后浇带质量控制的措施

后浇带起着超长建筑的温度伸缩、高层建筑高层部分与裙房间沉降缝的作用,已普遍采用,但有些工程由于施工不当,设了后浇带起不到应有作用,本文就施工中如何采取有效措施,对后浇带的质量进行控制,作了探讨,以期能真正发挥后浇带的作用。     

拉西瓦高拱坝岩体力学、工程地质研究成果综述

拉西瓦水电站高拱坝建基岩体工程地质、岩体力学研究是中国水电顾问集团2004年度专题科研成果之一“高混凝土拱坝建基岩体工程地质、岩体力学综合研究”的主要成果,其重点内容为岩体风化、卸荷、岩体质量级别的定量划分、河谷应力场分带、建基岩体主要岩体力学参数研究,坝肩抗滑稳定、开挖后综合检测验证等;在理论探讨、方法实践、预测验证和创新尝试等方面取得了一定成果,具有一定的社会、经济效益。     

添加尖晶石对氧化锌压敏电阻性能的影响

通过添加尖晶石（Ｚｎ７Ｓｂ２Ｏ（１２））改性研制出电位梯度为１００Ｖ／ｍｍ左右，压敏电压在８２～１５０Ｖ，通流容量可达１６００Ａ／ｃｍ２，漏电流＜２μＡ系列压敏电阻器，从而满足了国内电话交换机行业对８２Ｖ、１００Ｖ、１２０Ｖ、１５０Ｖ压敏电阻器的电性能要求。从工艺的角度解释了尖晶石对氧化锌瓷晶粒的作用原理，并分析了尖晶石的微观结构及粒度对瓷片电性能的影响。     

Real-time homogenous translucent material editing

This paper presents a novel method for real-time homogenous translucent material editing under fixed illumination. We consider the complete analytic BSSRDF model proposed by Jensen et al. [ [JMLH01] ], including both multiple scattering and single scattering. Our method allows the user to adjust the analytic parameters of BSSRDF and provides high-quality, real-time rendering feedback. Inspired by recently developed Precomputed Radiance Transfer (PRT) techniques, we approximate both the multiple scattering diffuse reflectance function and the single scattering exponential attenuation function in the analytic model using basis functions, so that re-computing the outgoing radiance at each vertex as parameters change reduces to simple dot products. In addition, using a non-uniform piecewise polynomial basis, we are able to achieve smaller approximation error than using bases adopted in previous PRT-based works, such as spherical harmonics and wavelets. Using hardware acceleration, we demonstrate that our system generates images comparable to [ [JMLH01] ]at real-time frame-rates.     

Parasitic Bipolar Junction Transistors in a Floating-Gate MOSFET for Fluorescence Detection

In this letter, we examined whether the parasitic bipolar junction transistors (BJTs) in the MOSFET fabricated by the standard CMOS process can play a role as a fluorescence detector. To suppress the action of two vertical parasitic BJTs, the gate and n-well were tied in the parasitic BJTs, and the body node was connected to the drain. The proposed device was compared with the inherent and the parasitic diodes in the MOSFET. It had 100 times higher photocurrents than the diodes in the MOSFET. In addition, it was applied for the detection of the fluorescent signal, and could detect near 10 nM of Alexa 546. Therefore, CMOS-process-compatible parasitic BJTs can be used as a photodetector in an integrated fluorescence detector.     

Preparations of nanosized TiO2 in reverse microemulsion and their photocatalytic activity

Nanosized titania sol has been produced by the controlled hydrolysis of titanium tetraisopropoxide (TTIP) in sodium bis(2-ethylhexyl)sulfosuccinate (AOT) reverse micelles. The physical properties, such as surface area, crystallite size and crystallinity according to R and W₀ ratio, have been investigated by TEM, XRD, BET, FT–IR, TGA and DTA. In addition, the photocatalytic decomposition of p-nitrophenol has been studied by using a batch reactor in the presence of UV light in order to compare the photocatalytic activity of prepared nanosized titania. It is shown that the anatase structure appears in the 300–600 °C calcination temperature range and the transformation of anatase into rutile starts above 700 °C. The crystallite size increases with increasing R and W₀ ratio but W₀ ratio shows a stronger effect on the crystallite size than R ratio. In the photocatalytic decomposition of p-nitrophenol, the photocatalytic activity is mainly determined by the crystallinity of titania. In addition, the titania calcined at 500 °C shows the highest activity on the photocatalytic decomposition of p-nitrophenol() and the pure anatase structure.     

复杂形体目标激光散射特征测量系统的研制

复杂形体目标激光散射特征的测量系统中，利用反射式离轴光路满足了可见到远红外波段的测量需要，通过大孔径（250mm）物方远心接收光路实现了对实际远场的模拟测量，以光滑镀金球体作为标准器，可直接获得任意目标散射截面的绝对值。在0．6328、1．06和10．6μm三个波段针对标准器的实测结果表明，平均误差小于4．95％。     

An online multiple object tracker based on structure keeper net

We propose a novel online multiple object tracker taking structure information into account. State-of-the-art multi-object tracking (MOT) approaches commonly focus on discriminative appearance features, while neglect in different levels structure information and the core of data association. Addressing this, we design a new tracker fully exploiting structure information and encoding such information into the cost function of the graph matching model. Firstly, a new measurement is proposed to compare the structure similarity of two graphs whose nodes are equal. With this measurement, we define a complete matching which performs association in high efficiency. Secondly, for incomplete matching scenarios, a structure keeper net (SKnet) is designed to adaptively establish the graph for matching. Finally, we conduct extensive experiments on benchmarks including MOT2015 and MOT17. The results demonstrate the competitiveness and practicability of our tracker.

     

Weber定律下尺度空间的自适应构建

在Weber定律的启发下提出一种基于"恰可识别差异"的尺度空间自适应构建方法。Weber定律认为人类感知模式不仅与刺激的变化有关,而且与原刺激强度有关。基于此观点,在图像尺度空间的构建过程中,首先以Marr视觉理论的屋脊型边缘和阶梯型边缘的特征之和计算图像的信息量,再通过实验获得人类视觉能感知到"恰可识别差异"时的图像信息量变化,最后通过曲线拟合自适应构建图像的尺度空间。实验结果表明,该方法充分体现了人类视觉感知特性,与其他尺度空间构建方法相比,在目标匹配实验中,匹配数目提升了25%以上;在去噪实验中,本算法的去噪效果良好。     

带有弯曲静子的压气机数值仿真

针对某两级低速轴流压气机第一级静子通道小流量范围内存在轮毂-角区失速现象,为了提高压气机的效率,采用计算流体力学方法,对第一级静子进行了不同的弯曲变化数值仿真,分析研究了静子弯曲对压气机性能和轮毂-角区失速的影响。结果表明,弯曲叶片能够通过改变静子轮毂表面静压分布,减缓低能流体的横向流动,从而有效地抑制小流量范围内的轮毂-角区失速,压气机的压比和效率得到较大的提升。