A pre-heating vaporization technology of coal-water-slurry for the gasification process

A pre-heating vaporization technology of coal water slurry, CWS, was developed to increase the efficiency of coal gasification with the reduction of oxygen consumption. A CWS pre-heating experimental unit having a capacity of 2.0 tons-coal/day was manufactured. After the CWS was heated to 573 K at about 10 MPa, water in CWS was continuously vaporized in a tube of which the diameter increased gradually (2–10 mm I.D.), and dry coal particles with steam were atomized and fed to a vessel. No aggregation of coal particles was observed in the atomized samples. The temperature and the pressure distributions of the fluid were calculated with empirical heat transfer and pressure drop correlations. The calculated results well corresponded to the experimental data measured in some test points. Using the calculation model, a large scale apparatus of 100 tons-coal/day was designed using KNO₃ + NaNO₂ + NaNO₃ molten salt as a heating medium.     

Novel CO2 Absorbents Using Lithium-Containing Oxide

We have discovered a series of lithium-containing oxides that immediately react with ambient carbon dioxide (CO₂) up to 700°C. The products react and return reversibly to the oxides at a temperatures higher than about 700°C. The absorption capacity surpasses that of other CO₂ absorbents by a factor of 10. Utilizing these absorbents, the possibility of a CO₂ separation system that operates at around 500°C is proposed. It is generally believed that a CO₂ separation process operable at temperatures higher than 500°C has the special benefit of a small energy penalty. Moreover, the absorption also proceeds at ambient temperature in the atmospheric environment. This property offers the possibility of many other applications, such as air cleaners or cartridges. Therefore, we think these materials have the potential to make a valuable contribution to the realization of CO₂ emission control.     

Monte Carlo simulation of the sol-gel process for the hydrolysis and polycondensation of tin tetra-n-butoxide

The sol-gel process for the hydrolysis and polycondensation of tin tetra-n-butoxide in butanol was followed by viscosity measurements. The precipitation of tin-containing ultrafine particles was observed without any variation in the solution viscosity in the absence of diethylene glycols, while the viscosity increase was made without any precipitation by the addition of diethylene glycol. The induction period and the rate of the viscosity increase after the induction period was independent of the diethylene glycol content but depended upon the water content. The Monte Carlo simulation data were consistent with data for the viscosity experiment. The simulation was based on a kinetic model of the slow hydrolysis of tin tetra-n-butoxide, the reverse reaction of hydrolysis, and the polycondensation of the hydroxy derivatives.     

Relation between crystal structure and lattice oxygen content of sintered reaction-bonded silicon nitride

When reaction-bonded silicon nitride containing MgO/Y₂O₃ additives is sintered at three different temperatures to form sintered reaction-bonded silicon nitride (SRBSN), the thermal conductivity increases with sintering temperature. The β-Si₃N₄ (silicon nitride) crystals of SRBSN ceramics were synthesized and characterized to investigate the relation between the crystal structure and the lattice oxygen content. The hot-gas extraction measurement result and the crystal structure obtained using Rietveld analysis suggested that the unit cell size of the β-Si₃N₄ crystal increases with the decrease in the lattice oxygen content. This result is reasonable considering that the lattice oxygen with the smaller covalent radius substitutes nitrogen with the larger one in the β-Si₃N₄ crystals. The lattice oxygen content decreased with increasing sintering temperature which also correlated with increase in thermal conductivity. Moreover, it is noteworthy from the viewpoint that it may be possible to apply the lattice constant analysis for the nondestructive and simple measurement of the lattice oxygen content that deteriorates the thermal conductivity of the β-Si₃N₄ ceramics.     

Probability of precision micro-machining of insulating Si3N4 ceramics by EDM

Electrical discharge machining (EDM) is used as a precision machining method for the electrically conductive hard materials with a soft electrode material. But recently we succeeded to machine on insulating material by EDM. The technology is named as an assisting electrode method. The EDMed surface is covered with the electrical conductive layer during discharge. The layer holds the electrical conductivity during discharge. For micro-EDM, the wear of tool electrode becomes lager ratio than the normal machining. So the micro-machining is extremely difficult to get the precision sample.

In this paper to obtain a fine and precise ceramics sample, some trials were carried out considering the EDM conditions, tool electrodes material and assisting electrode materials. Insulating Si₃N₄ ceramics were used for workpiece. The machining properties were estimated by the removal rate and tool wear ratio. To confirm the change of micro-machining process, the discharge waveforms were observed. The micro-machining of the Ø0.05 mm hole could be machined with the commercial sinking electrical discharge machine.     

Fourier-transform speckle profilometry: three-dimensional shape measurements of diffuse objects with large height steps and/or spatially isolated surfaces

An interferometric technique for automated profilometry of diffuse objects has been proposed. It is based on the Fourier-fringe analysis of spatiotemporal specklegrams produced by a wavelength-shift interferometer with a laser diode as a frequency-tunable light source. Unlike conventional moiré techniques the proposed technique permits the objects to have discontinuous height steps and/or surfaces spatially isolated from one another. Experimental results are presented that demonstrate the validity of the principle.     

Carbon felt-based bioelectrocatalytic flow-through detectors: Highly sensitive amperometric determination of H2O2 based on a direct electrochemistry of covalently modified horseradish peroxidase using cyanuric chloride as a linking agent

Horseradish peroxidase (HRP) was chemically modified using cyanuric chloride (CC) as a linking agent onto a carbon felt (CF), which is a microelectrode ensemble of micro carbon fiber (>7 μm, diameter) with a random three-dimensional structure. The resulting HRP-modified CF (HRP-ccCF) exhibited well-defined redox waves based on the HRP heme Fe^III/Fe^II redox couple at −0.23 V vs. Ag/AgCl (at pH 7.0), while the HRP-adsorbed CF (HRP-CF) showed no apparent redox couple in the same potential range, indicating that the chemical modification of HRP via CC facilitated the direct electron transfer (DET) between HRP and CF. The apparent heterogeneous electron transfer rate constant k_s was estimated to be 35 s⁻¹. Cyclic voltammetry and electrochemical impedance spectroscopy revealed that the interfacial properties (i.e., structure, morphology of enzyme-layer) of covalently modified HRP (HRP-ccCF) and physically adsorbed HRP (HRP-CF) are different, resulting in the difference in the electron transfer properties. The HRP-ccCF was successfully used as a working electrode unit in bioelectrocatalytic flow-through detector for highly sensitive amperometric determination of H₂O₂. Under the optimized conditions (i.e., applied potential, 0 V vs. Ag/AgCl; carrier flow rate, 3.25 ml/min; and carrier pH 7.0), the cathodic peak current of H₂O₂ linearly increased up to 3 μM (sensitivity, 1.94 μA/μM; the detection limit, 0.08 μM [S/N = 3]) with sample through-put of ca. 90 samples/h.     

An empirical anisotropy correction model for estimating land surface albedo for radiation budget studies

Land surface albedo is one of the key parameters in the radiation budget, the hydrological cycle and climate modeling studies. It is now widely understood that large errors may occur in the estimation of surface albedo without taking into consideration the anisotropy reflectance effect, which is a general feature of the earth surface. Two major anisotropic correction methods exist for the retrieval of land surface albedo under clear sky conditions. One method involves linearly converting from top of the atmosphere (TOA) albedo to surface albedo, and another is based on the inversion of the Bidirectional Reflectance Distribution Function (BRDF) model of the surface. In the present study, a new approach that utilizes an empirical model for estimating surface albedo has been proposed for snow free land surfaces under clear sky conditions. We analyzed the bidirectional reflectance data set with numerous samples representing various land cover types, which derived from POLDER/ADEOS-1 multi-angle imagery data and distributed by MEDIAS-France. Through the analysis, an empirical relation between bidirectional reflectance and albedo was established and has been discussed in detail. The proposed model can be used for direct estimation of surface albedo from a single BRF observation when the sun-target-sensor geometry is known. No BRDF model inversion scheme is necessary. The present model has no or weak dependence on the existing land surface classifications, and is insensitive to wavelength. The theoretical absolute accuracy of the estimated albedo is approximately 0.010 for visible (0.4-0.7 μm), 0.023 for near infrared (0.7-3.0 μm) and 0.016 for shortwave (0.2-3.0 μm), respectively. Albedo consistency with viewing geometry has been verified, resulting in good agreement for albedo estimated from various viewing directions. Validation of the satellite estimated albedo derived by the proposed method, using field observations were also presented and results show it can give reasonably accurate estimation. The proposed method is expected to be a suitable candidate for practical applications of albedo estimation for sensors that do not perform multi-angle observations.     

The motion capturing of female divers under water and the trial production of motion viewers for developing a virtual diving experience learning system

The virtual diving experience learning system of “Ama”, Japanese traditional female divers, has been developed to simulate how divers move in a virtual space using the diving interface and utilizing an accelerometer and a gyroscope. This interface not only detects the diving motion but also outputs the movement. Diving motion is shown in the ways of hand motion while standing. Although this makes it possible for a learner to understand the divers’ actions more clearly, this system’s difficulty is in visualizing a divers’ actions including their hands or bodies. Therefore, our study focuses on developing the operation system to reproduce actual ways of Amas’ diving with a virtual human body in a virtual space. First, the motion capture was done in an underwater condition. In the next process, the virtual human body was created. Finally, with the motion viewer, the more vivid actions of the Ama were successfully reproduced much more than in previous attempts. Using this system, the effectiveness of the Amas’ movement learning was confirmed, because a learner practices Amas’ movement.