椰油酸单乙醇酰胺磷酸酯的制备及性能研究

以椰油酸甲酯、单乙醇胺，Ｐ２Ｏ５等为原料制备一种新型阴离子表面活性剂－烷醇酰胺磷酸酯盐。初步探讨了工艺条件，测定了其物化性能。     

自适应有源噪声控制的滤波-LMAD算法

本文研究了稳定非高斯环境下的自适应有源噪声控制问题，提出了滤波－ＬＭＡＤ（ｌｅａｓｔｍｅａｎａｂｓｏｌｕｔｅｄｅｖｉａｔｉｏｎ）算法及归一化滤波－ＬＭＡＤ算法，仿真结果表明，与常用的滤波－ＬＭＳ算法和归－化滤波－ＬＭＳ算法相比，本文提出了算法收敛速度更快。     

自韧Si3N4陶瓷的显微结构及其性能研究

利用热压的方法制得室温断裂韧性和抗弯强度分别为１１．２ＭＰａ·ｍ￣（１／２）、８２３ＭＰａ，高温（１３５０℃）断裂韧性和抗弯强度分别为２３．９ＭＰａ·ｍ￣（１／２）、６３０ＭＰａ的自韧Ｓｉ＿３Ｎ＿４陶瓷。研究了显微结构和力学性能之间的关系。结果表明：玻璃相的含量、β－Ｓｉ＿３Ｎ＿４的长径比等对性能有重要影响。分析了自韧Ｓｉ＿３Ｎ＿４陶瓷的增韧机理，通过ＳＥＭ明显观察到Ｓｉ＿３Ｎ＿４中存在裂纹偏转、分支和β－Ｓｉ＿３Ｎ＿４拔出现象。     

光盘用光学头物镜性能的综合评估

论述了采用波象差均方根、点扩展函数、光学传递函数对高次旋转对称非球面光学头物镜性能进行综合评估的方法。作者在正则坐标理论基础〔１〕上编制了光学头物镜性能综合评估软件。给出了评估实例。     

自身相位噪声测量的分析

本文分析一种不需要参考（标准）信号源的相位噪声测量系统，该系统在被测通道里插入窄带晶体滤波器滤除被测信号的大部分噪声，作为参考信号再与被测信号进行比较，实现了信号源自身相位噪声的测量．本文还介绍一种自动相位噪声谱测量装置     

Delayed delivery of surviving triplet after fetal reduction and spontaneous abortion

In multiple pregnancies, survival of remaining fetuses after premature death and delivery of one fetus is uncommon. We report a case of a triplet pregnancy that was reduced to twins at the 14th gestational week and then had preterm premature rupture of membranes and intrauterine fetal death of one twin at the 17th gestational week. To save the surviving fetus, delivery of the dead fetus and ligation of the umbilical cord at the cervical level were performed. We also performed McDonald cervical cerclage to keep the placenta of the dead fetus as well as that of the surviving one in the uterine cavity. After a series of aggressive procedures, including immediate administration of tocolytic agents, and antibiotic prophylaxis to prevent infection and preterm labor, the surviving fetus was delivered vaginally 73 days later due to intractable uterine contractions. After a 10-week hospital stay, the infant boy, weighing 2,500 g, was discharged without any sequelae. To our knowledge, this was the longest interval between deliveries in a triplet pregnancy reported in Taiwan. With adequate intensive management, a satisfactory outcome of the fetus and mother in such cases is possible.     

高温过热器12Cr2MoWVTib（102）钢管的显微组织和相结构分析

本文对原始状态和在火力发电厂使用不同时间的高这热器１０２钢管进行了显微组织和相结构变化规律的探讨和研究。显微组织研究表明，１０２钢管在高温高压下长期运行过程中，使用温度对显微组织和碳化物相有明显影响，而使用时间对其影响不如温度影响强烈。碳化物颗粒图象分析表明，碳化物随着使用时间缓慢长大，而新的碳化物不沉淀，使颗粒总数不断增加，颗粒，间距逐渐缩小。Ｘ射线衍射数据证明，钢管在高温长期使用过程中，ＭＣ相     

行为级DSP算法描述的阵列处理器综合方法研究

本文提出了针对递归DSP算法的高层次系统综合流程,并以脉动(systolic)式处理器阵列结构实现.从DSP算法的FDDL行为级描述开始,经由编译及划分,产生数据相关流图(Data Dependency Graph),然后实现对算法流图的空间映射及时域规划,得到算法的信号流图(Signal Flow Graph),经时序重构,生成脉动阵列,最后实现对处理器单元的数据路径综合及控制器综合,并对处理器单元定位,本文同时提出了各设计阶段的算法策略及优化策略,并给出综合结果。     

Failure probability evaluation for normally distributed load-strength model with unknown parameters

The failure probability evaluation methods for load-strength interference model are established when both load, L, and strength, S, follow normal distributions, assuming none of the normal distribution parameters are known. Based on Fisher's fiducial analysis, a failure probability evaluation method is obtained for single load application. A numerical integration method is developed to evaluate the failure probability for multiple load applications.