Photodetectors monolithically integrated on SOI substrate foroptical pickup using blue or near-infrared semiconductor laser

We made photodetectors on a silicon-on-insulator (SOI) substrate by a 0.35-μm BiCMOS fabrication process to detect the signal light used in an optical disk system. Investigating their characteristics at two wavelengths, 410 and 780 nm, for different structures, we found that the thickness of the silicon crystalline layer on the insulator strongly affected the frequency response at the longer wavelength, while the cutoff frequency was over 500 MHz for the shorter wavelength. We also simulated the frequency response     

A CMOS multichannel 10-Gb/s transceiver

We describe a CMOS multichannel transceiver that transmits and receives 10 Gb/s per channel over balanced copper media. The transceiver consists of two identical 10-Gb/s modules. Each module operates off a single 1.2-V supply and has a single 5-GHz phase-locked loop to supply a reference clock to two transmitter (Tx) channels and two receiver (Rx) channels. To track the input-signal phase, the Rx channel has a clock recovery unit (CRU), which uses a phase-interpolator-based timing generator and digital loop filter. The CRU can adjust the recovered clock phase with a resolution of 1.56 ps. Two sets of two-channel transceiver units were fabricated in 0.11-/spl mu/m CMOS on a single test chip. The transceiver unit size was 1.6 mm /spl times/ 2.6 mm. The Rx sensitivity was 120-mVp-p differential with a 70-ps phase margin for a common-mode voltage ranging from 0.6 to 1.0 V. The evaluated jitter tolerance curve met the OC-192 specification.     

Incentive‐rewarding mechanism to stimulate activities in social networking services

We have developed an incentive‐rewarding mechanism that stimulates activities in social networking services (SNSs), including content uploading and link establishment. We particularly focus on changing the reward assignment ratio based on the different risks users perceive when uploading content with different privacy settings: public‐open and friend‐limited. Learning‐based simulation allowed us to observe that SNS activity, which we measured as the amount of browsed content within a certain period, can be controlled by a rewarding assignment ratio. We then analyzed how the amount of uploaded content and the increase of established links affect SNS activity. Results suggested that the optimal reward assignment ratio to maximize SNS activity changes depending on the total amount of available reward resources. Copyright © 2011 John Wiley & Sons, Ltd.     

Living activity recognition using off-the-shelf sensors on mobile phones

In aging societies, such as that of Japan, there is growing awareness that robotic technology has the potential to help both physical and mental labor. To take an example of mental labor, the robotic technology can contribute as an interface to home electric appliances and a conversation partner with interactive communication. In this case, it is important to recognize the elderly user’s activities for not only watching-over services but also improving the quality of the conversation. We propose a low-throughput recognition method for in-home living activity recognition using only off-the-shelf sensors, namely an accelerometer and a microphone, which are commonly applied in mobile phones. The system can determine whether the user is walking, quiet, or performing a task by acceleration sensing, and then in the latter case, acoustic sensing can be used to classify the nature of the task that the user is performing. We conducted two experiments to confirm the feasibility of the proposed method. As a result of the first experiment, three movement conditions are classified with more than 95?% accuracy by acceleration sensing: walking, quiet, or performing a task. And it classified the nature of the task into brushing teeth, shaving, drying the hair with a hairdryer, flushing the toilet, vacuuming, washing the dishes, and ironing with 75.8?% accuracy by acoustic sensing and improved the accuracy to 85.9?% by training with only the subject’s own data. Moreover, the result of the second experiment shows that it is effective to adopt instance-based recognition which is an additional recognition scheme per each continuous task, according to the assumed application.     

Microbial synthesis and properties of poly(3-hydroxybutyrate-co-4-hydroxybutyrate)

Microbial synthesis of copolymers of [R]-3-hydroxybutyrate (3HB) and 4-hydroxybutyrate (4HB), P(3HB-co-4HB), by Alcaligenes eutrophus, Alcaligenes latus, and Comamonas acidovorans from various carbon sources has been studied. The copolyester compositions varied from 0 to 100 mol% 4HB, depending on the microorganism and the combination of carbon substrates supplied. The thermal and physical properties of compositions with 0–100 mol% 4HB were investigated. The copolyesters represented a wide variety of polymeric materials, from hard crystalline plastic to very elastic rubbers, depending on composition. The copolyester films with high 4HB fractions (64–100 mol% 4HB) exhibited the characteristics of a thermoplastic elastomer, and the tensile strength increased from 17 to 104 MPa as the 4HB fraction increased. The enzymatic degradation of P(3HB-co-4HB) films was studied in an aqueous solution of extracellular polyhydroxybutyrate (PHB) depolymerase from Alcaligenes faecalis or lipase from Rhizopus delemer. The erosion rate of P(3HB-co-4HB) films was strongly dependent on the copolymer composition. In addition, environmental degradation of P(3HB-co-4HB) films in sea water was investigated.     

Ectopic primary pleural thymoma: report of a case

We herein report an 83-year-old man who presented with a pleural tumor in the right thorax. The tumor was surgically resected and histopathologically diagnosed as ectopic primary pleural thymoma lacking any evidence of a mediastinal tumor. The clinicopathological aspects of this unusual thymoma are also discussed.     

Stabilization effect of Co for Mo phase in CoMoAl2O3 hydrodesulfurization catalysts studied with X-Ray photoelectron spectroscopy

The promotional effects of Co in $\text{CoMo}\text{Al}{}_2\text{O}{}_3$ hydrodesulfurization (HDS) catalysts were studied by means of X-ray photoelectron spectroscopy. The higher MoO₃-content $\text{Mo}\text{Al}{}_2\text{O}{}_3$ catalysts (10 and 20 wt% MoO₃) contain mobile Mo, which migrates from the pores to the outermost surface layers of the catalysts and segregates to form less active crystalline MoS₂ during the HDS reaction, while in the case of $\text{Mo}\text{Al}{}_2\text{O}{}_3$ (5 wt% MoO₃) catalyst: no migration of Mo was observed. It is revealed that the Co in $\text{CoMo}\text{Al}{}_2\text{O}{}_3$ catalyst inhibits the migration and segregation of Mo and that it keeps Mo effective for the HDS reaction, since no surface enrichment of Mo was observed. It is concluded that stabilization of the Mo monomolecular layer is the main role of Co. The active species of Mo is suggested to have the composition of S/Mo(IV) = 1 on the basis of the sulfur contents of the catalysts under the mild HDS reaction conditions.     

Estimation of the Surface Energy of Polymer Solids

The methods to estimate the surface tension of polymer solids using contact angles have been reviewed in the first part. They are classified into the following three groups depending on the theories or the equations applied: (1) the methods using the Young's equation alone, (2) the methods using the combined equation of Young and Good-Girifalco, and (3) the methods using the equations of work of adhesion. Some notes and comments are given for each method and results are compared with each other. The two-liquids method for rather high energy surface is also introduced.

Next, some new possibilities to evaluate the surface tension of polymer solids are presented by our new contact angle theory in consideration of the friction between a liquid drop and a solid surface. The advancing and receding angles of contact (θ _a and θ _r ) are explained by the frictional tension γ_F and accordingly two kinds of the critical surface tension γ_C (γ_Ca and γ_Cr ) are given.

This work has shown that one of the recommendable ways to evaluate γ_S is either the maximum γ_LV cos θ_a or the maximum γ_C using the advancing contact angle θ_a alone, and another way is the arithmetic or the harmonic mean of the γ_Ca and γ_Cr . A depiction to determine the γ_C such as ln(1 + cos θ₀ ) vs. γ_LV with cos θ₀ = (cos θ₀ + cos θ_r )/2 has also been proposed.     

Electro-mechanical coupling in ionic gels

An ionic-polymer–metal-composite film shows electro-mechanical coupling. When the film is bent, electric current is induced. Measurement of the induced current indicates that the current depends on the speed of bending, but the total amount of the charge transferred across the film is independent of the speed, and depends only on the magnitude of the bending. The result indicates that in addition to previously proposed dynamical coupling effect, there is a static electro-mechanical coupling effect. Mathematical model is proposed to describe this phenomena.     

Sonochemical Preparation and Properties of Pt–3Y-TZP Nano-Composites

A uniformly aggregated 3 mol% yttria-stabilized tetragonal zirconia nano-powder (3Y-TZP) was prepared using thermal hydrolysis and the ultrasonic deagglomeration technique. The possibility of nano-engineering of Pt–3Y-TZP composite aggregates was studied. The as-synthesized Pt nano-particles (∼2 nm) were impregnated into zirconia nano-aggregates (20–45 nm). The morphology manipulation technique allowed production of the composite zirconia-based aggregates in which a significant fraction of the Pt particles was embedded into the densified zirconia aggregates. Using the colloidal technique and low-temperature (1150°C) sintering, we prepared the Pt-zirconia (0.5–1.5 wt% of platinum) nano-composites with average 3Y-TZP grain sizes of 120 nm, and with the platinum grains size in the range of 20–60 nm. The catalytic properties of composite Pt–3Y-TZP nano-composites were studied and described.