly decreased. X-ray and DSC results indicated that although ciprofloxacin showed no changes in its crystal structure, the structure of levofloxacin became amorphous after the micronization process. FT-IR spectra exhibited the characteristic peaks for ciprofloxacin and levofloxacin in all formulations. The dissolution rates of micro-homogenized and spray-dried ciprofloxacin were higher than that of untreated ciprofloxacin. ACI results showed that all formulations had a mass median aerodynamic diameter less than 5?μm; however, levofloxacin microparticles showed higher respirability than ciprofloxacin powders did. The permeability of levofloxacin was higher than those of the ciprofloxacin formulations.

Conclusion: Together, our study showed that these methods could suitably characterize antibiotic and mucolytic-containing dry powder inhalers.     

An antibacterial composite system based on multi-responsive microgels hosting monodisperse gold nanoparticles

A multi-responsive microgel having response to pH, temperature, and salt concentration was successfully prepared using a water-soluble monomer. Microgels were readily prepared from 2-(N-morpholino)ethyl methacrylate (MEMA) via emulsion polymerization using glycidyl methacrylate as a comonomer cross-linker. The morpholino groups of MEMA residues of microgels were able to give complexation with metal containing anions such as AuCl₄ ^? in acidic conditions. The reduction of aurate ions with sodium borohydride led to immobilized-gold nanoparticles (AuNP) in the microgel system. Average particle diameters of AuNPs were determined to be 10 ± 2 nm. The resulting AuNP-microgel system was examined as a nanoreactor for catalyst system and determined to be very effective in the reduction of 4-nitrophenol model reaction in aqueous media. AuNPs-microgel composite system had antibacterial properties against several Gram-positive and Gram-negative bacteria similar to amoxicillin. This P(MEMA-co-GMA) microgel is also very useful for different applications such as a host for metal nanoparticle production, a drug carrier or drug delivery system.     

Physical polymer surface modification methods and applications in food packaging polymers.

Continued innovations in the polymer industry have made polymer surface modification methods a subject of intense research. The importance and necessity of surface modification of plastics are explained, and the advantages of physical surface treatments over the less-sophisticated chemical methods are outlined. Currently available physical surface modification methods for food packaging polymers are reviewed from the food packaging perspective. These physical surface modification methods include flame, corona discharge, UV, gamma-ray, electron beam, ion beam, plasma, and laser treatments. The principle of operation of each method is briefly described, and the advantages and disadvantages of each technique are cited. The extent to which each of these methods can produce the specific modifications desired is discussed. Furthermore, the effects of each treatment on barrier, mechanical, and adhesion properties of food packaging polymers are also examined. Finally, an overview of economic aspects of sophisticated surface modification techniques, including ion beam, plasma, and laser treatments, is presented.