Mutation Analysis of Radioresistant Early-Stage Cervical Cancer

Radiotherapy is a definitive treatment for early-stage cervical cancer; however, a subset of this disease recurs locally, necessitating establishment of predictive biomarkers and treatment strategies. To address this issue, we performed gene panel-based sequencing of 18 stage IB cervical cancers treated with definitive radiotherapy, including two cases of local recurrence, followed by in vitro and in silico analyses. Simultaneous mutations in KRAS and SMAD4 (KRAS^mt/SMAD4^mt) were detected only in a local recurrence case, indicating potential association of this mutation signature with radioresistance. In isogenic cell-based experiments, a combination of activating KRAS mutation and SMAD4 deficiency led to X-ray resistance, whereas either of these factors alone did not. Analysis of genomic data from 55,308 cancers showed a significant trend toward co-occurrence of mutations in KRAS and SMAD4. Gene Set Enrichment Analysis of the Cancer Cell Line Encyclopedia dataset suggested upregulation of the pathways involved in epithelial mesenchymal transition and inflammatory responses in KRAS^mt/SMAD4^mt cancer cells. Notably, irradiation with therapeutic carbon ions led to robust killing of X-ray-resistant KRAS^mt/SMAD4^mt cancer cells. These data indicate that the KRAS^mt/SMAD4^mt signature is a potential predictor of radioresistance, and that carbon ion radiotherapy is a potential option to treat early-stage cervical cancers with the KRAS^mt/SMAD4^mt signature.     

Deterioration of diacylglycerol‐ and triacylglycerol‐rich oils during frying of potatoes

The stabilities of a commercial diacylglycerol‐rich oil (DAG) and a salad oil (TAG) that had been prepared from a mixture of rapeseed and soybean oils were compared while frying potatoes at 180 °C for 3 h. The representative chemical and physical characteristics of the oils were assessed before and after frying, together with the amount of volatile aldehydes in the exhaust of frying. Among the deterioration indications, the carbonyl value, polymer content, and residual polyunsaturated fatty acid content were similar and not significantly different between the TAG and DAG. On the other hand, the characteristics relating to free fatty acids, i.e. the acid value and emission of chemiluminescence at 100 °C, were greater and the smoke and flash points were lower in the DAG than in the TAG. An irritating odor was generated from the DAG after 1 h of frying and got stronger as frying continued. These results suggested that DAG more easily forms free fatty acids under frying conditions than TAG.     

Intermittent administration of brain-derived neurotrophic factor (BDNF) ameliorates glucose metabolism and prevents pancreatic exhaustion in diabetic mice

We previously demonstrated that repetitive administration of brain-derived neurotrophic factor (BDNF) ameliorates glucose metabolism and energy expenditure in obese diabetic db/db mice. However, we have not evaluated in detail the effect of single or intermittent BDNF administration on glucose metabolism in a diabetic animal model. The objectives of this study were to examine the dose-response effect and dosing interval of BDNF administration in db/db mice and to evaluate the effect of intermittent BDNF administration on pancreatic function in db/db mice. We evaluated the dose-response effect of BDNF by single administration in db/db mice. First, single administration of BDNF greater than 70 mg/kg significantly reduced blood glucose concentration one day after administered, and the BDNF effect was maintained for 6 d. Next, the effects of BDNF administered twice a week at 4, 10, 25, and 62.5 mg/kg on blood glucose concentration, and the effects of BDNF administered once a week at 10, 20, 30, 50, and 70 mg/kg on blood glucose concentration were examined in db/db mice. In the intermittent treatment studies, BDNF dose-dependently ameliorated glucose metabolism by not only the twice-a-week administration but also the once-a-week administration. Lastly, because BDNF reduces the food intake of obese hyperphagic diabetic mice, the effects of BDNF administered once or twice a week on the blood glucose concentration and plasma and pancreatic insulin concentrations in db/db mice were compared with those of the vehicle under pair-fed conditions. Under pair-fed conditions, the intermittent administration of BDNF (25 mg/kg, twice a week, or 50 mg/kg, once a week) significantly reduced the blood glucose concentration and increased the plasma and pancreatic insulin concentrations compared with those in the pair-fed vehicle-treated db/db mice. This indicates that the prolonged hypoglycemic effect of BDNF is not simply due to the reduction of food intake. In conclusion, we demonstrated that the intermittent administration of BDNF ameliorates glucose metabolism and prevents pancreatic exhaustion in obese diabetic mice. These findings indicate that BDNF may have potential as a unique hypoglycemic agent for the treatment of diabetes at a fundamental level with good patient compliance.     

A multi-port D-R mutator using CCIIs with current followers

A multi-port D-R mutator with new current conveyors (CFCCIIs) as the four-port active element is proposed. Each CFCCII consists of a current follower added to a second-generation current conveyor (CCII). This proposed circuit is a simple configuration using CCIIs, CFCCIIs and grounded capacitances and is applied to higher order high-pass filters. This configuration can realize a superior transmission characteristic, inheriting the characteristic of the conventional LC filter. Since all the passive elements are grounded, the influence of parasitic elements of current conveyors can be reduced with this circuit configuration. As a result, this circuit is considered a suitable configuration for monolithic integration. Results obtained from the SPICE simulations show the realized filters have excellent performance and the circuit is effective.     

Component-based robot system design for grasping tasks

The paper presents a robot system design with highly reusable components for a component-based robot system for manipulation tasks. The robot system is designed based on the analysis of manipulation tasks using a unified modeling language use case diagram. For a service robot with locomotion and manipulation mechanisms, reusability of robot system components is improved by adopting the proposed design. Our structure consists of scenario, task, robot information management server, data analyzer, sensor hardware controller, skill, and motion hardware controller on a component-based robot system. Based on the proposed robot system, we implemented a component-based robot system and subsequently realized a grasping motion by a service robot.     

Synergistic effect of Pt or Pd and perovskite oxide for water gas shift reaction

The water gas shift (WGS) reaction over Pt and Pd catalysts supported on various perovskite oxides has been investigated at 573 K without catalyst pretreatment. The Pt and Pd catalysts on LaCoO₃ support showed high catalytic activity. Interaction between Pt or Pd and the support is considered to promote the WGS reaction: Pt/LaCoO₃ had high initial activity but deactivated immediately; Pd/LaCoO₃ was less active than Pt/LaCoO₃, but had superior stability. Catalysts were characterized using XRD, STEM, XPS, and H₂-temperature programmed reduction (TPR). Results of this study showed that reduction of the support decreased the CO conversion on Pt/LaCoO₃. On the other hand, Pd/LaCoO₃ showed stable activity for the WGS reaction. Therefore, Pd was added to Pt/LaCoO₃ for stabilizing the catalyst activity, and 0.5 wt.% Pd/1 wt.% Pt/LaCoO₃ catalyst showed higher activity and stability.     

Functional binders for reversible lithium intercalation into graphite in propylene carbonate and ionic liquid media

Poly(acrylic acid) (PAA), poly(methacrylic acid) (PMA), and poly(vinyl alcohol) (PVA), which have oxygen species as functional groups, were utilized as a binder for graphite electrodes, and the electrochemical reversibility of lithium intercalation was examined in PC medium and ionic liquid electrolyte, lithium bis(trifluoromethanesulfonyl)amide dissolved in 1-butyl-1-methylpyrrolidinium bis(trifluoromethanesulfonyl)amide (BMP-TFSA). Columbic efficiency of 75–80% with more than 300 mAh g^?1 was achieved upon first reduction/oxidation cycle in both electrolytes using these binding polymers, which were significantly improved in comparison to a conventional PVdF binder (less than 45% of columbic efficiency for the first cycle). For the graphite-PVdF electrode, co-intercalation and/or decomposition of PC molecules solvating to Li ions were observed by the electrochemical reduction, resulting in the cracking of graphite particles. In contrast, the co-intercalation and decomposition of PC molecules and BMP cations for the first reduction process were completely suppressed for the graphite electrodes prepared with the polymers containing oxygen atoms. It was proposed that the selective permeability of lithium ions was attained by the uniform coating of the graphite particles with PAA, PMA, and PVA polymers, because the electrostatic interaction between the positively charged lithium ions and negatively charged oxygen atom in the polymer should modulate the desolvation process of lithium ions during the lithium intercalation into graphite, showing the similar functions like artificial solid-electrolyte interphase.     

Formation of a Network Structure in the Gaseous Reduction of Magnetite Doped with Alumina

Reduction of un-doped magnetite is developed topochemically with the formation of a dense iron shell. However, the reduction of alumina-doped magnetite to wüstite proceeds with the formation of a network-like structure which consists of criss-crossed horizontal and vertical plates of wüstite. Reduction of magnetite includes the conversion of Fe³⁺ to Fe²⁺ and the movement of iron cations from the tetrahedral sites on the {400} and {220} planes of magnetite to the octahedral sites on the {200} planes of wüstite. Alumina has a negligibly small solubility in wüstite. In the reduction of magnetite doped with Al₂O₃, rejected Al³⁺ cations from wüstite diffuse to the magnetite–hercynite solid solution. Enrichment of the Fe₃O₄–FeAl₂O₄ solution with alumina in the vicinity of the reduction interface restricts the growth of {220} planes of wüstite and nucleation of {220} planes adjusted to the existing planes, preventing the merging of wüstite plates during the reduction process. Reduction of magnetite from the magnetite–hercynite solid solution practically stops when the Al³⁺ content at the interface approaches the solubility limit. Wüstite in the separated plates is reduced further to iron.     

Crystal growth and structure analysis of twin-free monoclinic hydroxyapatite

Single crystals of hydroxyapatite were grown by a flux method using Ca₃(PO₄)₂ and Ca(OH)₂ under 100 MPa of Ar gas. The crystals obtained had stoichiometric composition of Ca₁₀(PO₄)₆(OH)₂ and some of them were twin-free single crystals. From X-ray diffraction analyses, the space group was confirmed to be monoclinic P2₁/b with cell parameters a=0.9419(3) nm, b=1.8848(6) nm, c=0.6884(2) nm, and =119.98(2)°. The detailed crystal structure was determined with a reliability factor R_w=0.033; the O atoms of OH were located just on the 2₁ axis while the H atoms of OH occupied the positions a little deviated from the 2₁ axis. The origin of this structure was ascribed to the formation of hydrogen bonds between the H atoms of the OH ions and the specific O atoms of the PO₄ ions.     

Protective layer for high‐efficiency PDPs driven at low voltage

Abstract— The sustain pulse voltage of a panel for 66‐kPa Ne + Xe (5–30%) with an (SrCa)O protective layer is 20–40% lower than that with an MgO protective layer. The luminous efficiency of the panel with a Ne + Xe (30%) (SrCa)O protective layer is 1.5 times that of the conventional panel with a Ne + Xe (10%) MgO protective layer; the sustain pulse voltages of these panels are almost the same. The power loss caused by panel capacitance is proportional to the second power of the sustain pulse voltage. Using the (SrCa)O protective layer for Xe (5–30%), the power loss is reduced by 35–60% compared with the MgO protective layer. It follows that, using the (SrCa)O protective layer, we can increase the Xe content with little power loss and thus achieve high‐efficiency PDPs. As for MgO and CaO with Xe ions, electrons are probably ejected from only the defect states. On the other hand, as for the SrO with Xe ions, it is likely that electrons can be ejected from not only defect states but also the valance band. This seems to be the reason why the driving voltage is lower with the (SrCa)O protective layer than with the MgO protective layer.