When reaction-bonded silicon nitride containing MgO/Y2O3 additives is sintered at three different temperatures to form sintered reaction-bonded silicon nitride (SRBSN), the thermal conductivity increases with sintering temperature. The β-Si3N4 (silicon nitride) crystals of SRBSN ceramics were synthesized and characterized to investigate the relation between the crystal structure and the lattice oxygen content. The hot-gas extraction measurement result and the crystal structure obtained using Rietveld analysis suggested that the unit cell size of the β-Si3N4 crystal increases with the decrease in the lattice oxygen content. This result is reasonable considering that the lattice oxygen with the smaller covalent radius substitutes nitrogen with the larger one in the β-Si3N4 crystals. The lattice oxygen content decreased with increasing sintering temperature which also correlated with increase in thermal conductivity. Moreover, it is noteworthy from the viewpoint that it may be possible to apply the lattice constant analysis for the nondestructive and simple measurement of the lattice oxygen content that deteriorates the thermal conductivity of the β-Si3N4 ceramics. 相似文献
Al etching was studied employing negative ions generated in downstream Cl2 plasma. The Al etch rate by the alternate irradiation of positive and negative ions was two times higher than that by usual
positive ions. In order to etch the Al film practically on an insulator covered electrode coupled with RF power, reduction
of the negative self bias voltage (Vdc) was examined using a magnetic filter which traps electrons. The reason for the high
etching reactivity is that the dominant negative ions F in SF6 and Cl− in Cl2 plasmas are atomically very similar to the radicals. Addition of SF6 and H2 to a Cl2/BCl3 mixture reduced Vdc significantly. However, fluorine and hydrogen atoms inhibited Al etching in spite of sufficient ion energy. 相似文献
ABSTRACT Absorbed-dose estimation is essential for evaluation of the radiation tolerance of minor-actinide-separation processes. We propose a dose-evaluation method based on radiation permeability, with comparisons of heterogeneous structures seen in the solvent-extraction process, such as emulsions forming in the mixture of the organic and aqueous phases. A demonstration of radiation-energy-transfer simulation is performed with a focus on the minor-actinide-recovery process from high-level liquid waste with the aid of the Monte Carlo radiation-transport code PHITS. The simulation results indicate that the dose absorbed by the extraction solvent from alpha radiation depends upon the emulsion structure, and that from beta and gamma radiation depends upon the mixer-settler-apparatus size. Non-negligible contributions of well-permeable gamma rays were indicated in terms of the plant operation of the minor-actinide-separation process. 相似文献
The soiling of the slag, spatter and the fume, etc., which come into contact with the steel sheet surface with welding, is cleaned making use of steel sphere shot material of large particle diameter, high projection pressure with strong peening processing (below, called strong peening cleaning). In this research, the cleaning state of the soiling with welding and improvement of fatigue strength of the hot galvanized welded joint was inspected, when the surface of a SM490A welded joint was cleaned with strong peening cleaning. The following experimental results were obtained:
The fatigue limit of smooth base metal which received strong peening cleaning at about 320 MPa was remarkably high in comparison with smooth base metal at about 245 MPa.
The fatigue limit of a welded joint which received strong peening cleaning at about 300 MPa was remarkably high in comparison with a welded joint at about 170 MPa.
The strong peening cleaning was highly efficient and the cleaning state was satisfactory.
The cause of the remarkable rise of the fatigue limit (300 MPa) of the welded joint which received strong peening cleaning was because the fatigue limit (about 170 MPa, 57%) of the welded joint was improved (about 130 MPa, 43%) with peening cleaning. It was considered that improvement effects were: a rise (about 68 MPa, 23%) of hardness of the weld toe; relief (about 43 MPa, 14%) of stress concentration; increase (about 136 MPa, 45%) of compressive residual stress; and the decrease (about ? 96 MPa, ? 32%) by increase of surface roughness.
The fatigue strength of the hot galvanized welded joint decreased remarkably. This was thought to be due to the decrease (about HV40) of hardness of the surface, the decrease (about 188 MPa) of the compressive residual stress and the influence of many factors which accompanied hot galvanizing.
Superoxide dismutase 1 (SOD1) is a metalloenzyme with high structural stability, but a lack of Cu and Zn ions decreases its stability and enhances the likelihood of misfolding, which is a pathological hallmark of amyotrophic lateral sclerosis (ALS). A growing body of evidence has demonstrated that misfolded SOD1 has prion-like properties such as transmissibility between cells and intracellular propagation of misfolding of natively folded SOD1. Recently, we found that SOD1 is misfolded in the cerebrospinal fluid of sporadic ALS patients, providing a route by which misfolded SOD1 spreads via the extracellular environment of the central nervous system. Unlike intracellular misfolded SOD1, it is unknown which extracellular misfolded species is most relevant to prion-like properties. Here, we determined a conformational feature of extracellular misfolded SOD1 that is linked to prion-like properties. Using culture media from motor neuron-like cells, NSC-34, extracellular misfolded wild-type, and four ALS-causing SOD1 mutants were characterized as a metal-free, disulfide oxidized form of SOD1 (apo-SOD1S-S). Extracellular misfolded apo-SOD1S-S exhibited cell-to-cell transmission from the culture medium to recipient cells as well as intracellular propagation of SOD1 misfolding in recipient cells. Furthermore, culture medium containing misfolded apo-SOD1S-S exerted cytotoxicity to motor neuron-like cells, which was blocked by removal of misfolded apo-SOD1S-S from the medium. We conclude that misfolded apo-SOD1S-S is a primary extracellular species that is linked to prion-like properties. 相似文献
The Ba0.5Sr0.5Co0.8Fe0.2O3-δ (BSCF)-based multi-layered oxygen separation membrane was fabricated by the sequential electrophoretic deposition (EPD) process. A thin porous/dense bi-layer of BSCF was formed on a thick porous support of BSCF. The porous support prepared by a sacrificial template method using BSCF powder mixed with wheat starch (30 wt%) as a pore-forming agent, followed by uniaxial pressing and low-temperature sintering, was directly used as an EPD electrode. A thin BSCF layer was first formed on the porous support, and then a thin BSCF + PMMA (polymethyl methacrylate) layer was sequentially formed on the thin BSCF layer using a bimodal suspension of BSCF and PMMA. A 30-μm thin porous/dense bi-layer of BSCF of which the total thickness was obtained by optimizing the processes of EPD and subsequent co-sintering. The oxygen separation performance of 3.7 ml (STP) min?1 cm?2 at 860 °C was achieved for the BSCF-based multi-layered oxygen separation membrane. 相似文献
In recent years, the development of CAE (Computer Aided Engineering) in polymer processing has been remarkable, and it is expected to be more realistic in viscoelastic numerical simulation, particularly in three-dimensional complex geometry. Because of the problems of computational memory capacity, CPU time, and the numerical convergence of viscoelastic flow simulation, three-dimensional viscoelastic simulation applicable to industrial flow behaviors has not yet been attempted. In this paper, we developed the numerical simulation of three-dimensional viscoelastic flow within dies using a decoupled method, streamwise integration, and penalty function methods to decrease memory, and the TME (“Transformation of Equation of Motion to the Elliptic Equation,” S. Tanoue, T. Kajiwara, and K. Funatsu, The Eleventh Annual Meeting, the Polymer Processing Society Seoul, Korea, Extended Abstracts p.439) method, which raises the stability of convergence. We confirmed the reliability of this simulation technique to compare simulation results with experimental data of the stress field at a downstream wall shear rate of 5.41s?1 within a 60° angle tapered contraction die. We compared the predictions of a viscoelastic model (Phan-Thien and Tanner model) with a pure viscosity model (Carreau model) at a downstream wall shear rate of 120s?1 and discovered a remarkable effect of viscoelasticity in the shear stress and first normal stress difference in particular in the tapered region. 相似文献
We have characterized the gene encoding fatty acid α-hydroxylase, a cytochrome P450 (P450) enzyme, from Sphingomonas paucimobilis. A database homology search indicated that the deduced amino acid sequence of this gene product was 44% identical to that
of the ybdT gene product that is a 48 kDa protein of unknown function from Bacillus subtilis. In this study, we cloned the ybdT gene and characterized this gene product using a recombinant enzyme to clarify function of the ybdT gene product. The carbon monoxide difference spectrum of the recombinant enzyme showed the characteristic one of P450. In
the presence of H2O2, the recombinant ybdT gene product hydroxylated myristic acid to produce β-hydroxyristic acid and α-hydroxymyristic acid which were determined
by high-performance liquid chromatography (HPLC) and gas chromatography-mass spectrometry. The amount of these products increased
with increasing reaction period and amount of H2O2 in the reaction mixture. The amount of β-hydroxyl product was slightly higher than that of α-hydroxyl product at all times
during the reaction. However, no reaction products were detected at any time or at any concentration of H2O2 when heat-inactivated enzyme was used. HPLC analysis with a chiral column showed that the β-hydroxyl product was nearly enantiomerically
pure R-form. These results suggest that this P450 enzyme is involved in a novel biosynthesis of β-hydroxy fatty acid. 相似文献